Iseki TM3215
Power
19 hp
Production
2010-2020
Engine
Diesel, 3-cylinder
Transmission
Gear
Weight
1808 lbs (gear) [820 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Iseki, TM3215
The production information of the tractor (TM3215) includes details about its manufacturing.
| Compact Utility tractor |
| Manufacturer | Iseki |
|---|
Dimension and Tires Information of Iseki, TM3215
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 61.42 inches [156 cm] |
|---|---|
| 1830 lbs (hydro) [830 kg] | |
| Weight | 1808 lbs (gear) [820 kg] |
| Length | 110.4 inches [280 cm] |
| Ground clearance | 9.1 inches [23 cm] |
| Width | 43.7 inches [110 cm] |
| Ag front | 6-12 |
|---|---|
| Lawn/turf rear | 31x13.50-15 |
| Ag rear | 9.5-16 |
| Lawn/turf front | 22x8.00-12 |
Engine Specifications of Iseki, TM3215
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Power | 19.2 hp [14.3 kW] |
|---|---|
| Displacement | 68.5 ci [1.1 L] |
| Rated RPM | 2500 |
| Bore/Stroke | 3.08x3.07 inches [78 x 78 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Iseki, TM3215Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 8 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| 8-speed gear |
| Hydrostatic |
Mechanical Specs of Iseki, TM3215Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post ROPS. |
| Wet disc brakes |
| Differential lock | Standard |
|---|---|
| Steering | Hydrostatic power |
Power Information of Iseki, TM3215Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Mid PTO Type | 2000 |
|---|---|
| Rear PTO | Independent (hydro) |
| Engine RPM | 545@2500 (gear) |
| Rear PTO Type | 540 (1.375) |
| Clutch | Mechanical (gear) |
| Engine RPM | 2032@2500 (gear) |
| 550@2500 (hydro) | |
| Electro-hydraulic (hydro) | |
| 2047@2500 (hydro) |
Hydraulics Specifications of Iseki, TM3215
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 5.31 gpm [20.1 lpm] |
|---|
Three-Point Hitch of Iseki, TM3215
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position control |
| Rear lift | 1323 lbs [600 kg] |
Electrical System of Iseki, TM3215
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Iseki TM3215 have?
The Iseki TM3215 delivers 19 HP.
What years was the Iseki TM3215 produced?
The Iseki TM3215 was produced in 2010-2020.
What engine does the Iseki TM3215 have?
The Iseki TM3215 is powered by a Diesel, 3-cylinder engine.
What transmission does the Iseki TM3215 use?
The Iseki TM3215 uses a Gear transmission.
How much does the Iseki TM3215 weigh?
The Iseki TM3215 weighs 1808 lbs (gear) [820 kg].
Is the Iseki TM3215 4WD?
The Iseki TM3215 is available in 4WD.