Introduction
Production Information of John Deere, 4066M
The production information of the tractor (4066M) includes details about its manufacturing.
| Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 4066M
This section sums up the dimension and tires information of the tractor.
| Front tread | 53.6 inches [136 cm] |
|---|---|
| Wheelbase | 73 inches [185 cm] |
| Weight | 3770 lbs [1710 kg] |
| Height (cab) | 97.4 inches [247 cm] |
| Length | 130.6 inches [331 cm] |
| Rear tread | 59.9 inches [152 cm] |
| Clearance (front axle) | 13.8 inches [35 cm] |
| Height (ROPS) | 100.2 inches [254 cm] |
| Ag front | 8.00-16 |
|---|---|
| Lawn/turf rear | 44x18-20 |
| Ag rear | 13.6-28 |
| Lawn/turf front | 27x10.50-15 |
Engine Specifications of John Deere, 4066M
Get the specifications for the engine and if different options are available.
| Yanmar 4TNV86 |
| Liquid-cooled inline |
| Turbocharged diesel |
| 4-cylinder |
| Oil capacity | 5.6 qts [5.3 L] |
|---|---|
| Emission control | Diesel particulate filter (DPF) |
| Rated Power (gross) | 65.0 hp [48.5 kW] |
| Torque | 153 lb-ft [207.5 Nm] |
| Rated RPM | 2600 |
| Displacement | 127.5 ci [2.1 L] |
| Emissions | Tier IV |
| Bore/Stroke | 3.39x3.54 inches [86 x 90 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque RPM | 1690 |
Transmission Information of John Deere, 4066MY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | PowrReverser |
|---|---|
| Clutch | Wet disc |
| Type | Power shuttle |
| Gears | 12 forward and reverse |
Transmission variants 2
| Transmission | EHydro |
|---|---|
| Type | Hydrostatic |
| Gears | Infinite forward and reverse (3-range) |
| 12-speed power shuttle |
| Hydrostatic |
Mechanical Specs of John Deere, 4066MY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Two-post folding ROPS. |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of John Deere, 4066MY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@2400 |
Hydraulics Specifications of John Deere, 4066M
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 5.7 gpm [21.6 lpm] |
| Total flow | 15.9 gpm [60.2 lpm] |
| Pressure | 2500 psi [172.4 bar] |
| Pump flow | 10.2 gpm [38.6 lpm] |
Three-Point Hitch of John Deere, 4066M
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 2500 lbs [1134 kg] |
| Control | Position control |
| Rear lift (at ends) | 3130 lbs [1419 kg] |
Electrical System of John Deere, 4066M
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 770 |
| Charging system | Alternator |
| Charging amps | 75 |
Frequently asked questions
How much horsepower does the John Deere 4066M have?
The John Deere 4066M delivers 65 HP.
What years was the John Deere 4066M produced?
The John Deere 4066M was produced in 2014-2024.
What engine does the John Deere 4066M have?
The John Deere 4066M is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the John Deere 4066M use?
The John Deere 4066M uses a PowrReverser transmission.
How much does the John Deere 4066M weigh?
The John Deere 4066M weighs 3770 lbs [1710 kg].
Is the John Deere 4066M 4WD?
The John Deere 4066M is available in 4WD.