Introduction
Production Information of John Deere, 4075R
The production information of the tractor (4075R) includes details about its manufacturing.
| Original price was $68,049 in 2024 |
| Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 4075R
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 73 inches [185 cm] |
|---|---|
| Height (cab) | 97.4 inches [247 cm] |
| Length | 133.4 inches [338 cm] |
| Width | 78.3 inches [198 cm] |
| Standard tires (ag) | Front: 8-16. Rear: 13.6-28 |
|---|
Engine Specifications of John Deere, 4075R
Get the specifications for the engine and if different options are available.
| Yanmar 4TNV86 |
| Liquid-cooled inline |
| Turbocharged diesel |
| 4-cylinder |
| Torque RPM | 1690 |
|---|---|
| Torque | 194.7 lb-ft [264.0 Nm] |
| Coolant capacity | 8 qts [7.6 L] |
| Emission control | Diesel particulate filter (DPF) |
| Starter | Electric |
| Fuel system | High-pressure common rail |
| Air cleaner | Dry |
| Rated Power (gross) | 74.3 hp [55.4 kW] |
| Displacement | 127.5 ci [2.1 L] |
| Emissions | Tier IV |
| Bore/Stroke | 3.39x3.54 inches [86 x 90 mm] |
| Idle RPM | 900-2750 |
| Starter volts | 12 |
| Oil capacity | 5.7 qts [5.4 L] |
| Rated RPM | 2600 |
| Compression | 17.3:1 |
Transmission Information of John Deere, 4075RY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
Mechanical Specs of John Deere, 4075RY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Power steering |
| Cab standard with air-conditioning. |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of John Deere, 4075RY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 540E@1750 | |
| Engine RPM | 540@2600 |
| Clutch | Wet disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of John Deere, 4075R
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Valves | 3 to 5 |
| Total flow | 15.9 gpm [60.2 lpm] |
Three-Point Hitch of John Deere, 4075R
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Rear lift (at 24"/610mm) | 2500 lbs [1134 kg] |
| Control | Position control |
| Rear lift (at ends) | 3130 lbs [1419 kg] |
Electrical System of John Deere, 4075R
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 770 |
| Charging system | Alternator |
| Charging amps | 75 |
Frequently asked questions
How much horsepower does the John Deere 4075R have?
The John Deere 4075R delivers 74 HP.
What years was the John Deere 4075R produced?
The John Deere 4075R was produced in 2024+.
What engine does the John Deere 4075R have?
The John Deere 4075R is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the John Deere 4075R use?
The John Deere 4075R uses a Hydrostatic transmission.
Is the John Deere 4075R 4WD?
The John Deere 4075R is available in 4WD.