Introduction
John Deere 5075E Utility Tractor
The John Deere 5075E is a utility tractor introduced in 2008 and manufactured in Pune, India. Part of the 5E series, this model is designed for general agricultural duties, offering a rated power of 75 horsepower (55.9 kW).
Engine and Performance
The tractor is powered by a 2.9-liter, three-cylinder liquid-cooled engine. It provides a maximum torque of 195.5 lb-ft (265.1 Nm) at 1700 RPM. The engine operates at a rated speed of 2400 RPM, with a recommended operating range between 1800 and 2400 RPM. Routine maintenance requirements include an oil capacity of 9 quarts with service intervals at 100 hours.
Transmission and Drivetrain
The 5075E is available with two primary transmission systems: the SyncReverser, standard on 2WD models, and the SyncShuttle, standard on 4WD models. Both configurations provide 9 forward and 3 reverse speeds. The system features a dry disc clutch and allows for shuttle shifting between the second gear and reverse across all ranges.
Hydraulics and Hitch
The open-center hydraulic system features a pump flow of 11.4 gpm (43.1 lpm), with a total system flow reaching 18.2 gpm (68.9 lpm). The rear hitch is a Category 2 type equipped with position and top-link draft control, capable of lifting up to 3,192 lbs (1447 kg) at 24 inches behind the lift points.
Operator Environment and Dimensions
The tractor is built on an 80.7-inch (204 cm) wheelbase with an overall length of 137.8 inches (350 cm). It features hydrostatic power steering and hydraulic wet disc brakes. The operator station is equipped with a folding 2-post Roll-Over Protective Structure (ROPS), with optional canopy configurations available.
Conclusion
The John Deere 5075E serves as a versatile utility tractor suited for a variety of farming applications. Its combination of manual transmission options, standard hydraulic capacity, and compact dimensions makes it a functional choice for operations requiring a reliable 75-horsepower machine.
Production Information of John Deere, 5075E
- Utility tractor
- Built in Pune, Maharashtra, India
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 5075E
| Flange axle rear axle | 57.5 inch length [1460 mm] |
|---|---|
| Wheelbase | 80.7 inches [204 cm] |
| 4WD Clearance (front axle) | 13.4 inches [34 cm] |
| 2WD Clearance (front axle) | 18.8 inches [47 cm] |
| Length | 137.8 inches [350 cm] |
| Front tread | 56 to 80 inches [142 to 203 cm] |
| Front axle | Flange axle: 64.6 inch length [1640 mm] |
| Width | 57.3 inches (axle flange) [145 cm] |
| Rear tread | 55.8 to 71.7 inches [141 to 182 cm] |
| Standard tires (ag) | Front: 7.50-16. Rear: 16.9-28 (2WD) |
|---|---|
| Lawn/turf rear | 21.5L-16.1 |
| Lawn/turf rear(optional) | 9.5-16 (4WD) |
| Lawn/turf rear(optional) | Front: 9.5-24. Rear: 16.9-28 (4WD) |
| Industrial rear | 16.9-24 |
| Industrial front | 11L-15 (2WD) |
| Lawn/turf front | 27/12LL-15 (2WD) |
Engine Specifications of John Deere, 5075E
- Liquid-cooled
| Torque RPM | 1700 |
|---|---|
| Torque | 195.5 lb-ft [265.1 Nm] |
| Intake valve clearance | 0.014 inches [0.356 mm] |
| Air cleaner | Two paper elements |
| Firing order | 1-2-3 |
| Exhaust valve clearance | 0.018 inches [0.457 mm] |
| Exhaust valve clearance(optional) | Heavy-duty air pre-heater (optional) |
| Compression | 17.8:1 |
| Pre-heating | Coolant heater (optional) |
| Displacement | 179 ci [2.9 L] |
| Rated Power (gross) | 75 hp [55.9 kW] |
| Oil capacity | 9 qts [8.5 L] |
| Oil change | 100 h |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Operating RPM | 1800-2400 |
| Starter volts | 12 |
| Coolant capacity | 10 qts [9.5 L] |
| Idle RPM | 800-2600 |
| Rated RPM | 2400 |
Transmission Information of John Deere, 5075E
Transmission variants 1
- Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shuttle shift between 2 and R in all ranges. Other shifts are not synchronized. The SyncReverser is standard equipment on two-wheel drive models.
| Transmission | SyncReverser |
|---|---|
| Oil type | JD Hy-Gard |
| Oil capacity | 40.15 qts [38.0 L] |
| Gears | 9 forward and 3 reverse |
| Gears(optional) | JD Hy-Gard |
| Clutch | Dry disc |
Transmission variants 2
- Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shuttle shift between 2 and R in all ranges. Forward gear shifts in-range are synchronized. Shifts between ranges are not synchronized. The SyncShuttle is standard equipment on four-wheel drive models.
| Transmission | SyncShuttle |
|---|---|
| Oil capacity | 41.2 qts [39.0 L] |
| Clutch | Dry disc |
| Type | Partially synchronized |
| Oil type | JD Hy-Gard |
| Gears | 9 forward and 3 reverse |
- 9-speed
- 9-speed partially synchronized
Mechanical Specs of John Deere, 5075E
- Two- or four-wheel drive
- Hydraulic wet disc brakes
- Folding 2-post ROPS. Optional canopy. Optional deluxe canopy with lights and insulation.
| Steering | Hydrostatic power |
|---|---|
| Final drives | Planetary |
| Differential lock | Rear diff lock standard |
Power Information of John Deere, 5075E
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@2400 |
| Clutch | Mechanical |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 5075E
| Pump flow | 11.4 gpm [43.1 lpm] |
|---|---|
| Type | Open center |
| Rear valves | 1 or 2 |
| Pressure | 2828 psi [195.0 bar] |
| 2WD Capacity | 10 gal [37.9 L] |
| Total flow | 18.2 gpm [68.9 lpm] |
| Mid valves | 2 (optional) |
| 4WD Capacity | 10.3 gal [39.0 L] |
| Steering press. | 1958 psi [135.0 bar] |
| Steering flow | 6.8 gpm [25.7 lpm] |
Three-Point Hitch of John Deere, 5075E
| Rear Type | 2 |
|---|---|
| Drawbar | Adjustable drawbar |
| Control | Position and top-link draft control |
| Rear lift (at 24"/610mm) | 3,192 lbs [1447 kg] |
Electrical System of John Deere, 5075E
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 623 |
| Charging system | Altenrator |
| Charging amps | 40 |
Where it sits
With 75 HP, the John Deere 5075E sits between 5065E (65 HP) and 5083E (83 HP) in John Deere's range. Its power puts it in the 50th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the John Deere 5075E have?
The John Deere 5075E delivers 75 HP.
What years was the John Deere 5075E produced?
The John Deere 5075E was produced in 2008+.
What transmission does the John Deere 5075E use?
The John Deere 5075E uses a SyncReverser transmission.
Is the John Deere 5075E 4WD?
The John Deere 5075E is available in 2WD/4WD.