Introduction
Production Information of John Deere, 4105
The production information of the tractor (4105) includes details about its manufacturing.
| Original price was $23,634 in 2015 |
| Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 4105
This section sums up the dimension and tires information of the tractor.
| Max weight | 7199 lbs [3265 kg] |
|---|---|
| Wheelbase | 68 inches [172 cm] |
| Height (ROPS) | 87.6 inches [222 cm] |
| Height (hood) | 57.1 inches [145 cm] |
| Length | 120.2 inches [305 cm] |
| Clearance (front axle) | 14.7 inches [37 cm] |
| Shipping weight | 2987 lbs [1354 kg] |
| Width | 65.8 inches [167 cm] |
| Ag front | 8-16 |
|---|---|
| Ag rear | 14.9-24 |
Engine Specifications of John Deere, 4105
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 3-cylinder |
| Coolant capacity | 5.6 qts [5.3 L] |
|---|---|
| Air cleaner | Dry |
| Compression | 19:1 |
| Torque | 91.8 lb-ft [124.5 Nm] |
| Rated RPM | 2800 |
| Displacement | 91.5 ci [1.5 L] |
| Oil capacity | 4.5 qts [4.3 L] |
| Power | 41 hp [30.6 kW] |
| Bore/Stroke | 3.30x3.54 inches [84 x 90 mm] |
| Starter power | 1.9 hp [1.4 kW] |
| Starter volts | 12 |
| Torque RPM | 1900 |
Transmission Information of John Deere, 4105Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 33.2 qts [31.4 L] |
Mechanical Specs of John Deere, 4105Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post foldable ROPS. |
| Power steering |
| Wet disc brakes |
Power Information of John Deere, 4105Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 4105
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 5.7 gpm [21.6 lpm] |
|---|---|
| Type | Open center |
| Pump flow | 9.2 gpm [34.8 lpm] |
| Valves | 2 |
| Capacity | 8.3 gal [31.4 L] |
| Steering press. | 1500 psi [103.4 bar] |
| Total flow | 14.8 gpm [56.0 lpm] |
| Pressure | 2500 psi [172.4 bar] |
Three-Point Hitch of John Deere, 4105
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 2530 lbs [1147 kg] |
| Rear lift (at 24"/610mm) | 2200 lbs [997 kg] |
Electrical System of John Deere, 4105
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere 4105 have?
The John Deere 4105 delivers 41 HP.
What years was the John Deere 4105 produced?
The John Deere 4105 was produced in 2008-2014.
What engine does the John Deere 4105 have?
The John Deere 4105 is powered by a 3-cylinder engine.
What transmission does the John Deere 4105 use?
The John Deere 4105 uses a Hydrostatic transmission.
How much does the John Deere 4105 weigh?
The John Deere 4105 weighs 7199 lbs [3265 kg].
Is the John Deere 4105 4WD?
The John Deere 4105 is available in 4WD.