Kubota M8-181
Power
180 hp
Production
2020+
Engine
Diesel, 6-cylinder
Transmission
Six-speed power shift
Weight
19510 lbs [8849 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Kubota, M8-181
The production information of the tractor (M8-181) includes details about its manufacturing.
| Built in Winnigpeg, Manitoba, Canada |
| Row-Crop tractor |
| Distributor | Kubota |
|---|---|
| Manufacturer | Versatile |
Dimension and Tires Information of Kubota, M8-181
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 114 inches [289 cm] |
|---|---|
| Bar rear axle | 4.13 by 118 inches [104 by 2997 mm] |
| Bar rear axle | 4.13 by 98 inches [104 by 2489 mm] |
| Height | 128 inches [325 cm] |
| Shipping weight | 19510 lbs [8849 kg] |
No data available
Engine Specifications of Kubota, M8-181
Get the specifications for the engine and if different options are available.
| Cummins B6.7 |
| Liquid-cooled |
| Diesel |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 408.3 ci [6.7 L] |
| Power | 180 hp [134.2 kW] |
| Bore/Stroke | 4.21x4.88 inches [107 x 124 mm] |
| Starter | Electric |
| Rated RPM | 2100 |
| Emissions | Tier 4 |
Transmission Information of Kubota, M8-181Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Six-speed power shift |
|---|---|
| Gears | 30 forward and 15 reverse |
Transmission variants 2
| Type | Continuously-variable transmission |
|---|---|
| Gears | Infinite forward and reverse |
| 30-speed six-speed power shift |
| Continuously-variable transmission |
Mechanical Specs of Kubota, M8-181Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. |
| Power steering |
| Trailer brakes | Hydraulic OptOptional |
|---|
Power Information of Kubota, M8-181Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Front PTO Type | 1000 (1.375) |
| 1000 (1.75) | |
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of Kubota, M8-181
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed-center load sensing |
|---|---|
| SCV flow | 31.7 gpm [120.0 lpm] |
| 42.2 gpmOptOptional [159.7 lpm] | |
| Rear valves | 3 to 5 |
| Steering flow | 11.1 gpm [42.0 lpm] |
| Pump flow | 31.7 gpm [120.0 lpm] |
Three-Point Hitch of Kubota, M8-181
Hitch category and rear/front lift capacity.
| Rear Type | III/IIIN |
|---|---|
| Front lift | 8818 lbs [3999 kg] |
| Front Hitch | IIIN |
| Rear lift (at 24"/610mm) | 12478 lbs [5660 kg] |
| 15543 lbsOptOptional [7050 kg] |
Electrical System of Kubota, M8-181
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Kubota M8-181 have?
The Kubota M8-181 delivers 180 HP.
What years was the Kubota M8-181 produced?
The Kubota M8-181 was produced in 2020+.
What engine does the Kubota M8-181 have?
The Kubota M8-181 is powered by a Diesel, 6-cylinder engine.
What transmission does the Kubota M8-181 use?
The Kubota M8-181 uses a Six-speed power shift transmission.
How much does the Kubota M8-181 weigh?
The Kubota M8-181 weighs 19510 lbs [8849 kg].
Is the Kubota M8-181 4WD?
The Kubota M8-181 is available in 4WD.