John Deere 4960
Power
222 hp[P] hp
Production
1992-1994
Engine
Turbocharged aftercooled diesel, 6-cylinder
Transmission
John Deere Power Shift
Drive
2WD/4WD
From the same series:
Introduction
Production Information of John Deere, 4960
The production information of the tractor (4960) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Waterloo, Iowa, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 4960
This section sums up the dimension and tires information of the tractor.
| Rack-and-pinion rear axle |
| Wheelbase | 118.5 inches (2WD) [300 cm] |
|---|---|
| Front axle | 2WD |
| Height | 118.8 inches [301 cm] |
| 117.1 inches (4WD) [297 cm] | |
| Rear tread | 60 to 134 inches [152 to 340 cm] |
| Front axle | Caster/Action MFWD |
| Width | 118.5 inches [300 cm] |
No data available
Engine Specifications of John Deere, 4960
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled inline valve-in-head |
| Turbocharged aftercooled diesel |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 466 ci [7.6 L] |
| Compression | 15.5:1 |
| Bore/Stroke | 4.5625x4.75 inches [116 x 121 mm] |
| Coolant capacity | 32 qts [30.3 L] |
| Oil capacity | 22 qts [20.8 L] |
| Firing order | 1-5-3-6-2-4 |
| Rated RPM | 2200 |
| Air cleaner | Dual dry element |
Transmission Information of John Deere, 4960Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Standard transmission. |
| Transmission | John Deere Power Shift |
|---|---|
| Oil capacity | 79.2 qts [75.0 L] |
| Type | Full power shift |
| Gears | 15 forward and 4 reverse |
Mechanical Specs of John Deere, 4960Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Sound-Gard cab standard. |
| Differential hydraulic wet disc brakes |
| Power steering |
| Final drives | Inboard planetary |
|---|
Power Information of John Deere, 4960Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 |
Hydraulics Specifications of John Deere, 4960
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Pump flow | 30.6 gpm [115.8 lpm] |
| Rear valves | 3 or 4 |
| Capacity | 19.8 gal [74.9 L] |
| Pressure | 2530 psi [174.4 bar] |
Three-Point Hitch of John Deere, 4960
Hitch category and rear/front lift capacity.
| Rear Type | 3/3N |
|---|---|
| 11,773 lbsOptOptional [5340 kg] | |
| Control | Electrohydraulic draft sensing |
| Rear lift | 10,041 lbs [4554 kg] |
Electrical System of John Deere, 4960
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 925 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 120 |
Frequently asked questions
How much horsepower does the John Deere 4960 have?
The John Deere 4960 delivers 222 hp[P] HP.
What years was the John Deere 4960 produced?
The John Deere 4960 was produced in 1992-1994.
What engine does the John Deere 4960 have?
The John Deere 4960 is powered by a Turbocharged aftercooled diesel, 6-cylinder engine.
What transmission does the John Deere 4960 use?
The John Deere 4960 uses a John Deere Power Shift transmission.
Is the John Deere 4960 4WD?
The John Deere 4960 is available in 2WD/4WD.