Introduction
Massey Ferguson 240 Utility Tractor
The Massey Ferguson 240 is a utility tractor produced by the British manufacturer Massey Ferguson in Coventry, England. Spanning a production window from 1979 for the UK market to 1999, this model was designed as a versatile, mid-range tractor suitable for general farm duties.
Engine and Performance
The tractor is powered by a Perkins AD3.152 liquid-cooled diesel engine. This 3-cylinder unit features a displacement of 152 cubic inches (2.5 liters) and produces 46 horsepower (34.3 kW) at a rated speed of 2000 RPM. The engine cooling system has a capacity of 9.8 liters, and the unit utilizes a dual dry element air cleaner for filtration. Optional cold-weather starting aids, including an ether injection system and an engine block heater, were available to support operation in varying climates.
Transmission and Drivetrain
The MF 240 is equipped with a sliding gear transmission providing 8 forward and 2 reverse gears. Operation requires the tractor to be at a complete stop with the clutch depressed to change gears. It was offered in both two-wheel drive and four-wheel drive configurations. Steering is facilitated by a power steering system, while braking duties are handled by mechanical drum brakes on early models, transitioning to a differential mechanical wet disc system on later production units.
Hydraulics and PTO
The hydraulic system is an open-center design with a pump flow rate of 9.5 gpm (36.0 lpm) and a system capacity of 8.6 gallons (32.6 liters). It features two valves for implement control. The rear power take-off (PTO) is a live, two-stage clutch system operating at 540 RPM. The rear three-point hitch is categorized as type II/I and includes both position and draft control for precise implement management.
Dimensions and Configuration
The tractor's physical dimensions vary based on the drivetrain. The 2WD model features a 193 cm wheelbase, while the 4WD version measures 195 cm. Ground clearance is 24 cm for the 2WD and 26 cm for the 4WD. The unit is equipped with a two-post Roll-Over Protective Structure (ROPS), with an optional canopy available. Front and rear tread widths are adjustable to accommodate different row spacing and field conditions.
Conclusion
The Massey Ferguson 240 is characterized by its mechanical simplicity and utility-focused design. Its combination of a reliable Perkins engine and a standard 8x2 transmission makes it well-suited for light-to-medium agricultural operations, maintenance work, and livestock management tasks.
Videos
Massey Ferguson 240 Manuals & Documentation
Download the manuals and documentation available for the Massey Ferguson 240: repair and workshop manuals, operator's handbooks, spare-parts catalogs and technical leaflets — free PDF files.
Archive documentation provided for reference, hosted by Tractor-Info.
Production Information of Massey Ferguson, 240
- Production of the Massey Ferguson 240 in the UK market began in 1979. North American production began in 1983.
- Original price was $18,800 in 1998
- Utility tractor
- Built in Coventry, England
| Manufacturer | Massey Ferguson |
|---|
Dimension and Tires Information of Massey Ferguson, 240
| Rear tread | 52 to 76 inches [132 to 193 cm] |
|---|---|
| 2WD Wheelbase | 76.1 inches [193 cm] |
| Width | 66.1 inches [167 cm] |
| 4WD Length | 127.1 inches [322 cm] |
| 4WD Wheelbase | 77 inches [195 cm] |
| 2WD Ground clearance | 9.8 inches [24 cm] |
| 2WD Height (ROPS) | 87 inches [220 cm] |
| 2WD Length | 124.6 inches [316 cm] |
| Front tread | 52 to 72 inches [132 to 182 cm] |
| 4WD Ground clearance | 10.5 inches [26 cm] |
| 4WD Height (ROPS) | 86 inches [218 cm] |
| Standard tires (ag) | Front: 6.00-16. Rear: 13.6-28 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 10.5/80-18. Rear: 14.9-24 (4WD) |
Engine Specifications of Massey Ferguson, 240
- Perkins AD3.152
- Liquid-cooled
- Diesel
- 3-cylinder
| Rated RPM | 2000 |
|---|---|
| Displacement | 152 ci [2.5 L] |
| Air cleaner | Dual dry element |
| Bore/Stroke | 3.60x5.00 inches [91 x 127 mm] |
| Coolant capacity | 10.4 qts [9.8 L] |
| Starter volts | 12 |
| Starter volts(optional) | Block heater (optional) |
| Pre-heating | Ether (optional) |
| Power | 46 hp [34.3 kW] |
Transmission Information of Massey Ferguson, 240
Transmission variants 1
- Tractor must be stopped, and clutch used, to shift gears.
| Type | Sliding gear |
|---|---|
| Gears | 8 forward and 2 reverse |
Mechanical Specs of Massey Ferguson, 240
- Two- or four-wheel drive
- Two-post ROPS. Canopy optional.
- Power steering
| Brakes | Mechanical drum (early) |
|---|
Power Information of Massey Ferguson, 240
| Rear PTO | Live (two-stage clutch) |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of Massey Ferguson, 240
| Type | Open |
|---|---|
| Pump flow | 9.5 gpm [36.0 lpm] |
| Capacity | 8.6 gal [32.6 L] |
| Valves | 2 |
Three-Point Hitch of Massey Ferguson, 240
| Rear Type | II/I |
|---|---|
| Control | Position and draft control |
Electrical System of Massey Ferguson, 240
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 32 |
Where it sits
With 46 HP, the Massey Ferguson 240 sits just above 250 (44 HP) in Massey Ferguson's range. Its power puts it in the 32th percentile of 1980s models in our database (2052 machines).
Frequently asked questions
How much horsepower does the Massey Ferguson 240 have?
The Massey Ferguson 240 delivers 46 HP.
What years was the Massey Ferguson 240 produced?
The Massey Ferguson 240 was produced in 1980-1999.
What engine does the Massey Ferguson 240 have?
The Massey Ferguson 240 is powered by a Diesel, 3-cylinder engine.
What transmission does the Massey Ferguson 240 use?
The Massey Ferguson 240 uses a Sliding gear transmission.
Is the Massey Ferguson 240 4WD?
The Massey Ferguson 240 is available in 2WD/4WD.