Massey Ferguson 1210
Power
16 hp[P] hp
Production
1993-1995
Engine
Diesel, 3-cylinder
Transmission
Gear
Drive
2WD/4WD
From the same series:
Introduction
Massey Ferguson 1210 Compact Utility Tractor
The Massey Ferguson 1210 is a compact utility tractor produced between 1993 and 1995. Manufactured by Iseki in Japan, this machine was designed for small-scale agricultural operations, landscaping, and property maintenance, offering versatility through various drivetrain and transmission configurations.
Engine and Performance
The tractor is powered by an Iseki E3100 3-cylinder diesel engine. This liquid-cooled unit features a displacement of 61.4 cubic inches (1.0 liter) and produces a net power output of 17.4 horsepower at a rated engine speed of 2500 RPM. The engine employs indirect injection and utilizes glow plugs for cold-start assistance.
Transmission and Drivetrain
Operators can select between different transmission types to suit specific tasks: a standard 6-forward and 2-reverse gear transmission, a 2-range hydrostatic transmission for infinite speed control, or an optional 9-forward and 3-reverse creeper transmission. The tractor is available in either two-wheel or four-wheel drive and is equipped with a mechanical rear differential lock to improve traction in challenging soil conditions.
Hydraulics and Hitch
The hydraulic system utilizes an open-center design with a total flow capacity of 7.7 gallons per minute (29.1 liters per minute). It features a Category I rear three-point hitch with position control. The lift capacity at the hitch ends is 1,210 lbs (548 kg), providing sufficient strength for standard light-duty implements.
Dimensions and Handling
Built with a 59.4-inch (150 cm) wheelbase, the Massey Ferguson 1210 is designed for maneuverability in confined spaces. Its minimum width is 40.9 inches (103 cm), and it provides a ground clearance of 10 inches (25 cm). The operator station includes a two-post folding Roll-Over Protective Structure (ROPS) for safety during operation.
Conclusion
The Massey Ferguson 1210 is a robust compact tractor suited for landowners and small-scale operators requiring a reliable machine for mowing, light tillage, and transport tasks. Its variety of transmission options and compact dimensions make it a versatile tool for precision work in limited areas.
Production Information of Massey Ferguson, 1210
- Original price was $10,500 in 1996
- Built in Japan
- Compact Utility tractor
| Distributor | Massey Ferguson |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Massey Ferguson, 1210
| 4WD Front tread | 32.7 inches [83 cm] |
|---|---|
| Wheelbase | 59.4 inches [150 cm] |
| Ground clearance | 10 inches [25 cm] |
| Height (Folded ROPS) | 59.5 inches [151 cm] |
| Length | 108.3 inches [275 cm] |
| Rear tread | 33.5/39.4 inches [85/100 cm] |
| 2WD Front tread | 32.7/36.2 inches [83/91 cm] |
| Width | 40.9 inches [103 cm] |
Minimum width
| 2WD Standard tires (ag) | Front: 4.50-10. Rear: 8-16 |
|---|---|
| Lawn/turf rear | 315x75D-15 |
| 4WD Standard tires (ag) | Front: 5.00-12. Rear: 8-16 |
| Lawn/turf front | 24x8.50-12 |
Engine Specifications of Massey Ferguson, 1210
- Iseki E3100
- Liquid-cooled inline
- Diesel
- 3-cylinder
| Starter | Electric |
|---|---|
| Torque RPM | 1800 |
| Fuel system | Indirect injection |
| Starter volts | 12 |
| Pre-heating | Glow plugs |
| Compression | 22.5:1 |
| Air cleaner | Dry |
| Displacement | 61.4 ci [1.0 L] |
| Maximum Power (net) | 17.4 hp [13.0 kW] |
| Bore/Stroke | 2.913x3.070 inches [74 x 78 mm] |
| Torque | 41.5 lb-ft [56.3 Nm] |
| Oil capacity | 3.3 qts [3.1 L] |
| Coolant capacity | 5.4 qts [5.1 L] |
| Idle RPM | 950-2750 |
| Rated RPM | 2500 |
Transmission Information of Massey Ferguson, 1210
Transmission variants 1
- Three gears, plus reverse, in two ranges. Tractor must be stopped, and clutch used, to shift gear or range.
| Type | Gear |
|---|---|
| Oil capacity | 10.6 qts [10.0 L] |
| Gears | 6 forward and 2 reverse |
| Clutch | 184mm dry disc |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
Transmission variants 3
- Optional additional creeper range for the standard transmission.
| Type | Creeper |
|---|---|
| Gears | 9 forward and 3 reverse |
- 6-speed gear
- Hydrostatic
- 9-speed creeper
Mechanical Specs of Massey Ferguson, 1210
- Two-post folding ROPS.
- Two- or four-wheel drive
- Mechanical wet disc brakes
| Steering(optional) | Power |
|---|---|
| Steering | Manual |
| Final drives | Spur gear |
| Differential lock | Mechanical rear |
Power Information of Massey Ferguson, 1210
| Rear PTO | Transmission |
|---|---|
| Mid PTO Type | 2000 |
| Engine RPM | 540@2307 |
| Clutch | Dry disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Massey Ferguson, 1210
| Type | Open center |
|---|---|
| Steering flow | 2.5 gpm [9.5 lpm] |
| Total flow | 7.7 gpm [29.1 lpm] |
| Capacity | 2.64 gal [10.0 L] |
| Pump flow | 5.2 gpm [19.7 lpm] |
Three-Point Hitch of Massey Ferguson, 1210
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 882 lbs [400 kg] |
| Control | Position control |
| Rear lift (at ends) | 1210 lbs [548 kg] |
Electrical System of Massey Ferguson, 1210
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 325 |
| Charging system | Alternator |
| Charging amps | 40 |
Where it sits
With 16 hp[P] HP, the Massey Ferguson 1210 sits between 1205 (15 HP) and 1215 (18 HP) in Massey Ferguson's range. Its power puts it in the 3th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the Massey Ferguson 1210 have?
The Massey Ferguson 1210 delivers 16 hp[P] HP.
What years was the Massey Ferguson 1210 produced?
The Massey Ferguson 1210 was produced in 1993-1995.
What engine does the Massey Ferguson 1210 have?
The Massey Ferguson 1210 is powered by a Diesel, 3-cylinder engine.
What transmission does the Massey Ferguson 1210 use?
The Massey Ferguson 1210 uses a Gear transmission.
Is the Massey Ferguson 1210 4WD?
The Massey Ferguson 1210 is available in 2WD/4WD.