Kubota B8200 tractor

Kubota B8200

Power

19 hp

Production

1983-1990

Engine

Diesel, 3-cylinder

Transmission

Hydrostatic

Drive

2WD/4WD

From the same series:

B7200
B9200

Introduction

Kubota B8200 Compact Utility Tractor

Produced between 1983 and 1990, the Kubota B8200 is a compact utility tractor designed for general agricultural tasks, landscaping, and property maintenance. Manufactured in Japan, this model was available in both two-wheel and four-wheel drive configurations.

Engine and Performance

The tractor is powered by the Kubota D950-A-DT, a liquid-cooled, 3-cylinder diesel engine. With a displacement of 0.9 liters (56.6 cubic inches), the engine produces a gross power output of 19 horsepower at a rated speed of 2600 RPM. It utilizes a dry paper element air cleaner for filtration and features a coolant capacity of 4.2 quarts.

Transmission and Drivetrain

The B8200 offers two primary transmission configurations: a hydrostatic transmission providing infinite forward and reverse speeds across three ranges, or a gear-driven transmission featuring 9 forward and 3 reverse speeds. The gear model is equipped with a 7.9-inch dry disc clutch. The drivetrain includes a mechanical rear differential lock to assist with traction in difficult conditions.

Hydraulics and PTO

The hydraulic system is an open-center type operating at 1715 psi. Total flow rates vary based on the drivetrain, with 2WD models providing 4 gallons per minute and 4WD models providing 6 gallons per minute. The tractor is equipped with a Category I rear 3-point hitch featuring position control, capable of lifting 1015 lbs at 24 inches behind the lift points. Power Take-Off (PTO) options include a live rear PTO (540 RPM), an independent mid-mount PTO, and a continuous front PTO driven by a pulley.

Dimensions and Chassis

Built on a 60.4-inch wheelbase, the tractor has an overall length of 106.7 inches and a width of 55.3 inches. The ground clearance is 9.3 inches, allowing for operation over uneven terrain. It features manual steering as standard, with power steering available as an optional upgrade. Braking is handled by dry internal expanding brakes.

Conclusion

The Kubota B8200 is a robust, compact machine suitable for small-scale agricultural work and property management. Its variety of transmission and PTO options, combined with the choice of 2WD or 4WD, allows it to accommodate a wide range of implements and operational requirements.

Videos

Production Information of Kubota, B8200

  • Compact Utility tractor
  • Built in Japan
ManufacturerKubota
Original price$11,400 (1990 B8200HST-D)

Dimension and Tires Information of Kubota, B8200

Front tread35.4 inches [89 cm (4WD)]
Wheelbase60.4 inches [153 cm]
Ground clearance9.3 inches [23 cm]
Height (exhaust)79.6 inches [202 cm]
Length106.7 inches [271 cm]
Rear tread41.3 inches [104 cm]
Front tread32.7 inches [83 cm (2WD)]
Width55.3 inches [140 cm]
Standard tires (ag)Front: 4.00-12. Rear: 8.3-24 (2WD)
Lawn/turf front24x8.5-12
Lawn/turf front(optional)Front: 6-12. Rear: 8.3-24 (4WD)
Lawn/turf front(optional)Front: 6-12. Rear: 12.4-16 (4WD)
Lawn/turf rear13.6-16
Optional tires (ag)Front: 6.50-10. Rear: 12.4-16 (2WD)

Engine Specifications of Kubota, B8200

  • Kubota D950-A-DT
  • Liquid-cooled inline
  • Diesel
  • 3-cylinder
Oil capacity3.3 qts [3.1 L]
Displacement56.6 ci [0.9 L]
Air cleanerDry paper element
Bore/Stroke2.96x2.75 inches [75 x 70 mm]
Coolant capacity4.2 qts [4.0 L]
Starter volts12
Rated RPM2600
Power (gross)19 hp [14.2 kW]

Some literature specifies 4.1 US quarts, the reason for the difference is unknown.

Transmission Information of Kubota, B8200

Transmission variants 1

TypeHydrostatic
GearsInfinite forward and reverse (3-range)
Oil capacity19 qts [18.0 L]

Transmission variants 2

  • Three gears (1-3) plus reverse in three ranges (L-M-H).
TypeGear
Oil capacity19 qts [18.0 L]
Gears9 forward and 3 reverse
Clutch7.9-inch dry disc
  • Hydrostatic
  • 9-speed gear

Mechanical Specs of Kubota, B8200

  • Two- or four-wheel drive
  • Dry internal expanding brakes
  • Two-post ROPS.
Differential lockMechanical rear
SteeringManual

Power Information of Kubota, B8200

Engine RPM2600@2600
Rear PTOLive
Mid PTOIndependent (hydro)
Mid PTO(optional)748@2534
Rear PTO Type540 (1.375)
Rear PTO Type(optional)2416@2534
Mid PTO Type31/32 10-spline
Engine RPM540@2534
Front PTO TypePulley
Front PTOContinuous
Engine RPM1745@2534

Hydraulics Specifications of Kubota, B8200

TypeOpen center
Type(optional)6 gpm (4WD early) [22.7 lpm]
Total flow4 gpm (2WD early) [15.1 lpm]
Capacity4.8 gal [18.2 L]
Capacity(optional)6.5 gpm (late) [24.6 lpm]
Pressure1715 psi [118.2 bar]

Three-Point Hitch of Kubota, B8200

Rear TypeI
Rear lift (at 24"/610mm)1015 lbs [460 kg]
ControlPosition control
Rear lift (at ends)1280 lbs [580 kg]

Electrical System of Kubota, B8200

Charging systemAlternator
Charging amps(optional)35
Battery volts12

Where it sits

With 19 HP, the Kubota B8200 sits between B7200 (17 HP) and B1750 (20 HP) in Kubota's range. Its power puts it in the 10th percentile of 1980s models in our database (2052 machines).

Frequently asked questions

How much horsepower does the Kubota B8200 have?

The Kubota B8200 delivers 19 HP.

What years was the Kubota B8200 produced?

The Kubota B8200 was produced in 1983-1990.

What engine does the Kubota B8200 have?

The Kubota B8200 is powered by a Diesel, 3-cylinder engine.

What transmission does the Kubota B8200 use?

The Kubota B8200 uses a Hydrostatic transmission.

Is the Kubota B8200 4WD?

The Kubota B8200 is available in 2WD/4WD.

Compare the Kubota B8200 with another model