International Harvester 5088
Power
150 hp[P] hp
Production
1981-1985
Engine
Turbocharged diesel, 6-cylinder
Transmission
Synchro Tri-Six (STS)
Drive
2WD/4WD
From the same series:
Introduction
Production Information of International Harvester, 5088
The production information of the tractor (5088) includes details about its manufacturing.
| Original price was $54,300 in 1985 |
| Row-Crop tractor |
| Built in Rock Island, Illinois, USA |
| Manufacturer | International Harvester |
|---|---|
| Total built | 8,176 |
Dimension and Tires Information of International Harvester, 5088
This section sums up the dimension and tires information of the tractor.
| Front tread | 60 to 84 inches [152 to 213 cm] |
|---|---|
| Wheelbase | 111.6 inches [283 cm] |
| Ground clearance | 17.2 inches [43 cm] |
| Height | 115 inches [292 cm] |
| Length | 196.6 inches [499 cm] |
| Bar rear axle | 3.50 by 112 inches [88 by 2844 mm] |
| Width | 112 inches [284 cm] |
| Ag front | 10.00-16 |
|---|---|
| Ag rear | 18.4-38 |
Engine Specifications of International Harvester, 5088
Get the specifications for the engine and if different options are available.
| International Harvester DT-436B |
| Liquid-cooled inline |
| Turbocharged diesel |
| 6-cylinder |
| Coolant capacity | 29 qts [27.4 L] |
|---|---|
| Displacement | 436 ci [7.1 L] |
| Idle RPM | 900-2655 |
| Bore/Stroke | 4.30x5.00 inches [109 x 127 mm] |
| Oil capacity | 20 qts [18.9 L] |
| Starter volts | 12 |
| Rated RPM | 2400 |
Transmission Information of International Harvester, 5088Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Left lever selects gear, right lever selects high, medium, low, or reverse range. Clutch-free on-the-move power shift in gear pairs 1/2, 3/4, and 5/6. Synchronized on-the-move shifting (with the clutch) between pairs. |
| Transmission | Synchro Tri-Six (STS) |
|---|---|
| Oil capacity | 174 qts [164.7 L] |
| Type | Partial power shift |
| Gears | 18 forward and 6 reverse |
Mechanical Specs of International Harvester, 5088Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard with heat and air-conditioning. Optional burgundy or western interior finish. |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of International Harvester, 5088Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of International Harvester, 5088
Hydraulic system type, pressure, pump flow and valves.
| 82 gpmOptOptional [310.4 lpm] | |
| Type | Closed center |
| 40 gpmOptOptional [151.4 lpm] | |
| Pump flow | 25 gpm [94.6 lpm] |
| Capacity | 43.5 gal [164.6 L] |
| Steering flow | 12 gpm [45.4 lpm] |
| Total flow | 67 gpm [253.6 lpm] |
| Valves | 2 |
Three-Point Hitch of International Harvester, 5088
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| Rear lift | 6990 lbs [3170 kg] |
| 8280 lbsOptOptional [3755 kg] |
Electrical System of International Harvester, 5088
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the International Harvester 5088 have?
The International Harvester 5088 delivers 150 hp[P] HP.
What years was the International Harvester 5088 produced?
The International Harvester 5088 was produced in 1981-1985.
What engine does the International Harvester 5088 have?
The International Harvester 5088 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the International Harvester 5088 use?
The International Harvester 5088 uses a Synchro Tri-Six (STS) transmission.
Is the International Harvester 5088 4WD?
The International Harvester 5088 is available in 2WD/4WD.