Massey Ferguson 1140 tractor

Massey Ferguson 1140

Power

30 hp

Production

1991-1993

Engine

Diesel, 3-cylinder

Transmission

Partially synchronized

Weight

2590 lbs [1174 kg]

Drive

2WD/4WD

From the same series:

1145

Introduction

Production Information of Massey Ferguson, 1140

The production information of the tractor (1140) includes details about its manufacturing.

Original price was $13,200 in 1992
Compact Utility tractor
DistributorMassey Ferguson
ManufacturerIseki

Dimension and Tires Information of Massey Ferguson, 1140

This section sums up the dimension and tires information of the tractor.

Ground clearance12 inches [30 cm]
Wheelbase67 inches [170 cm]
2WD Operating weight2590 lbs [1174 kg]
Height (ROPS)82.5 inches [209 cm]
Length121 inches [307 cm]
Front tread40 to 41.8 inches [101 to 106 cm (2WD)]
4WD Operating weight2700 lbs [1224 kg]
Width52.75 inches [133 cm]
Rear tread40 to 52.75 inches [101 to 133 cm]
Front tread42.1 inches [106 cm (4WD)]
Standard tires (ag)Front: 5.00x15. Rear: 12.4x24 (2WD)
Lawn/turf rear355/80D-20
212/80D-15 (4WD)
Front: 7x16. Rear: 12.4x24 (4WD)
Lawn/turf front24x8.50-12 (2WD)

Engine Specifications of Massey Ferguson, 1140

Get the specifications for the engine and if different options are available.

Isuzu E3AD1
Liquid-cooled inline
Diesel
3-cylinder
Starter power1.9 hp [1.4 kW]
Starter volts12
Fuel systemIndirect injection
Oil capacity5.1 qts [4.8 L]
Pre-heatingGlow plugs
Rated RPM2600
Air cleanerDual dry element
Displacement91.4 ci [1.5 L]
Power30 hp [22.4 kW]
Bore/Stroke3.385x3.385 inches [86 x 86 mm]
Firing order1-3-2
Coolant capacity7.2 qts [6.8 L]
Torque RPM1600
Torque73 lb-ft [99.0 Nm]

Transmission Information of Massey Ferguson, 1140Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four gears (1-4) in four ranges (1-4) with synchronized shuttle shifting. Gears three and four are synchronized.
TypePartially synchronized
Gears16 forward and reverse
Clutch225mm dry disc

Mechanical Specs of Massey Ferguson, 1140Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Two-post fixed ROPS.
Power steering
Mechanical wet disc brakes

Power Information of Massey Ferguson, 1140Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Mid PTO Type1950 (1.00 15-spline)
Mid PTOIndependent OptOptional
ClutchElectro-hydraulic
Engine RPM1960@2600
Rear PTO Type540 (1.375)

Hydraulics Specifications of Massey Ferguson, 1140

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Pump flow6.9 gpm [26.1 lpm]
Valves2 OptOptional
Capacity6.6 gal [25.0 L]
Steering cap.2.8 qts [2.6 L]
Pressure2133 psi [147.1 bar]

Three-Point Hitch of Massey Ferguson, 1140

Hitch category and rear/front lift capacity.

Rear TypeI
Rear lift (at 24"/610mm)1785 lbs [809 kg]
ControlPosition control
Rear lift (at ends)2866 lbs [1300 kg]

Electrical System of Massey Ferguson, 1140

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Battery CCA670
Charging systemAlternator
Charging amps40

Frequently asked questions

How much horsepower does the Massey Ferguson 1140 have?

The Massey Ferguson 1140 delivers 30 HP.

What years was the Massey Ferguson 1140 produced?

The Massey Ferguson 1140 was produced in 1991-1993.

What engine does the Massey Ferguson 1140 have?

The Massey Ferguson 1140 is powered by a Diesel, 3-cylinder engine.

What transmission does the Massey Ferguson 1140 use?

The Massey Ferguson 1140 uses a Partially synchronized transmission.

How much does the Massey Ferguson 1140 weigh?

The Massey Ferguson 1140 weighs 2590 lbs [1174 kg].

Is the Massey Ferguson 1140 4WD?

The Massey Ferguson 1140 is available in 2WD/4WD.

Compare the Massey Ferguson 1140 with another model