
International Harvester 4366
Power
225 hp
Production
1973-1976
Engine
Turbocharged diesel, 6-cylinder
Transmission
Fuller syncromesh
Weight
21,690 lbs [9838 kg]
Drive
4WD
From the same series:
Introduction
Production Information of International Harvester, 4366
The production information of the tractor (4366) includes details about its manufacturing.
| Original price was $37,360 in 1976 |
| Built in Fargo, North Dakota, USA |
| Four-wheel Drive (4WD) tractor |
| Distributor | International Harvester |
|---|---|
| Manufacturer | Steiger |
Dimension and Tires Information of International Harvester, 4366
This section sums up the dimension and tires information of the tractor.
| Clearance (drawbar) | 16.5 inches [41 cm] |
|---|---|
| Wheelbase | 118 inches [299 cm] |
| Operating weight | 21,690 lbs [9838 kg] |
| Height (cab) | 128 inches [325 cm] |
| Length | 241 inches [612 cm] |
| Ballasted weight | 23,000 lbs [10432 kg] |
| Width | 116 inches*Minimum width. [294 cm] |
| Ag front | 28.1-26 |
|---|---|
| Ag rear | 18.4-38 |
| Ag rear | 28.1-26 |
| Ag front | 18.4-38 |
Engine Specifications of International Harvester, 4366
Get the specifications for the engine and if different options are available.
| International Harvester DT-466 |
| Liquid-cooled |
| Turbocharged diesel |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 466 ci [7.6 L] |
| Compression | 15.1:1 |
| Bore/Stroke | 4.30x5.35 inches [109 x 136 mm] |
| Coolant capacity | 36 qts [34.1 L] |
| Oil capacity | 18 qts [17.0 L] |
| Idle RPM | 850-2600 |
| Rated RPM | 2600 |
| Power | 225 hp [167.8 kW] |
Transmission Information of International Harvester, 4366Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Five forward speeds, plus one reverse, with high and low ranges. |
| Transmission | Fuller syncromesh |
|---|---|
| Gears | 10 forward and 2 reverse |
Mechanical Specs of International Harvester, 4366Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with heater. |
| Integral hydraulic caliper disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of International Harvester, 4366Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Https://www.tractordata.com/farm-tractors/000/3/8/389-international-harvester-4366-tests.html |
Hydraulics Specifications of International Harvester, 4366
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 17 gpm [64.3 lpm] |
| Pump flow | 22 gpm [83.3 lpm] |
| Capacity | 31 gal [117.3 L] |
| Rear valves | 2 |
Frequently asked questions
How much horsepower does the International Harvester 4366 have?
The International Harvester 4366 delivers 225 HP.
What years was the International Harvester 4366 produced?
The International Harvester 4366 was produced in 1973-1976.
What engine does the International Harvester 4366 have?
The International Harvester 4366 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the International Harvester 4366 use?
The International Harvester 4366 uses a Fuller syncromesh transmission.
How much does the International Harvester 4366 weigh?
The International Harvester 4366 weighs 21,690 lbs [9838 kg].
Is the International Harvester 4366 4WD?
The International Harvester 4366 is available in 4WD.