
John Deere 6125M
Power
125 hp
Production
2013-2015
Engine
Variable geometry turbocharger with intercooler diesel, 4-cylinder
Transmission
SyncroPlus
Weight
11519 lbs [5225 kg]
Drive
2WD/4WD
From the same series:
Introduction
John Deere 6125M Utility Tractor
The John Deere 6125M is a utility tractor produced in Mannheim, Germany, between 2013 and 2015. Part of the 6M series, this model is designed to provide versatile performance for general agricultural operations.
Engine and Performance
The tractor is equipped with a 4.5-liter, 4-cylinder John Deere PowerTech PVX engine. It utilizes a high-pressure common rail fuel system and a variable geometry turbocharger with an intercooler to reach a maximum gross power of 130 hp (96.9 kW). The engine is liquid-cooled and complies with Interim Tier IV emission standards using cooled exhaust gas recirculation.
Transmission Options
Multiple transmission configurations are available to suit various operational requirements, all utilizing a wet disc clutch. These include the 12-speed fully synchronized SyncroPlus, the 16-speed partial power shift PowrQuad, and the 24-speed partial power shift PowrQuad Plus or AutoQuad Plus systems.
Hydraulics and PTO
The hydraulic system features an open-center, pressure-compensated pump providing a flow rate of 21.1 gpm (79.9 lpm), with an optional 30 gpm (113.6 lpm) upgrade. The rear hitch is electro-hydraulically controlled, supporting Category II implements. The independent rear PTO offers 540 and 1000 rpm speeds at an engine speed of 1932 rpm.
Mechanical and Dimensions
The 6125M is built on a chassis that supports both two-wheel and four-wheel drive configurations. It features hydrostatic power steering and hydraulic wet disc brakes. The wheelbase measures 101.6 inches, with an operating weight of 11,519 lbs, capable of reaching a maximum weight of 18,180 lbs.
Conclusion
The John Deere 6125M serves as a capable utility tractor for farmers requiring a balance of power and maneuverability. Its range of transmission and hydraulic options allows for customization depending on the specific demands of the agricultural task.
Production Information of John Deere, 6125M
- Utility tractor
- Built in Mannheim, Baden-Württemberg, Germany
| Manufacturer | John Deere |
|---|---|
| Manufacturer(optional) | $101,397 (2014 AutoQuad Cab 4WD ) |
| Original price | $74,324 (2014 SyncroPlus ROPS 2WD ) |
Dimension and Tires Information of John Deere, 6125M
- Flange rear axle
| Front tread | 60.4 to 80.4 inches [153 to 204 cm (2WD)] |
|---|---|
| Wheelbase | 101.6 inches [258 cm] |
| Clearance (front axle) | 20.47 inches (4WD) [51 cm] |
| Weight | 11519 lbs [5225 kg] |
| Bar rear axle | 3.1 by 100.6 inches [78 by 2555 mm] |
| Max weight | 19180 lbs [8700 kg] |
| Standard tires (ag) | Front: 10.00-16. Rear: 460/85R34 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 380/85R24. Rear: 460/85R34 (4WD) |
Engine Specifications of John Deere, 6125M
- John Deere PowerTech PVX
- Liquid-cooled
- Variable geometry turbocharger with intercooler diesel
- 4-cylinder
| Starter | Electric |
|---|---|
| Torque RPM | 1600 |
| Emission control | Cooled exhaust gas recirculation |
| Starter volts | 12 |
| Maximum Power (gross) | 130 hp [96.9 kW] |
| Fuel system | High pressure common rail |
| Rated Power (gross) | 125 hp [93.2 kW] |
| Displacement | 276 ci [4.5 L] |
| Emissions | Interim Tier IV |
| Bore/Stroke | 4.19x5.00 inches [106 x 127 mm] |
| Torque | 415 lb-ft [562.7 Nm] |
| Oil capacity | 16.9 qts [16.0 L] |
| Coolant capacity | 23.3 qts [22.1 L] |
| Rated RPM | 2100 |
| Compression | 16.1:1 |
Transmission Information of John Deere, 6125M
Transmission variants 1
| Transmission | SyncroPlus |
|---|---|
| Clutch | Wet disc |
| Type | Fully synchronized |
| Gears | 12 forward and 4 reverse |
Transmission variants 2
| Transmission | PowrQuad |
|---|---|
| Oil capacity | 55 qts [52.1 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 16 forward and reverse |
Transmission variants 3
| Transmission | PowrQuad Plus |
|---|---|
| Oil capacity | 55 qts [52.1 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 24 forward and reverse |
Transmission variants 4
| Transmission | AutoQuad Plus |
|---|---|
| Oil capacity | 55 qts [52.1 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 24 forward and reverse |
- 12-speed fully synchronized
- 16-speed partial power shift
- 24-speed partial power shift
Mechanical Specs of John Deere, 6125M
- Two- or four-wheel drive
- Hydraulic wet disc brakes
- Two-post foldable ROPS. Cab optional with air-conditioning. GreenStar (optional); AutoTrac (optional)
| Steering | Hydrostatic power |
|---|---|
| Differential lock | Electro-hydraulic rear |
| Differential lock(optional) | Limit-slip front (4WD) |
Power Information of John Deere, 6125M
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 1000@1932 |
| Rear PTO Type | 540/1000 (1.375) |
| Engine RPM | 540@1932 |
Hydraulics Specifications of John Deere, 6125M
| Pump flow | 21.1 gpm [79.9 lpm] |
|---|---|
| Type | Open center pressure compensated |
| Rear valves | 1 to 3 |
| Pressure | 2900 psi [200.0 bar] |
| Pressure(optional) | Closed center load sensing pressure and flow compensated (optional) |
| Pressure(optional) | 30 gpm (optional) [113.6 lpm] |
| Mid valves | 2 or 3 (optional) |
| Capacity | 13.7 gal [51.9 L] |
| SCV flow | 21.1 gpm [79.9 lpm] |
Three-Point Hitch of John Deere, 6125M
| Rear Type | II/IIIN |
|---|---|
| Drawbar | Cat. II |
| Drawbar(optional) | 6247 lbs (optional) [2833 kg] |
| Control | Electrohydraulic load sensing |
| Rear lift (at 24"/610mm) | 5154 lbs [2337 kg] |
Electrical System of John Deere, 6125M
| Ground | Negative |
|---|---|
| Charging volts | 14 |
| Charging volts(optional) | 150 (optional) |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 90 |
Where it sits
With 125 HP, the John Deere 6125M sits between 6115M (115 HP) and 6130M (130 HP) in John Deere's range. Its power puts it in the 71th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the John Deere 6125M have?
The John Deere 6125M delivers 125 HP.
What years was the John Deere 6125M produced?
The John Deere 6125M was produced in 2013-2015.
What engine does the John Deere 6125M have?
The John Deere 6125M is powered by a Variable geometry turbocharger with intercooler diesel, 4-cylinder engine.
What transmission does the John Deere 6125M use?
The John Deere 6125M uses a SyncroPlus transmission.
How much does the John Deere 6125M weigh?
The John Deere 6125M weighs 11519 lbs [5225 kg].
Is the John Deere 6125M 4WD?
The John Deere 6125M is available in 2WD/4WD.