Introduction
Production Information of International Harvester, 745
The production information of the tractor (745) includes details about its manufacturing.
| Built in Neuss, Germany |
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, 745
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 64.8 to 71.4 inches [164 to 181 cm] |
|---|---|
| 2WD Wheelbase | 87.6 inches [222 cm] |
| Width | 80.3 inches [203 cm] |
| 4WD Length | 150 inches [381 cm] |
| 4WD Wheelbase | 86.2 inches [218 cm] |
| 2WD Ground clearance | 19.1 inches [48 cm] |
| Height (ROPS) | 100 inches [254 cm] |
| 2WD Length | 148.4 inches [376 cm] |
| Rear tread | 62.2 to 78 inches [157 to 198 cm] |
| 2WD Front tread | 52.9 to 71.8 inches [134 to 182 cm] |
| 4WD Ground clearance | 15.9 inches [40 cm] |
| Height (cab) | 105.1 inches [266 cm] |
| 2WD Standard tires (ag) | Front: 7.50-18. Rear: 16.9R34 |
|---|---|
| 4WD Standard tires (ag) | Front: 12.4R24. Rear: 16.9R34 |
Engine Specifications of International Harvester, 745
Get the specifications for the engine and if different options are available.
| International Harvester D-239 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 238.65 ci [3.9 L] |
| Rated RPM | 2300 |
| Bore/Stroke | 3.875x5.06 inches [98 x 129 mm] |
| Oil change | 200 h |
| Oil capacity | 9.5 qts [9.0 L] |
| Torque RPM | 1600 |
| Torque | 185.1 lb-ft [251.0 Nm] |
| Power | 72 hp [53.7 kW] |
Transmission Information of International Harvester, 745Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in two ranges, plus reverse range, with two-speed power shift. |
| Transmission | IH Synchron |
|---|---|
| Type | Two-speed power shift |
| Gears | 16 forward and 8 reverse |
Transmission variants 2
| Four gears in two ranges, plus reverse range. |
| Type | Gear |
|---|---|
| Gears | 8 forward and 4 reverse |
Transmission variants 3
| Type | Creeper |
|---|---|
| Gears | 16 forward and 8 reverse |
| 16-speed two-speed power shift |
| 8-speed gear |
| 16-speed creeper |
Mechanical Specs of International Harvester, 745Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Four-post ROPS. Cab with heat on 745 XL. |
Power Information of International Harvester, 745Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live |
|---|---|
| Rear PTO Type | 540 |
| 540/1000 OptOptional |
Hydraulics Specifications of International Harvester, 745
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 7.9 gpm [29.9 lpm] |
|---|
Three-Point Hitch of International Harvester, 745
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and lower-link draft control. |
| Rear lift | 6945 lbs [3150 kg] |
Electrical System of International Harvester, 745
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery AH | 88 |
| Charging amps | 33 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the International Harvester 745 have?
The International Harvester 745 delivers 72 HP.
What years was the International Harvester 745 produced?
The International Harvester 745 was produced in 1980-1989.
What engine does the International Harvester 745 have?
The International Harvester 745 is powered by a Diesel, 4-cylinder engine.
What transmission does the International Harvester 745 use?
The International Harvester 745 uses a IH Synchron transmission.
Is the International Harvester 745 4WD?
The International Harvester 745 is available in 2WD/4WD.