John Deere 9300
Power
360 hp
Production
1997-2001
Engine
6-cylinder
Transmission
John Deere Syncro
Weight
31,440 lbs [14261 kg]
Drive
4WD
From the same series:
Introduction
John Deere 9300 Four-Wheel Drive Tractor
The John Deere 9300 is a heavy-duty four-wheel drive tractor produced between 1997 and 2001 in Waterloo, Iowa, USA. Designed for large-scale agricultural operations, this machine represents a critical iteration in the manufacturer's high-horsepower series, bridging the gap between earlier models and the subsequent 9020 series.
Engine and Performance
The tractor is powered by a liquid-cooled, 6-cylinder engine with a displacement of 765 cubic inches (12.5 liters). It delivers a rated power output of 360 horsepower (268.5 kW) at 2100 RPM. The engine features a 16:1 compression ratio and is supported by a significant cooling capacity of 60.6 liters and an oil capacity of 41.6 liters, ensuring thermal stability during prolonged high-load field operations.
Transmission Systems
Operators can select from three distinct transmission architectures to suit specific field requirements. The John Deere Syncro offers a 12-forward and 3-reverse speed configuration with partially synchronized shifting. The PowrSync option provides a 24-forward and 6-reverse range with high-low power shift capabilities. For maximum efficiency, the full PowerShift transmission delivers 12 forward and 2 reverse gears, allowing for on-the-go shifting without clutch engagement.
Hydraulics and Hitch
The hydraulic system utilizes a closed-center pressure and flow compensated (PFC) design. It provides a pump flow of 35 gallons per minute (132.5 liters per minute), with a total system flow reaching 44 gallons per minute (166.5 liters per minute) at a pressure of 2900 psi. The rear of the machine is equipped with a Category III hitch capable of lifting 13,871 lbs (6,291 kg), suitable for heavy-duty implements.
Mechanical and Dimensions
Built on a 137.8-inch (350 cm) wheelbase, the 9300 features hydrostatic power steering and hydraulic wet disc brakes for precise handling and stopping performance. The tractor has a shipping weight of 14,261 kg and is configured with dual wheels, resulting in a total width of 169 inches (429 cm). Final drives are managed through inboard planetary systems to handle the high torque output.
Conclusion
The John Deere 9300 is engineered for large-acreage farming, offering the necessary power and hydraulic capacity for demanding primary tillage and traction applications. Its variety of transmission options and robust chassis design make it a versatile choice for operators requiring sustained performance and reliability in heavy-field environments.
Production Information of John Deere, 9300
- Four-wheel Drive (4WD) tractor
- Built in Waterloo, Iowa, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 9300
| Front axle | 3.94 by 120 inches [100 by 3048 mm] |
|---|---|
| Wheelbase | 137.8 inches [350 cm] |
| Shipping weight | 31,440 lbs [14261 kg] |
| Height (cab) | 137.5 inches [349 cm] |
| Length | 274 inches [695 cm] |
| Front axle | 4.31 by 120 inches [109 by 3048 mm] |
| Ground clearance | 28.8 inches (axles) [73 cm] |
| Width | 169 inches (duals) [429 cm] |
| Rear axle | 4.31 by 120 inches [109 by 3048 mm] |
| Rear axle | 3.94 by 120 inches [100 by 3048 mm] |
| Ag front | 620/70R42 |
|---|---|
| Ag rear | 620/70R42 |
Engine Specifications of John Deere, 9300
- Liquid-cooled inline
- 6-cylinder
| Power | 360 hp [268.5 kW] |
|---|---|
| Displacement | 765 ci [12.5 L] |
| Oil capacity | 44 qts [41.6 L] |
| Compression | 16:1 |
| Bore/Stroke | 5.00x6.50 inches [127 x 165 mm] |
| Coolant capacity | 64 qts [60.6 L] |
| Rated RPM | 2100 |
Transmission Information of John Deere, 9300
Transmission variants 1
- Three speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range.
| Transmission | John Deere Syncro |
|---|---|
| Transmission(optional) | 151.6 qts (110mm axle) [143.5 L] |
| Oil capacity | 147.2 qts (100mm axle) [139.3 L] |
| Type | Partially synchronized |
| Type(optional) | 140 qts (SN030001+) [132.5 L] |
| Type(optional) | 151.2 qts (PTO 100mm axle) [143.1 L] |
| Gears | 12 forward and 3 reverse |
Transmission variants 2
- Three speeds (1, 2, 3 and reverse) in four ranges (A-D) plus high-low power shift. Speeds and ranges may be shifted on the move, using the clutch. High-low power shift for each speed using lever.
| Transmission | John Deere PowrSync |
|---|---|
| Transmission(optional) | 151.6 qts (110mm axle) [143.5 L] |
| Oil capacity | 147.2 qts (100mm axle) [139.3 L] |
| Type | Partial power shift |
| Type(optional) | 140 qts (SN030001+) [132.5 L] |
| Type(optional) | 151.2 qts (PTO 100mm axle) [143.1 L] |
| Gears | 24 forward and 6 reverse |
Transmission variants 3
| Transmission | John Deere PowerShift |
|---|---|
| Transmission(optional) | 56 qts (SN030001+) [53.0 L] |
| Oil capacity | 64 qts (early) [60.6 L] |
| Type | Full power shift |
| Type(optional) | 120 qts (axles early) [113.6 L] |
| Type(optional) | 60 qts (no PTO early) [56.8 L] |
| Gears | 12 forward and 2 reverse |
| Gears(optional) | 108 qts (axles SN030001+) [102.2 L] |
- 12-speed partially synchronized
- 24-speed partial power shift
- 12-speed full power shift
Mechanical Specs of John Deere, 9300
- Four-wheel drive
- Cab standard.
- Hydraulic wet disc brakes
| Final drives | Inboard planetary |
|---|---|
| Steering | Hydrostatic power |
Power Information of John Deere, 9300
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (optional) |
Hydraulics Specifications of John Deere, 9300
| Type | Closed center PFC |
|---|---|
| Pump flow | 35 gpm [132.5 lpm] |
| Valves | 3 to 5 |
| Capacity | 26 gal [98.4 L] |
| Total flow | 44 gpm [166.5 lpm] |
| Pressure | 2900 psi [200.0 bar] |
Three-Point Hitch of John Deere, 9300
| Rear Type | III |
|---|---|
| Rear lift | 13,871 lbs [6291 kg] |
Electrical System of John Deere, 9300
| Ground | Negative |
|---|---|
| Battery CCA | 925 |
| Batteries | 3 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 140 |
Where it sits
With 360 HP, the John Deere 9300 sits between 8870 (350 HP) and 9320 (375 HP) in John Deere's range. Its power puts it in the 99th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the John Deere 9300 have?
The John Deere 9300 delivers 360 HP.
What years was the John Deere 9300 produced?
The John Deere 9300 was produced in 1997-2001.
What engine does the John Deere 9300 have?
The John Deere 9300 is powered by a 6-cylinder engine.
What transmission does the John Deere 9300 use?
The John Deere 9300 uses a John Deere Syncro transmission.
How much does the John Deere 9300 weigh?
The John Deere 9300 weighs 31,440 lbs [14261 kg].
Is the John Deere 9300 4WD?
The John Deere 9300 is available in 4WD.