Introduction
Production Information of John Deere, 1030
The production information of the tractor (1030) includes details about its manufacturing.
| Utility tractor |
| Built in Mannheim, Baden-Württemberg, Germany |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 1030
This section sums up the dimension and tires information of the tractor.
| Rear tread | 53.2 to 76.8 inches [135 to 195 cm] |
|---|---|
| Wheelbase | 80.7 inches [204 cm] |
| Shipping weight | 4720 lbs [2140 kg] |
| Weight | 5954 lbs [2700 kg] |
| Length | 133 inches [337 cm] |
| Front tread | 49.6 to 75.8 inches [125 to 192 cm] |
| Width | 65.9 inches [167 cm] |
| Ag front | 6.50-16 |
|---|---|
| Ag rear | 12.4-36 |
Engine Specifications of John Deere, 1030
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Firing order | 1-2-3 |
|---|---|
| Torque RPM | 1400 |
| Coolant capacity | 11 qts [10.4 L] |
| Power (gross) | 48.3 hp [36.0 kW] |
| Starter | Electric |
| Compression | 16.2:1 |
| Rated RPM | 2500 |
| Air cleaner | Dry |
| Displacement | 164.4 ci [2.7 L] |
| Power (net) | 45.6 hp [34.0 kW] |
| Bore/Stroke | 4.02x4.33 inches [102 x 110 mm] |
| Torque | 112 lb-ft [151.9 Nm] |
| Starter volts | 12 |
| Oil capacity | 6 qts [5.7 L] |
| Operating RPM | 1400-2500 |
| Idle RPM | 650-2650 |
Transmission Information of John Deere, 1030Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Oil capacity | 38 qts [36.0 L] |
| Gears | 8 forward and 4 reverse |
| Clutch | Dry disc |
Transmission variants 2
| Gears | 16 forward and 8 reverse |
|---|
| 8-speed gear |
| 16-speed |
Mechanical Specs of John Deere, 1030Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Open operator station. |
| Two-wheel drive |
| Hydraulic wet disc brakes |
| Steering | Power OptOptional |
|---|---|
| Steering | Manual |
| Final drives | Planetary |
| Differential lock | Mechanical rear |
Power Information of John Deere, 1030Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@2100 |
Hydraulics Specifications of John Deere, 1030
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| 12.4 gpmOptOptional [46.9 lpm] | |
| Pressure | 2248 psi [155.0 bar] |
| Pump flow | 6.6 gpm [25.0 lpm] |
Three-Point Hitch of John Deere, 1030
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Position control and lower-link draft sensing |
| Rear lift | 4024 lbs [1825 kg] |
Electrical System of John Deere, 1030
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery AH | 55 |
| Charging amps | 28 |
Frequently asked questions
How much horsepower does the John Deere 1030 have?
The John Deere 1030 delivers 48 HP.
What years was the John Deere 1030 produced?
The John Deere 1030 was produced in 1973-1979.
What engine does the John Deere 1030 have?
The John Deere 1030 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 1030 use?
The John Deere 1030 uses a Gear transmission.
How much does the John Deere 1030 weigh?
The John Deere 1030 weighs 4720 lbs [2140 kg].
Is the John Deere 1030 4WD?
The John Deere 1030 is available in 2WD.