Introduction
Kubota L2650 Compact Utility Tractor
The Kubota L2650 is a compact utility tractor produced between 1991 and 1993, belonging to the L-series range. Designed for versatility in agricultural and maintenance applications, this model features a 1.4-liter liquid-cooled engine and is available in both two-wheel and four-wheel drive configurations.
Engine and Performance
The tractor is powered by a 1.4-liter, three-cylinder engine featuring direct fuel injection. It produces a gross power output of 29 horsepower (21.6 kW) at a rated speed of 2600 RPM, delivering 65.8 lb-ft (89.2 Nm) of torque. The cooling system is liquid-based, and the engine requires an oil capacity of 6 quarts (5.7 liters).
Transmission and Drivetrain
The L2650 offers two transmission options: a standard 8-speed mechanical shuttle transmission or the Kubota Glide Shift (GST) system. The mechanical shuttle allows for 8 forward and 8 reverse gears, utilizing a left-hand reverser lever. The GST transmission provides the capability for on-the-go shifting without requiring clutch operation. Both configurations are designed to provide controlled maneuverability for various field tasks.
Hydraulics and Power Take-Off
The hydraulic system utilizes an open-center design with a pump flow rate of 8.2 gpm (31.0 lpm) and a system pressure of 2490 psi (171.7 bar). The rear hitch is a Category I three-point type, offering a lift capacity of 2,645 lbs (1199 kg) at the ends. The rear Power Take-Off (PTO) supports 540 and 1000 RPM speeds, with an optional mid-mount PTO available for secondary implements.
Mechanical and Dimensions
Built with a wheelbase of 64.6 inches (164 cm), the tractor features power steering and wet disc brakes for enhanced control. The operator station is equipped with a two-post Roll-Over Protective Structure (ROPS), with an optional canopy available. Ground clearance is rated at 13.6 inches (34 cm), facilitating operation on uneven terrain.
Conclusion
The Kubota L2650 serves as a robust and reliable utility platform for small to medium-sized agricultural operations. Its combination of hydraulic capacity, varied transmission choices, and compact dimensions makes it well-suited for tasks requiring maneuverability without compromising on engine performance.
Production Information of Kubota, L2650
- Compact Utility tractor
| Manufacturer | Kubota |
|---|
Dimension and Tires Information of Kubota, L2650
| Front tread | 37.8/41.7/45.7/49.6 inches [96/105/116/125 cm (2WD)] |
|---|---|
| Wheelbase | 64.6 inches [164 cm] |
| Height (ROPS) | 83.1 inches [211 cm] |
| Height (steering wheel) | 58.1 inches [147 cm] |
| Length | 109.1 inches [277 cm] |
| Front tread | 44.1 inches [112 cm (4WD)] |
| Ground clearance | 13.6 inches [34 cm] |
| Width | 51.4 inches [130 cm] |
| Rear tread | 40.6/44.3/48/51.4/55.1 inches [103/112/121/130/139 cm] |
| Standard tires (ag) | Front: 4.00-15. Rear: 11.2-24 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 7-16. Rear: 11.2-24 (4WD) |
Engine Specifications of Kubota, L2650
- Liquid-cooled
| Starter volts | 12 |
|---|---|
| Displacement | 85.1 ci [1.4 L] |
| Oil capacity | 6 qts [5.7 L] |
| Fuel system | Direct injection |
| Bore/Stroke | 3.3x3.2 inches [84 x 81 mm] |
| Oil change | 200 h |
| Coolant capacity | 4.9 qts [4.6 L] |
| Torque | 65.8 lb-ft [89.2 Nm] |
| Rated RPM | 2600 |
| Power (gross) | 29 hp [21.6 kW] |
Transmission Information of Kubota, L2650
Transmission variants 1
- Four gears (1-4) in two ranges (Low-High) with left-hand reverser lever. Gears shifted with right-hand gear shift on the console. Ranges shifted with left-hand lever beside seat. Shuttle shifting is synchronized, using the clutch and at low engine RPMs. Tractor must be stopped to shift ranges. The transmission may be equipped with a dual-stage clutch. This can be identified if the PTO shift has 1000 RPMs on the left, and 540 RPMs on the right.
| Type | Mechanical shuttle |
|---|---|
| Gears | 8 forward and reverse |
Transmission variants 2
- Kubota Glide Shift (GST) allows for on-the-go shifting without using the clutch. Transmission should be shifted one gear at a time using the left-hand gear lever. Forward-reverse shuttle shifting may be done without the clutch.
| Transmission | Kubota Glide Shift |
|---|---|
| Oil capacity | 28.5 qts [27.0 L] |
| Gears | 8 forward and reverse |
| Clutch | Dry disc |
- 8-speed mechanical shuttle
- 8-speed
Mechanical Specs of Kubota, L2650
- Two- or four-wheel drive
- Two-post ROPS. Optional canopy.
- Wet disc brakes
| Differential lock | Mechanical rear lock |
|---|---|
| Steering | Power |
Power Information of Kubota, L2650
| Rear PTO | Transmssion |
|---|---|
| Mid PTO Type | 1080/2000 |
| Mid PTO | Optional |
| Mid PTO(optional) | Live (optional) |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of Kubota, L2650
| Type | Open center |
|---|---|
| Pump flow | 8.2 gpm [31.0 lpm] |
| Capacity | 7.5 gal [28.4 L] |
| Pressure | 2490 psi [171.7 bar] |
Three-Point Hitch of Kubota, L2650
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1,985 lbs [900 kg] |
| Control | Position control with optional draft control |
| Rear lift (at ends) | 2,645 lbs [1199 kg] |
Electrical System of Kubota, L2650
| Ground | Negative |
|---|---|
| Battery CCA | 490 |
| Battery volts | 12 |
Where it sits
With 29 HP, the Kubota L2650 sits just above L2250 (26 HP) in Kubota's range. Its power puts it in the 17th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the Kubota L2650 have?
The Kubota L2650 delivers 29 HP.
What years was the Kubota L2650 produced?
The Kubota L2650 was produced in 1991-1993.
What transmission does the Kubota L2650 use?
The Kubota L2650 uses a Mechanical shuttle transmission.
Is the Kubota L2650 4WD?
The Kubota L2650 is available in 2WD/4WD.