Introduction
Production Information of Iseki, SX55
The production information of the tractor (SX55) includes details about its manufacturing.
| Utility tractor |
| Built in Japan |
| Manufacturer | Iseki |
|---|
Dimension and Tires Information of Iseki, SX55
This section sums up the dimension and tires information of the tractor.
| Rear tread | 50.4 to 69.7 inches [128 to 177 cm] |
|---|---|
| Wheelbase | 85 inches [215 cm] |
| Ground clearance | 12.4 inches [31 cm] |
| Weight | 3053 lbs [1384 kg] |
| Length | 140.2 inches [356 cm] |
| Front tread | 53.2 to 60.2 inches [135 to 152 cm] |
| Height (exhaust) | 74.2 inches [188 cm] |
| Standard tires (ag) | Front: 8.3-20. Rear: 14.9-28 |
|---|
Engine Specifications of Iseki, SX55
Get the specifications for the engine and if different options are available.
| Isuzu 4JB1 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Rated RPM | 2200 |
|---|---|
| Displacement | 169.1 ci [2.8 L] |
| Fuel system | Direct injection |
| Bore/Stroke | 3.66x4.02 inches [93 x 102 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Pre-heating | Glow plugs |
| Air cleaner | Dry |
| Power | 50 hp [37.3 kW] |
Transmission Information of Iseki, SX55Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Syncromesh |
|---|---|
| Gears | 12 forward and 4 reverse |
| Clutch | 330mm dry disc |
Transmission variants 2
| Type | Creeper |
|---|---|
| Gears | 24 forward and 8 reverse |
| Clutch | 330mm dry disc |
| 12-speed syncromesh |
| 24-speed creeper |
Mechanical Specs of Iseki, SX55Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Four-post ROPS with canopy. |
| Power steering |
| Wet disc brakes |
Power Information of Iseki, SX55Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2000 | |
| Engine RPM | 540@1727 |
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Iseki, SX55
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 9.25 gpm [35.0 lpm] |
|---|
Three-Point Hitch of Iseki, SX55
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift | 5291 lbs [2399 kg] |
Electrical System of Iseki, SX55
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Iseki SX55 have?
The Iseki SX55 delivers 50 HP.
What years was the Iseki SX55 produced?
The Iseki SX55 was produced in 1985-1990.
What engine does the Iseki SX55 have?
The Iseki SX55 is powered by a Diesel, 4-cylinder engine.
What transmission does the Iseki SX55 use?
The Iseki SX55 uses a Syncromesh transmission.
How much does the Iseki SX55 weigh?
The Iseki SX55 weighs 3053 lbs [1384 kg].
Is the Iseki SX55 4WD?
The Iseki SX55 is available in 2WD/4WD.