Introduction
Production Information of Marshall, 802
The production information of the tractor (802) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Marshall |
|---|---|
| Original price | $20,500 (1984) |
Dimension and Tires Information of Marshall, 802
This section sums up the dimension and tires information of the tractor.
| Weight | 6550 lbs [2971 kg] |
|---|
| Ag front | 7.50x16 |
|---|---|
| Ag rear | 14.00x34 |
Engine Specifications of Marshall, 802
Get the specifications for the engine and if different options are available.
| Leyland 4/98 TT |
| Liquid-cooled |
| Turbocharged diesel |
| 4-cylinder |
| Power | 82 hp [61.1 kW] |
|---|---|
| Displacement | 230 ci [3.8 L] |
| Compression | 16.8:1 |
| Bore/Stroke | 3.86x4.92 inches [98 x 125 mm] |
| Starter volts | 12 |
| Rated RPM | 2200 |
Transmission Information of Marshall, 802Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Synchromesh |
|---|---|
| Gears | 9 forward and 3 reverse |
| Clutch | 305mm hydraulic dry disc |
Mechanical Specs of Marshall, 802Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard with heat. |
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of Marshall, 802Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of Marshall, 802
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2600 psi [179.3 bar] |
|---|---|
| Pump flow | 14.5 gpm [54.9 lpm] |
Three-Point Hitch of Marshall, 802
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift | 5200 lbs [2358 kg] |
Electrical System of Marshall, 802
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Charging amps | 36 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Marshall 802 have?
The Marshall 802 delivers 82 HP.
What years was the Marshall 802 produced?
The Marshall 802 was produced in 1982-1984.
What engine does the Marshall 802 have?
The Marshall 802 is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the Marshall 802 use?
The Marshall 802 uses a Synchromesh transmission.
How much does the Marshall 802 weigh?
The Marshall 802 weighs 6550 lbs [2971 kg].
Is the Marshall 802 4WD?
The Marshall 802 is available in 2WD.