Introduction
Production Information of Massey Ferguson, 1240
The production information of the tractor (1240) includes details about its manufacturing.
| The Massey Ferguson 1240 is similar to the Iseki model TK527. |
| Original price was $15,000 in 1999 |
| Compact Utility tractor |
| Distributor | Massey Ferguson |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Massey Ferguson, 1240
This section sums up the dimension and tires information of the tractor.
| Rear tread | 43.3 to 55.9 inches [109 to 141 cm] |
|---|---|
| Wheelbase | 64.6 inches [164 cm] |
| Height (Folded ROPS) | 67.7 inches [171 cm] |
| Height (ROPS) | 84.2 inches [213 cm] |
| Length | 118.7 inches [301 cm] |
| Ground clearance | 11.8 inches [29 cm] |
| 2WD Shipping weight | 2535 lbs [1149 kg] |
| Width | 55.1 inches (min) [139 cm] |
| 4WD Front tread | 41.7 inches [105 cm] |
| 2WD Front tread | 37.5 to 41.7 inches [95 to 105 cm] |
| 4WD Shipping weight | 2645 lbs [1199 kg] |
| Ag front | 5.00-15 |
|---|---|
| Ag rear | 11.2-24 |
Engine Specifications of Massey Ferguson, 1240
Get the specifications for the engine and if different options are available.
| Iseki E3CF |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Starter volts | 12 |
|---|---|
| Torque RPM | 1500 |
| Power (gross) | 28.4 hp [21.2 kW] |
| Coolant capacity | 6.92 qts [6.5 L] |
| Air cleaner | Dry |
| Pre-heating | Glow plugs |
| Fuel system | Indirect injection |
| Displacement | 89.3 ci [1.5 L] |
| Power (net) | 27.6 hp [20.6 kW] |
| Bore/Stroke | 3.39x3.31 inches [86 x 84 mm] |
| Torque | 68.6 lb-ft [93.0 Nm] |
| Rated RPM | 2500 |
| Compression | 21.5:1 |
Transmission Information of Massey Ferguson, 1240Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in four ranges with shuttle. |
| Type | Synchro shuttle |
|---|---|
| Gears | 16 forward and reverse |
| Clutch | 225mm dry disc |
Mechanical Specs of Massey Ferguson, 1240Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Steering | Power assist |
|---|
Power Information of Massey Ferguson, 1240Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Mid PTO Type | 1885 |
|---|---|
| Rear PTO | Independent |
| Mid PTO | Independent OptOptional |
| Engine RPM | 540@2389 |
| Clutch | Electro-hydraulic |
| Engine RPM | 1885@2500 |
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Massey Ferguson, 1240
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 3.2 gpm [12.1 lpm] |
| Total flow | 9.2 gpm [34.8 lpm] |
| Capacity | 6.1 gal [23.1 L] |
| Pump flow | 6.0 gpm [22.7 lpm] |
Three-Point Hitch of Massey Ferguson, 1240
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position control |
| Rear lift (at ends) | 2866 lbs [1300 kg] |
Electrical System of Massey Ferguson, 1240
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Massey Ferguson 1240 have?
The Massey Ferguson 1240 delivers 28 HP.
What years was the Massey Ferguson 1240 produced?
The Massey Ferguson 1240 was produced in 1992-2002.
What engine does the Massey Ferguson 1240 have?
The Massey Ferguson 1240 is powered by a Diesel, 3-cylinder engine.
What transmission does the Massey Ferguson 1240 use?
The Massey Ferguson 1240 uses a Synchro shuttle transmission.
How much does the Massey Ferguson 1240 weigh?
The Massey Ferguson 1240 weighs 2535 lbs [1149 kg].
Is the Massey Ferguson 1240 4WD?
The Massey Ferguson 1240 is available in 2WD/4WD.