John Deere 8200 tractor

John Deere 8200

Power

200 hp[P] hp

Production

1995-1999

Engine

Turbocharged diesel, 6-cylinder

Transmission

John Deere PowerShift

Drive

2WD/4WD

From the same series:

8100
8300

Introduction

Production Information of John Deere, 8200

The production information of the tractor (8200) includes details about its manufacturing.

Row-Crop tractor
Built in Waterloo, Iowa, USA
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 8200

This section sums up the dimension and tires information of the tractor.

4WD Front tread60 to 88 inches [152 to 223 cm]
2WD Wheelbase122.8 inches [311 cm]
4WD Ground clearance23.2 inches [58 cm]
Height120.2 inches [305 cm]
4WD Wheelbase116.1 inches [294 cm]
Standard axle rear axle3.937 by 118.5 inches [99 by 3009 mm]
2WD Ground clearance31.5 inches [80 cm]
Length206.5 inches [524 cm]
2WD Front tread60 to 84 inches [152 to 213 cm]
Optional large axle rear axle4.331 by 118.5 inches [110 by 3009 mm]
Optional short axle rear axle3.937 by 110.5 inches [99 by 2806 mm]
2WD Standard tires (ag)Front: 11.00-24. Rear: 18.4R46
Front: 14.9R34. Rear: 18.4R46

Engine Specifications of John Deere, 8200

Get the specifications for the engine and if different options are available.

John Deere
Liquid-cooled
Turbocharged diesel
6-cylinder
Oil capacity24.8 qts [23.5 L]
Displacement466 ci [7.6 L]
Rated RPM2200
Bore/Stroke4.5625x4.75 inches [116 x 121 mm]
Coolant capacity28.8 qts [27.3 L]
Starter volts12
Firing order1-5-3-6-2-4
Compression15.1:1

Transmission Information of John Deere, 8200Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

TransmissionJohn Deere PowerShift
Oil capacity148 qts [140.1 L]
ClutchHydraulic wet disc
TypeFull power shift
Gears16 forward and 4 reverse

Mechanical Specs of John Deere, 8200Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Differential hydraulic wet disc brakes
Power steering
CommandView Cab standard. Row-Trak guidance optional.
Final drivesInboard planetary
Differential lockElectro-hydraulic

Power Information of John Deere, 8200Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

1000@2200
Rear PTOIndependent
540 (1.375)OptOptional
1000 (1.375)OptOptional
ClutchHydraulic wet disc
Engine RPM540@1930
Rear PTO Type1000 (1.75)

Hydraulics Specifications of John Deere, 8200

Hydraulic system type, pressure, pump flow and valves.

TypeClosed center pressure-flow compensated (PFC)
SCV flow30 gpm [113.6 lpm]
Valves3 to 5
Capacity37 gal [140.0 L]
Pressure2900 psi [200.0 bar]

Three-Point Hitch of John Deere, 8200

Hitch category and rear/front lift capacity.

Rear TypeIII/IIIN
14165 lbsOptOptional [6425 kg]
ControlElectro-hydraulic draft sensing
Rear lift10400 lbs [4717 kg]

Electrical System of John Deere, 8200

Battery voltage, charging system and ground.

GroundNegative
Battery CCA1,850
Batteries2
Charging systemAlternator
Battery volts12
Charging amps140

Frequently asked questions

How much horsepower does the John Deere 8200 have?

The John Deere 8200 delivers 200 hp[P] HP.

What years was the John Deere 8200 produced?

The John Deere 8200 was produced in 1995-1999.

What engine does the John Deere 8200 have?

The John Deere 8200 is powered by a Turbocharged diesel, 6-cylinder engine.

What transmission does the John Deere 8200 use?

The John Deere 8200 uses a John Deere PowerShift transmission.

Is the John Deere 8200 4WD?

The John Deere 8200 is available in 2WD/4WD.

Compare the John Deere 8200 with another model