John Deere 7130
Power
121 hp
Production
2007-2011
Engine
Turbocharged diesel, The Deere 7130 switched to a four-cylinder engine with the 2010 model year.
Transmission
John Deere SyncroPlus
Drive
2WD/4WD
From the same series:
Introduction
John Deere 7130 Row-Crop Tractor
The John Deere 7130 is a row-crop tractor produced between 2007 and 2011 in Mannheim, Germany. As part of the 7030 series, this model offers various configurations to suit diverse agricultural tasks, featuring a four-cylinder engine and multiple transmission options.
Engine and Performance
The tractor is powered by a 4.5-liter John Deere PowerTech E 4045HL288, a turbocharged, liquid-cooled, four-cylinder diesel engine. It produces a rated gross power of 125 hp (93.2 kW) and generates 372 lb-ft (504.4 Nm) of torque at 1600 RPM. The fuel system utilizes high-pressure common rail technology to optimize combustion efficiency.
Transmission and Drivetrain
Several transmission configurations were available, ranging from the 12-speed SyncroPlus to the 24-speed PowrQuad partial power shift. These systems allow for precise speed control in the field. The tractor is available in a 2WD configuration with an optional 4WD MFWD system, providing necessary traction for varying soil conditions.
Hydraulics and Hitch
Equipped with a constant flow load-sensing hydraulic system, the 7130 provides a pump flow of 21.1 gpm (79.9 lpm) at 2900 psi. It features a Category II rear hitch with electronic position control, capable of lifting up to 5,915 lbs (2683 kg) at 24 inches behind the lift point.
Dimensions and Operator Station
The tractor is built on a 106.3-inch wheelbase. Operators can choose between an open-station design with a two-post Roll-Gard ROPS or an optional cab for improved comfort. Steering is facilitated by a hydrostatic power system, and braking is managed through differential hydraulic wet disc brakes.
Conclusion
The John Deere 7130 serves as a versatile mid-range tractor suitable for row-crop operations. Its range of transmission and hydraulic options allows it to be configured for various farm management needs, emphasizing reliability and structural durability.
Production Information of John Deere, 7130
- The basic Deere 7130 was available a basic cab or open-operator station with ROPS. Upgraded hydraulics and hitch were optional on open-operator station models. Upgraded systems with a cab were only available on the 7130 Premium.
- Row-Crop tractor
- Built in Mannheim, Baden-Württemberg, Germany
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 7130
| Front tread | 59.5 to 85.5 inches [151 to 217 cm (2WD)] |
|---|---|
| Wheelbase | 106.3 inches (2WD) [270 cm] |
| Clearance (front axle) | 21.6 inches (2WD) [54 cm] |
| Width | 65.5 inches (flange axle ends) [166 cm] |
| Width(optional) | 104.3 inches [264 cm] |
| Clearance (drawbar) | 19 inches [48 cm] |
| Clearance (drawbar)(optional) | 23 inches (4WD) [58 cm] |
| Length | 187.3 inches [475 cm] |
| Rear tread | 63.5 to 72.5 inches [161 to 184 cm] |
| Front tread | 59.4 to 88 inches [150 to 223 cm (4WD)] |
| Rear axle | 3.1 by 100.6 inches [78 by 2555 mm (optional bar)] |
| Rear axle | 65.5 inch length [1663 mm (flange)] |
| Clearance (rear axle) | 28.2 inches [71 cm] |
| Standard tires (ag) | Front: 10.00-16. Rear: 18.4R38 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 14.9R24. Rear: 18.4R38 (4WD) |
Engine Specifications of John Deere, 7130
- John Deere PowerTech E 4045HL288
- Liquid-cooled
- The Deere 7130 switched to a four-cylinder engine with the 2010 model year.
- Turbocharged diesel
- 4-cylinder 8-valve
| Torque | 372 lb-ft [504.4 Nm] |
|---|---|
| Intake valve clearance | 0.014 inches [0.356 mm] |
| Operating RPM | 1600-2300 |
| Starter power | 4 hp [3.0 kW] |
| Emissions | Tier III |
| Torque RPM | 1600 |
| Oil capacity | 16.8 qts [15.9 L] |
| Fuel system | High-pressure common rail |
| Rated Power (gross) | 125 hp [93.2 kW] |
| Air cleaner | Dual paper elements |
| Exhaust valve clearance | 0.018 inches [0.457 mm] |
| Bore/Stroke | 4.19x5.00 inches [106 x 127 mm] |
| Displacement | 276 ci [4.5 L] |
| Idle RPM | 850-2460 |
| Firing order | 1-3-4-2 |
| Starter volts | 12 |
| Rated RPM | 2300 |
| Compression | 19:1 |
Transmission Information of John Deere, 7130
Transmission variants 1
- Four ranges, each with four forward gears and reverse operated via a range shift lever and gear shift lever. Cluch must be used to change range or gear. Only avaialable with ROPS.
| Transmission | John Deere SyncroPlus |
|---|---|
| Oil capacity | 54.8 qts [51.9 L] |
| Type | Full synchro shift |
| Gears | 12 forward and 4 reverse |
Transmission variants 2
- Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range or gear.
| Transmission | John Deere SyncroPlus PowrReverser |
|---|---|
| Oil capacity | 54.8 qts [51.9 L] |
| Type | Full synchro shift |
| Gears | 16 forward and reverse |
Transmission variants 3
- Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.
| Transmission | John Deere PowrQuad |
|---|---|
| Oil capacity | 54.8 qts [51.9 L] |
| Type | Partial power shift |
| Gears | 16 forward and reverse |
Transmission variants 4
- Six ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.
| Transmission | John Deere PowrQuad |
|---|---|
| Oil capacity | 54.8 qts [51.9 L] |
| Type | Partial power shift |
| Gears | 24 forward and reverse |
- 12-speed full synchro shift
- 24-speed partial power shift
- 16-speed full synchro shift
- 16-speed partial power shift
Mechanical Specs of John Deere, 7130
- Two-post Roll-Gard ROPS. Cab optional.
- Differential hydraulic wet disc brakes
| Drive | 4x2 2WD |
|---|---|
| Drive(optional) | 4x4 MFWD 4WD (optional) |
| Steering | Hydrostatic power |
Power Information of John Deere, 7130
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of John Deere, 7130
| Pump flow | 21.1 gpm [79.9 lpm] |
|---|---|
| Type | Constant flow load sensing |
| Pressure | 2900 psi [200.0 bar] |
| Pressure(optional) | 15.9 gal [60.2 L] |
| Pressure(optional) | Closed-center load sensing (optional with ROPS) |
| Pressure(optional) | 29 gpm (optional with ROPS) [109.8 lpm] |
| Valves | 1 to 4 |
| Capacity | 13.7 gal [51.9 L] |
Three-Point Hitch of John Deere, 7130
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 5,915 lbs [2683 kg] |
| Control | Position control |
| Control(optional) | Electronic lower-link (optional with ROPS) |
Electrical System of John Deere, 7130
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 90 |
Where it sits
With 121 HP, the John Deere 7130 sits just below 7230 (135 HP) in John Deere's range. Its power puts it in the 73th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the John Deere 7130 have?
The John Deere 7130 delivers 121 HP.
What years was the John Deere 7130 produced?
The John Deere 7130 was produced in 2007-2011.
What engine does the John Deere 7130 have?
The John Deere 7130 is powered by a Turbocharged diesel, The Deere 7130 switched to a four-cylinder engine with the 2010 model year. engine.
What transmission does the John Deere 7130 use?
The John Deere 7130 uses a John Deere SyncroPlus transmission.
Is the John Deere 7130 4WD?
The John Deere 7130 is available in 2WD/4WD.