John Deere 9460RT tractor

John Deere 9460RT

Power

460 hp

Production

2012-2014

Engine

Turbocharged diesel, 6-cylinder 24-valve

Transmission

John Deere PowerShift

From the same series:

9510RT

Introduction

Production Information of John Deere, 9460RT

The production information of the tractor (9460RT) includes details about its manufacturing.

Original price was $401,154 in 2014
Agricultural Crawler tractor
Built in Waterloo, Iowa, USA
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 9460RT

This section sums up the dimension and tires information of the tractor.

No data available

No data available

Engine Specifications of John Deere, 9460RT

Get the specifications for the engine and if different options are available.

John Deere PowerTech PSX
Liquid-cooled inline
Turbocharged diesel
6-cylinder 24-valve
StarterElectric
Operating RPM1500-2100
Emission controlExhaust gas recirculation (EGR)
Starter volts12
Rated Power (gross)460 hp [343.0 kW]
Cooling systemVariable ratio belt drive
Rated Power (net)442 hp [329.6 kW]
Displacement826.7 ci [13.5 L]
EmissionsInterim Tier 4
Bore/Stroke5.197x6.496 inches [132 x 165 mm]
Idle RPM900-2200
Oil capacity50.7 qts [48.0 L]
Coolant capacity58.2 qts [55.1 L]
Rated RPM2100
Compression16:1

Transmission Information of John Deere, 9460RTY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

TransmissionJohn Deere PowerShift
ClutchHydraulic wet disc
TypeFull power shift
Gears18 forward and 6 reverse

Mechanical Specs of John Deere, 9460RTY

This section summarizes all mechanical information such as the brake system and other specifications.

CommandView II cab standard with air-conditioning.
Hydraulic wet disc brakes
DriveCrawler
Final drivesOutboard planetary
SteeringHydrostatic power differential

Power Information of John Deere, 9460RTY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent (optional)
Rear PTO Type1000 (1.75)

Hydraulics Specifications of John Deere, 9460RT

Hydraulic system type, pressure, pump flow and valves.

45 gpm (19.1mm SCV) [170.3 lpm]
TypeClosed center pressure flow compensated
78 gpm (High-Flow) [295.2 lpm]
Pump flow48 gpm [181.7 lpm]
Pressure2900 psi [200.0 bar]
SCV flow37 gpm [140.0 lpm]
Valves4 to 6

Three-Point Hitch of John Deere, 9460RT

Hitch category and rear/front lift capacity.

Rear Type4N/3
20,000 lbs (optional) [9072 kg]
Rear lift15,300 lbs [6940 kg]
4N/4
DrawbarCategory 4 standard with heavy-duty support . Optional Cat. 4 reinforcement to 4,581 kg (wide swing) or 4,900 kg. Optional Category 5 drawbar rated to 4,581 kg (wide swing) or 5,440 kg. (2,470 kg)
ControlElectronic draft sensing

Electrical System of John Deere, 9460RT

Battery voltage, charging system and ground.

GroundNegative
Battery CCA925
Batteries3
Charging systemAlternator
Battery volts12
Charging amps200

Frequently asked questions

How much horsepower does the John Deere 9460RT have?

The John Deere 9460RT delivers 460 HP.

What years was the John Deere 9460RT produced?

The John Deere 9460RT was produced in 2012-2014.

What engine does the John Deere 9460RT have?

The John Deere 9460RT is powered by a Turbocharged diesel, 6-cylinder 24-valve engine.

What transmission does the John Deere 9460RT use?

The John Deere 9460RT uses a John Deere PowerShift transmission.

Compare the John Deere 9460RT with another model