Introduction
Production Information of Iseki, SX75
The production information of the tractor (SX75) includes details about its manufacturing.
| Utility tractor |
| Built in Japan |
| Manufacturer | Iseki |
|---|
Dimension and Tires Information of Iseki, SX75
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 57.5 to 78 inches [146 to 198 cm] |
|---|---|
| 2WD Wheelbase | 88 inches [223 cm] |
| Ground clearance | 15.2 inches [38 cm] |
| Height (exhaust) | 104.1 inches [264 cm] |
| 4WD Wheelbase | 88.8 inches [225 cm] |
| Rear tread | 55.5 to 79.1 inches [140 to 200 cm] |
| 2WD Front tread | 55.9 to 72.7 inches [141 to 184 cm] |
| Length | 152.8 inches [388 cm] |
| 2WD Standard tires (ag) | Front: 10.00-16. Rear: 18.4-30 |
|---|---|
| 4WD Standard tires (ag) | Front: 11.2-24. Rear: 18.4-30 |
Engine Specifications of Iseki, SX75
Get the specifications for the engine and if different options are available.
| Isuzu 4BD1 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Rated RPM | 2200 |
|---|---|
| Displacement | 235.3 ci [3.9 L] |
| Fuel system | Direct injection |
| Bore/Stroke | 4.016x4.646 inches [102 x 118 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Pre-heating | Glow plugs |
| Air cleaner | Dual dry element |
| Power | 70 hp [52.2 kW] |
Transmission Information of Iseki, SX75Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Syncromesh |
|---|---|
| Gears | 12 forward and 4 reverse |
| Clutch | 330.2mm dry disc |
Transmission variants 2
| Transmission | Super Shift |
|---|---|
| Gears | 24 forward and 8 reverse |
| 12-speed syncromesh |
| 24-speed |
Mechanical Specs of Iseki, SX75Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Four-post ROPS. Cab optional with air-conditioning. |
| Power steering |
| Wet disc brakes |
Power Information of Iseki, SX75Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2000 | |
| Engine RPM | 540@1789 |
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of Iseki, SX75
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 13.2 gpm [50.0 lpm] |
|---|
Three-Point Hitch of Iseki, SX75
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift | 6834 lbs [3099 kg] |
Electrical System of Iseki, SX75
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery AH | 110 |
Frequently asked questions
How much horsepower does the Iseki SX75 have?
The Iseki SX75 delivers 70 HP.
What years was the Iseki SX75 produced?
The Iseki SX75 was produced in 1985-1990.
What engine does the Iseki SX75 have?
The Iseki SX75 is powered by a Diesel, 4-cylinder engine.
What transmission does the Iseki SX75 use?
The Iseki SX75 uses a Syncromesh transmission.
Is the Iseki SX75 4WD?
The Iseki SX75 is available in 2WD/4WD.