Introduction
Production Information of International Harvester, 633
The production information of the tractor (633) includes details about its manufacturing.
| Utility tractor |
| Built in Neuss, Germany |
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, 633
This section sums up the dimension and tires information of the tractor.
| 4WD Shipping weight | 5589 lbs [2535 kg] |
|---|---|
| 2WD Wheelbase | 81.5 inches [207 cm] |
| Height | 93.5 inches [237 cm] |
| Width | 64.7 inches [164 cm] |
| 4WD Wheelbase | 79.9 inches [202 cm] |
| Front tread | 48.5 to 69.7 inches [123 to 177 cm] |
| 2WD Shipping weight | 5158 lbs [2339 kg] |
| Length | 135.8 inches [344 cm] |
| Rear tread | 56.2 to 76.9 inches [142 to 195 cm] |
| 2WD Standard tires (ag) | Front: 6.50-16. Rear: 12.4/11-36 |
|---|---|
| 4WD Optional tires (ag) | Front: 10.5-18. Rear: 16.9/14-28 |
| 4WD Standard tires (ag) | Front: 10.5-20. Rear: 12.4/11-36 |
| 2WD Optional tires (ag) | Front: 7.50-16. Rear: 11.2/10-36 |
Engine Specifications of International Harvester, 633
Get the specifications for the engine and if different options are available.
| International Harvester D-179 |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Power | 52 hp [38.8 kW] |
|---|---|
| Displacement | 179 ci [2.9 L] |
| Rated RPM | 2180 |
| Bore/Stroke | 3.875x5.0625 inches [98 x 129 mm] |
| Starter volts | 12 |
Transmission Information of International Harvester, 633Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in two ranges, plus reverse range. |
| Gears | 8 forward and 4 reverse |
|---|
Transmission variants 2
| Transmission | Synchron |
|---|---|
| Gears | 16 forward and 8 reverse |
| 8-speed |
| 16-speed |
Mechanical Specs of International Harvester, 633Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Disc brakes |
| Open operator station. Cab optional with heater. |
Power Information of International Harvester, 633Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of International Harvester, 633
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 3.2 gal [12.1 L] |
|---|---|
| Pump flow | 8.6 gpm [32.6 lpm] |
Three-Point Hitch of International Harvester, 633
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift | 3969 lbs [1800 kg] |
Electrical System of International Harvester, 633
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the International Harvester 633 have?
The International Harvester 633 delivers 52 HP.
What years was the International Harvester 633 produced?
The International Harvester 633 was produced in 1975-1978.
What engine does the International Harvester 633 have?
The International Harvester 633 is powered by a Diesel, 3-cylinder engine.
How much does the International Harvester 633 weigh?
The International Harvester 633 weighs 5589 lbs [2535 kg].
Is the International Harvester 633 4WD?
The International Harvester 633 is available in 2WD/4WD.