Introduction
Production Information of Landini, 5-080H
The production information of the tractor (5-080H) includes details about its manufacturing.
| Manufacturer | Landini |
|---|
Dimension and Tires Information of Landini, 5-080H
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 18.5 inches [46 cm] |
|---|---|
| Wheelbase | 92 inches [233 cm] |
| Height (cab) | 101 inches [256 cm] |
| Height (ROPS) | 100.5 inches [255 cm] |
| Length | 163.8 inches [416 cm] |
| Weight | 8,030 lbs [3642 kg] |
| Width | 83 inches [210 cm] |
| Ag front | 380/70R24 |
|---|---|
| Ag rear | 480/70R34 |
Engine Specifications of Landini, 5-080H
Get the specifications for the engine and if different options are available.
| Perkins 1104D-44 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Emissions | Tier III |
|---|---|
| Displacement | 268.5 ci [4.4 L] |
| Power | 74 hp [55.2 kW] |
| Bore/Stroke | 4.13x5.00 inches [105 x 127 mm] |
| Starter type | Electric |
| Torque | 192.5 lb-ft [261.0 Nm] |
Transmission Information of Landini, 5-080HY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Standard transmission. Three speeds with four ranges. Optional creeper range provides 16 speeds in each direction. Either with TECHNO mechanical shuttle, or TOP hydraulic shuttle. |
| Transmission | SPEED FOUR |
|---|---|
| Type | Partial power shift with shuttle |
| Gears | 12 forward and reverse |
Transmission variants 2
| The T-Tronic adds a high-medium-low power shift to the basic transmission with hydraulic shuttle. |
| Transmission | TOP T-TRONIC |
|---|---|
| Type | Partial power shift with hydraulic shuttle |
| Gears | 36 forward and 12 reverse |
Transmission variants 3
| Overdrive on the basic transmission. |
| Transmission | SPEED FOUR Overdrive |
|---|---|
| Type | Partial power shift with shuttle |
| Gears | 24 forward and 12 reverse |
Transmission variants 4
| T-Tronic plus basic transmission with creeper increases available speeds. |
| Transmission | TOP T-TRONIC Creeper |
|---|---|
| Type | Partial power shift with hydraulic shuttle |
| Gears | 48 forward and 16 reverse |
| 12-speed partial power shift with shuttle |
| 48-speed partial power shift with hydraulic shuttle |
| 36-speed partial power shift with hydraulic shuttle |
| 24-speed partial power shift with shuttle |
Mechanical Specs of Landini, 5-080HY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Powerfarm cab standard. Air-conditioning and pneumatic seat optional. |
Power Information of Landini, 5-080HY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Ground (optional) | |
| 540/750/1000 (optional) | |
| Rear PTO Type | 540/750 |
| 540/1000 (optional) |
Hydraulics Specifications of Landini, 5-080H
Hydraulic system type, pressure, pump flow and valves.
| Valves | 2 to 4 |
|---|---|
| Pump flow | 13.8 gpm [52.2 lpm] |
| Total flow | 21.6 gpm [81.8 lpm] |
Three-Point Hitch of Landini, 5-080H
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Front lift | 3,960 lbs [1796 kg] |
| Rear lift | 9,570 lbs [4340 kg] |
| Front Hitch | II (optional) |
Frequently asked questions
How much horsepower does the Landini 5-080H have?
The Landini 5-080H delivers 74 HP.
What years was the Landini 5-080H produced?
The Landini 5-080H was produced in 2010-2020.
What engine does the Landini 5-080H have?
The Landini 5-080H is powered by a Diesel, 4-cylinder engine.
What transmission does the Landini 5-080H use?
The Landini 5-080H uses a SPEED FOUR transmission.
How much does the Landini 5-080H weigh?
The Landini 5-080H weighs 8,030 lbs [3642 kg].
Is the Landini 5-080H 4WD?
The Landini 5-080H is available in 4WD.