John Deere 7710
Power
155 hp
Production
1997-2003
Engine
6-cylinder
Transmission
John Deere PowrQuad
Drive
2WD/4WD
From the same series:
Introduction
Production Information of John Deere, 7710
The production information of the tractor (7710) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Waterloo, Iowa, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 7710
This section sums up the dimension and tires information of the tractor.
| Rear tread | 60 to 108.3 inches [152 to 275 cm (3.0m axle)] |
|---|---|
| 2WD Wheelbase | 114.4 inches [290 cm] |
| Height | 117 inches [297 cm] |
| Width | 110 inches [279 cm] |
| 4WD Wheelbase | 110.2 inches [279 cm] |
| Rear axle | 3.62 by 118.6 inches [91 by 3012 mm] |
| Rear axle | 3.62 by 96 inches [91 by 2438 mm] |
| Length | 173 inches [439 cm] |
| Rear tread | 60 to 100.3 inches [152 to 254 cm (2.8m axle)] |
| Rear tread | 60 to 85.7 inches [152 to 217 cm (2.5m axle)] |
| Rear axle | 3.62 by 110.5 inches [91 by 2806 mm] |
| 2WD Standard tires (ag) | Front: 11.00-16. Rear: 18.4-38 |
|---|---|
| 4WD Standard tires (ag) | Front: 14.9-28. Rear: 18.4-38 |
Engine Specifications of John Deere, 7710
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 6-cylinder |
| Fuel system | Direct injection |
|---|---|
| Rated RPM | 2100 |
| Oil capacity | 25 qts [23.7 L] |
| Displacement | 496 ci [8.1 L] |
| Bore/Stroke | 4.56x5.06 inches [116 x 129 mm] |
| Power | 155 hp [115.6 kW] |
| Compression | 16.5:1 |
| Air cleaner | Dual dry element |
| Coolant capacity | 27.5 qts [26.0 L] |
| Starter volts | 12 |
| Torque | 522 lb-ft [707.8 Nm] |
Transmission Information of John Deere, 7710Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four speeds (1-4) in four ranges (A-D) with reverser lever. Speeds (1-4) and forward-reverse shuttle are power shifts. Ranges are synchronized, and may be shifting on the move by using the clutch. Also available as 20-speed with five ranges. |
| Transmission | John Deere PowrQuad |
|---|---|
| 103.6 qts (4WD) [98.0 L] | |
| Oil capacity | 91.6 qts (2WD) [86.7 L] |
| Type | Partial power shift |
| Gears | 16 forward and reverse |
Transmission variants 2
| The power shift transmission is operated with a single right-hand shift lever. Transmission can be directly shifted up to gear 11 forward and 7 reverse. |
| Transmission | John Deere PowerShift |
|---|---|
| 108 qts (4WD) [102.2 L] | |
| Oil capacity | 96 qts (2WD) [90.9 L] |
| Type | Full power shift |
| Gears | 19 forward and 7 reverse |
Transmission variants 3
| The AutoPowr IVT became available in 2002. |
| Transmission | AutoPowr |
|---|---|
| Type | Infinitely Variable Transmission (IVT) |
| Gears | Infinite forward and reverse |
Transmission variants 4
| Four speeds (1-4) in five ranges (A-E) with reverser lever. Speeds (1-4) and forward-reverse shuttle are power shifts. Ranges are synchronized, and may be shifting on the move by using the clutch. AutoQuad uses push-button gear shifting on the range shift lever. Auto mode allows for automatic gear shifting to match load. |
| Transmission | John Deere AutoQuad |
|---|---|
| 103.6 qts (4WD) [98.0 L] | |
| Oil capacity | 91.6 qts (2WD) [86.7 L] |
| Type | Partial power shift |
| Gears | 20 forward and reverse |
| 16-speed partial power shift |
| 20-speed partial power shift |
| 19-speed full power shift |
| Infinitely Variable Transmission (IVT) |
Mechanical Specs of John Deere, 7710Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Electro-hydraulic |
Power Information of John Deere, 7710Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2100 | |
| Engine RPM | 540@2100 |
| Clutch | Hydraulic wet discs |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of John Deere, 7710
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center pressure flow compensated (PFC) |
|---|---|
| SCV flow | 26 gpm [98.4 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| Valves | 2 to 5 |
Three-Point Hitch of John Deere, 7710
Hitch category and rear/front lift capacity.
| Rear Type | IIIN/II |
|---|---|
| Front lift | 7700 lbs [3492 kg] |
| Front Hitch | IIIN/II OptOptional |
| Rear lift | 8925 lbs [4048 kg] |
| 10050 lbsOptOptional [4558 kg] |
Electrical System of John Deere, 7710
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 925 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 140 |
Frequently asked questions
How much horsepower does the John Deere 7710 have?
The John Deere 7710 delivers 155 HP.
What years was the John Deere 7710 produced?
The John Deere 7710 was produced in 1997-2003.
What engine does the John Deere 7710 have?
The John Deere 7710 is powered by a 6-cylinder engine.
What transmission does the John Deere 7710 use?
The John Deere 7710 uses a John Deere PowrQuad transmission.
Is the John Deere 7710 4WD?
The John Deere 7710 is available in 2WD/4WD.