
LS MT225E
Power
24 hp
Production
2019-2023
Engine
Diesel, 3-cylinder
Transmission
Synchro shuttle
Weight
2434 lbs [1104 kg]
Drive
4WD
From the same series:
Introduction
Production Information of LS, MT225E
The production information of the tractor (MT225E) includes details about its manufacturing.
| Compact Utility tractor |
| Manufacturer | LS |
|---|
Dimension and Tires Information of LS, MT225E
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 66 inches [167 cm] |
|---|---|
| Shuttle Weight | 2434 lbs [1104 kg] |
| Height (ROPS) | 88 inches [223 cm] |
| Length | 118 inches [299 cm] |
| Hydro Weight | 2469 lbs [1119 kg] |
| Width | 54 inches [137 cm] |
| Standard tires (ag) | Front: 7-14. Rear: 11.2-24 |
|---|---|
| Industrial rear | 43x16-20 |
| Industrial front | 25x8.5-14 |
| Lawn/turf front | 25x8.5-14 |
| Lawn/turf rear | 41x14-20 |
Engine Specifications of LS, MT225E
Get the specifications for the engine and if different options are available.
| Mitsubishi S3L2 |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 80.4 ci [1.3 L] |
| Power (gross) | 24.6 hp [18.3 kW] |
| Bore/Stroke | 3.071x3.622 inches [78 x 92 mm] |
| Starter volts | 12 |
| Rated RPM | 2500 |
| Fuel system | Indirect injection |
| Emissions | Tier IV |
Transmission Information of LS, MT225EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Synchro shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| 12-speed synchro shuttle |
| Hydrostatic |
Mechanical Specs of LS, MT225EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Power steering |
| Wet disc brakes |
Power Information of LS, MT225EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of LS, MT225E
Hydraulic system type, pressure, pump flow and valves.
| Valves | 0 to 2 |
|---|---|
| Steering flow | 4.6 gpm [17.4 lpm] |
| Pump flow | 7.9 gpm [29.9 lpm] |
| Total flow | 12.5 gpm [47.3 lpm] |
Three-Point Hitch of LS, MT225E
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position control |
| Rear lift (at ends) | 1808 lbs [820 kg] |
Electrical System of LS, MT225E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging volts | 12 |
| Charging system | Alternator |
| Charging amps | 50 |
Frequently asked questions
How much horsepower does the LS MT225E have?
The LS MT225E delivers 24 HP.
What years was the LS MT225E produced?
The LS MT225E was produced in 2019-2023.
What engine does the LS MT225E have?
The LS MT225E is powered by a Diesel, 3-cylinder engine.
What transmission does the LS MT225E use?
The LS MT225E uses a Synchro shuttle transmission.
How much does the LS MT225E weigh?
The LS MT225E weighs 2434 lbs [1104 kg].
Is the LS MT225E 4WD?
The LS MT225E is available in 4WD.