John Deere 5010
Power
134 hp[P] hp
Production
1963-1965
Engine
6-cylinder
Transmission
Syncro-Range
Weight
12,925 lbs [5862 kg]
Drive
2WD
From the same series:
Introduction
Production Information of John Deere, 5010
The production information of the tractor (5010) includes details about its manufacturing.
| Standard-tread tractor |
| Built in Waterloo, Iowa, USA |
| Manufacturer | John Deere |
|---|---|
| Original price | $11,000 (1965) |
| Total built | 7,553 |
Dimension and Tires Information of John Deere, 5010
This section sums up the dimension and tires information of the tractor.
| Operating weight | 12,925 lbs [5862 kg] |
|---|---|
| Wheelbase | 104 inches [264 cm] |
| Height (exhaust) | 96.25 inches [244 cm] |
| Height (steering wheel) | 81.5 inches [207 cm] |
| Length | 172.25 inches [437 cm] |
| Ground clearance | 16 inches [40 cm] |
| Shipping weight | 12,270 lbs [5565 kg] |
| Width | 95.75 inches [243 cm] |
| Ag front | 11.00-16 |
|---|---|
| Ag rear | 18.4-34 |
| Ag rear | 24.5-32 |
| Ag front | 7.50-20 |
Engine Specifications of John Deere, 5010
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 6-cylinder |
| Coolant capacity | 34 qts [32.2 L] |
|---|---|
| Displacement | 531 ci [8.7 L] |
| Oil capacity | 12 qts [11.4 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.75x5.00 inches [121 x 127 mm] |
| Exhaust valve clearance | 0.022 inches [0.559 mm] |
| Intake valve clearance | 0.015 inches [0.381 mm] |
| Starter volts | 24 |
| Firing order | 1-5-3-6-2-4 |
| Compression | 16:1 |
Transmission Information of John Deere, 5010Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four shift stations, each with two forward gears and a reverse (except fourth station). Tractor must be stopped and clutch used to select shift station. Tractor can be shifted between gears in the station on the move while using the clutch. |
| Transmission | Syncro-Range |
|---|---|
| 303 Special | |
| Oil type | 303 Special |
| Gears | 8 forward and 3 reverse |
| Oil capacity | 68 qts [64.4 L] |
Mechanical Specs of John Deere, 5010Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of John Deere, 5010Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 |
Hydraulics Specifications of John Deere, 5010
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Pump flow | 20 gpm [75.7 lpm] |
| Valves | 1 or 2 |
| Capacity | 17 gal [64.3 L] |
| Pressure | 2250 psi [155.1 bar] |
Three-Point Hitch of John Deere, 5010
Hitch category and rear/front lift capacity.
| Rear Type | 3/2 |
|---|
Electrical System of John Deere, 5010
Battery voltage, charging system and ground.
| Charging system | Delco-Remy or Prestolite generator |
|---|---|
| Battery AH | 115 |
| Batteries | 4 |
| Battery volts | 6 |
Frequently asked questions
How much horsepower does the John Deere 5010 have?
The John Deere 5010 delivers 134 hp[P] HP.
What years was the John Deere 5010 produced?
The John Deere 5010 was produced in 1963-1965.
What engine does the John Deere 5010 have?
The John Deere 5010 is powered by a 6-cylinder engine.
What transmission does the John Deere 5010 use?
The John Deere 5010 uses a Syncro-Range transmission.
How much does the John Deere 5010 weigh?
The John Deere 5010 weighs 12,925 lbs [5862 kg].
Is the John Deere 5010 4WD?
The John Deere 5010 is available in 2WD.