Introduction
Production Information of Landini, Rex 80
The production information of the tractor (Rex 80) includes details about its manufacturing.
| Orchard/Vineyard tractor |
| Manufacturer | Landini (a part of Argo) |
|---|
Dimension and Tires Information of Landini, Rex 80
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 15 inches [38 cm] |
|---|---|
| F Wheelbase | 79.3 inches [201 cm] |
| V Length | 146.1 inches [371 cm] |
| GT Length | 140.6 inches [357 cm] |
| GT Wheelbase | 84 inches [213 cm] |
| V Width | 48.6 inches [123 cm] |
| F Width | 52.4 inches [133 cm] |
| F Length | 135.8 inches [344 cm] |
| V Ground clearance | 9.8 inches [24 cm] |
| GT/F Weight | 6173 lbs [2800 kg] |
| F Weight | 5952 lbs [2699 kg] |
| GT Width | 58.7 inches [149 cm] |
No data available
Engine Specifications of Landini, Rex 80
Get the specifications for the engine and if different options are available.
| Perkins 1004-42 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Torque RPM | 1400 |
|---|---|
| Displacement | 258 ci [4.2 L] |
| Compression | 15.5:1 |
| Bore/Stroke | 4.055x5.00 inches [103 x 127 mm] |
| Starter volts | 12 |
| Torque | 209.5 lb-ft [284.1 Nm] |
| Rated RPM | 2200 |
| Power | 80 hp [59.7 kW] |
Transmission Information of Landini, Rex 80Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Shuttle |
|---|---|
| Gears | 12 forward and reverse |
| Clutch | 279.4mm dry disc |
Transmission variants 2
| Type | Creeper |
|---|---|
| Gears | 24 forward and 12 reverse |
Transmission variants 3
| Transmission | Deltashift |
|---|---|
| Gears | 40 forward and 12 reverse |
| Clutch | Wet disc |
| 12-speed shuttle |
| 24-speed creeper |
| 40-speed |
Mechanical Specs of Landini, Rex 80Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post foldable mid-mount ROPS. Cab optional. |
| Power steering |
| Wet disc brakes |
Power Information of Landini, Rex 80Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 540/1000 | |
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540/750 |
Hydraulics Specifications of Landini, Rex 80
Hydraulic system type, pressure, pump flow and valves.
| 8.1 gpm*With Deltashift transmission. [30.7 lpm] | |
| F Valves | 2 |
| 22.4 gpm*With Deltashift transmission. [84.8 lpm] | |
| Total flow | 19.2 gpm [72.7 lpm] |
| GT Valves | 3 |
| Steering flow | 5 gpm [18.9 lpm] |
| Pump flow | 14.2 gpm [53.7 lpm] |
Three-Point Hitch of Landini, Rex 80
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift | 5732 lbs [2600 kg] |
Electrical System of Landini, Rex 80
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Landini Rex 80 have?
The Landini Rex 80 delivers 80 HP.
What years was the Landini Rex 80 produced?
The Landini Rex 80 was produced in 2001-2020.
What engine does the Landini Rex 80 have?
The Landini Rex 80 is powered by a Diesel, 4-cylinder engine.
What transmission does the Landini Rex 80 use?
The Landini Rex 80 uses a Shuttle transmission.
How much does the Landini Rex 80 weigh?
The Landini Rex 80 weighs 6173 lbs [2800 kg].
Is the Landini Rex 80 4WD?
The Landini Rex 80 is available in 2WD/4WD.