John Deere 9120
Power
280 hp
Production
2002-2007
Engine
6-cylinder
Transmission
John Deere PowerSync
Weight
35,375 lbs (620/70R46 duals) [16046 kg]
Drive
4WD
From the same series:
Introduction
Production Information of John Deere, 9120
The production information of the tractor (9120) includes details about its manufacturing.
| Four-wheel Drive (4WD) tractor |
| Built in Waterloo, Iowa, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 9120
This section sums up the dimension and tires information of the tractor.
| Clearance (front axle) | 26.8 inches [68 cm] |
|---|---|
| Wheelbase | 137.8 inches [350 cm] |
| Shipping weight | 30,970 lbs [14047 kg] |
| Width | 115.5 inches [293 cm] |
| Length | 274 inches [695 cm] |
| Clearance (drawbar) | 15 inches [38 cm] |
| Operating weight | 35,375 lbs (620/70R46 duals) [16046 kg] |
| 289 inches (with hitch) [734 cm] |
| Ag front | 20.8R42 |
|---|---|
| Ag rear | 20.8R42 |
Engine Specifications of John Deere, 9120
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 496 ci [8.1 L] |
| Oil capacity | 28 qts [26.5 L] |
| Air cleaner | Dry |
| Bore/Stroke | 4.56x5.06 inches [116 x 129 mm] |
| Coolant capacity | 55 qts [52.1 L] |
| Rated RPM | 2100 |
| Compression | 16.0:1 |
| Power | 280 hp [208.8 kW] |
Transmission Information of John Deere, 9120Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four ranges (A-D) and three gears (1-3) with high-low power shift. Synchronized shifting between ranges A-B, B-C, and C-D. Gear shifts are synchronized between 1-R, 1-2, and 2-3. Reverse gear does not operate in D range. |
| Transmission | John Deere PowerSync |
|---|---|
| 140 qts (with PTO) [132.5 L] | |
| Oil capacity | 136 qts [128.7 L] |
| Type | Partial power shift |
| Gears | 24 forward and 6 reverse |
Transmission variants 2
| Transmission | John Deere Powershift |
|---|---|
| Type | Full power shift |
| Gears | 18 forward and 6 reverse |
| 24-speed partial power shift |
| 18-speed full power shift |
Mechanical Specs of John Deere, 9120Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| CommandView cab standard with air-conditioning. |
| Hydraulic wet disc brakes |
| Steering | Hydrostatic articulated |
|---|
Power Information of John Deere, 9120Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 |
Hydraulics Specifications of John Deere, 9120
Hydraulic system type, pressure, pump flow and valves.
| Total flow | 44 gpm [166.5 lpm] |
|---|---|
| Type | Closed center pressure/flow compensated |
| Valves | 4 or 5 |
| Pressure | 2900 psi [200.0 bar] |
| Capacity | 27 gal [102.2 L] |
| 48 gpm (Powershift) [181.7 lpm] | |
| Pump flow | 30 gpm [113.6 lpm] |
| 28 gal (with 3pt) [106.0 L] |
Three-Point Hitch of John Deere, 9120
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| 14,445 lbs (optional) [6552 kg] | |
| IV/IVN | |
| Rear lift | 13,871 lbs [6291 kg] |
Electrical System of John Deere, 9120
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 925 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 140 |
Frequently asked questions
How much horsepower does the John Deere 9120 have?
The John Deere 9120 delivers 280 HP.
What years was the John Deere 9120 produced?
The John Deere 9120 was produced in 2002-2007.
What engine does the John Deere 9120 have?
The John Deere 9120 is powered by a 6-cylinder engine.
What transmission does the John Deere 9120 use?
The John Deere 9120 uses a John Deere PowerSync transmission.
How much does the John Deere 9120 weigh?
The John Deere 9120 weighs 35,375 lbs (620/70R46 duals) [16046 kg].
Is the John Deere 9120 4WD?
The John Deere 9120 is available in 4WD.