John Deere 8260R

Name: John Deere 8260R
Brand: John Deere

Power

260 hp

Production

2011-2013

Engine

Dual turbochargers diesel, 6-cylinder 24-valve

Transmission

John Deere Automatic PowerShift

Drive

4WD

Over 200 HP 2010s

From the same series:

8235R

8285R

Introduction

John Deere 8260R Row-Crop Tractor

The John Deere 8260R is a high-horsepower row-crop tractor manufactured in Waterloo, Iowa, between 2011 and 2013. This machine belongs to the 8R series and is designed for heavy-duty agricultural field operations.

Engine and Power

The tractor is powered by a 9.0L (548 ci) John Deere PowerTech PSX engine. This 6-cylinder, 24-valve, liquid-cooled unit features dual turbochargers and meets Interim Tier IV emission standards using exhaust gas recirculation. It produces a rated gross power of 260 hp at 2100 RPM. An optional Intelligent Power Management (IPM) system is available to provide an additional 35 hp during specific applications, bringing the maximum power to 306 hp.

Transmission and Drivetrain

The 8260R is equipped with a four-wheel drive system and offers two transmission configurations. The Automatic PowerShift transmission provides 16 forward and 4 reverse gears, utilizing computer control to adjust shifting based on load. Alternatively, the AutoPowr Infinitely Variable Transmission (IVT) is available, offering seamless speed control for both forward and reverse operations.

Hydraulics and Hitch

The hydraulic system utilizes a closed-center, pressure-flow compensated design. It provides a standard pump flow of 35 gpm, with a total system flow of 44 gpm, and an optional 60 gpm configuration. The tractor supports 3 to 5 rear valves. The rear three-point hitch (Category 3/3N or 4N/3) features a maximum lift capacity reaching up to 18,700 lbs, depending on the specific model year and configuration.

Operator Environment and Mechanicals

The CommandView II cab is standard, providing heating and air conditioning to maintain operator comfort. Steering is handled by a hydrostatic power system, with the optional ActiveCommand Steering (ACS) available for improved handling. Braking is managed by hydraulic wet disc brakes, and the chassis supports various front axle configurations, including MFWD 1300 or 1500/ILS axles with differential locks.

Conclusion

"The John Deere 8260R is a robust row-crop tractor engineered for high-efficiency farming. Its combination of high-capacity hydraulics, multiple transmission options, and substantial lift capabilities makes it well-suited for heavy tillage, planting, and material handling tasks in professional agricultural settings."

Introduction

Production Information of John Deere, 8260R

The production information of the tractor (8260R) includes details about its manufacturing.

For the 2012 model year the three-point hitch lift capacity was increased by several hundred pounds on the John Deere 8260R

Row-Crop tractor

Built in Waterloo, Iowa, USA


Manufacturer	John Deere
Original price	$197,133 (2011)

Dimension and Tires Information of John Deere, 8260R

This section sums up the dimension and tires information of the tractor.


Wheelbase	120.1 inches (1300 MFWD) [305 cm]
	258.3 inches (with front weights) [656 cm]
	175.1 inches (extra-long lamps) [444 cm]
Length	243.9 inches [619 cm]
	23.5 inches (1500) [59 cm]
	118.9 inches (1500/ILS) [302 cm]
Width	96 inches (axle) [243 cm]
	118.5 inches (long axle) [300 cm]
	137.3 inches (clearance lamps) [348 cm]
Clearance (front axle)	24.3 inches (1300) [61 cm]
Height (cab)	138.9 inches [352 cm]
Clearance (drawbar)	12.6 inches [32 cm]
Clearance (rear axle)	24.9 inches [63 cm]
	20.1 inches (ILS) [51 cm]


Ag front	420/90R30
Ag rear	480/80R46

Engine Specifications of John Deere, 8260R

Get the specifications for the engine and if different options are available.

John Deere PowerTech PSX

Liquid-cooled inline

Optional Intelligent Power Management (IPM) provides a 35HP increase at rated speed.

Dual turbochargers diesel

6-cylinder 24-valve


	Block heater (optional)
	29.5 qts (1500/ILS axle) [27.9 L]
Pre-heating	Ether (optional)
Starter volts	12
Emissions	Interim Tier IV
Compression	16:1
Oil capacity	26.4 qts (1300 axle) [25.0 L]
Coolant capacity	43.3 qts [41.0 L]
Emission control	Exhaust gas recirculation (EGR)
	Stage IIIB
Rated Power (gross)	260 hp [193.9 kW]
Oil change	250 h
Bore/Stroke	4.66x5.35 inches [118 x 136 mm]
Displacement	548 ci [9.0 L]
Air cleaner	Dual stage
Rated RPM	2100
	500 h (JD Plus-50 II oil)
Starter	Electric
	306 hp (IPM) [228.2 kW]
Maximum Power (gross)	286 hp [213.3 kW]

Transmission Information of John Deere, 8260RY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Automatic PowerShift uses computer control to shift based on load up to the highest selected gear. Fifth reverse is optional through dealer re-programming.


Transmission	John Deere Automatic PowerShift
Type	Full power shift
Gears	16 forward and 4 reverse

Transmission variants 2

IVT available with right- or left-hand reverser.


Transmission	John Deere AutoPowr
Type	Infinitely variable transmission (IVT)
Gears	Infinite forward and reverse

16-speed full power shift

Infinitely variable transmission (IVT)

Mechanical Specs of John Deere, 8260RY

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive

CommandView II cab standard with heat and air-conditioning.

Differential hydraulic wet disc brakes


Trailer brakes	Hydraulic and air optional
	ActiveCommand Steering optional (ACS)
Steering	Hydrostatic power
Differential lock	Hydraulic rear lock
	Front lock on 1500 and ILS front axles

Power Information of John Deere, 8260RY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.


Rear PTO	Independent
	540 (1-3/8 optional)
Rear PTO Type	1000 (1-3/4)
	1000 (1-3/8 optional)

Hydraulics Specifications of John Deere, 8260R

Hydraulic system type, pressure, pump flow and valves.


Type	Closed center pressure-flow compensated
Total flow	44 gpm [166.5 lpm]
Pump flow	35 gpm [132.5 lpm]
Pressure	2900 psi [200.0 bar]
	60 gpm (optional) [227.1 lpm]
Rear valves	3 to 5

Three-Point Hitch of John Deere, 8260R

Hitch category and rear/front lift capacity.


	11,450 lbs [5193 kg]
Rear Type	3/3N
	18,300 lbs (4N/3 2011) [8300 kg]
	17,300 lbs (3/3N 2011) [7847 kg]
	4N/3
	18,700 lbs (4N/3 2012) [8482 kg]
	13,600 lbs (3/3N 2012) [6168 kg]
Rear lift (at 24"/610mm)	13,300 lbs (3/3N 2011) [6032 kg]
	12,300 lbs [5579 kg]
Front lift (at ends)	8,800 lbs [3991 kg]
Front Hitch	3N/2 (optional)
	17,600 lbs (3/3N 2012) [7983 kg]

Electrical System of John Deere, 8260R

Battery voltage, charging system and ground.


Ground	Negative
Battery CCA	925
Batteries	2
Charging system	Alternator
Battery volts	12
Charging amps	200

Frequently asked questions

How much horsepower does the John Deere 8260R have?

The John Deere 8260R delivers 260 HP.

What years was the John Deere 8260R produced?

The John Deere 8260R was produced in 2011-2013.

What engine does the John Deere 8260R have?

The John Deere 8260R is powered by a Dual turbochargers diesel, 6-cylinder 24-valve engine.

What transmission does the John Deere 8260R use?

The John Deere 8260R uses a John Deere Automatic PowerShift transmission.

Is the John Deere 8260R 4WD?

The John Deere 8260R is available in 4WD.

More John Deere models

7260R260 HP · 2011 - 2013 9100260 HP · 1997 - 2001 8410261 HP · 1999 - 2002 8410T261 HP · 2000 - 2001 8320263 HP · 2002 - 2005 8320T263 HP · 2002 - 2005 8230T265 HP · 2006 - 2009 6M 230266 HP · 2024 -

View all 824 John Deere models →

Compare the John Deere 8260R with another model

Popular comparisons

vs Massey Ferguson 8470 vs New Holland 9282 vs Fendt Favorit 926 Vario vs Renault Atles 935 vs Renault Atles 936 vs Deutz-Fahr Agrotron 260 MK3