Massey Ferguson 263 tractor

Massey Ferguson 263

Power

60 hp

Production

1998-1999

Engine

Turbocharged diesel, 3-cylinder

Transmission

Sliding gear

Drive

2WD/4WD

Introduction

Production Information of Massey Ferguson, 263

The production information of the tractor (263) includes details about its manufacturing.

Original price was $25,000 in 1999
Utility tractor
Built in Coventry, England
ManufacturerMassey Ferguson

Dimension and Tires Information of Massey Ferguson, 263

This section sums up the dimension and tires information of the tractor.

2WD Rear tread56 to 84 inches [142 to 213 cm]
2WD Wheelbase77 inches [195 cm]
Width71.5 inches [181 cm]
4WD Length134 inches [340 cm]
4WD Wheelbase76 inches [193 cm]
Ground clearance13.5 inches [34 cm]
Height (ROPS)74.5 inches [189 cm]
2WD Length132 inches [335 cm]
4WD Rear tread56 to 72 inches [142 to 182 cm]
4WD Front tread51.4 to 63.6 inches [130 to 161 cm]
2WD Front tread48 to 72 inches [121 to 182 cm]
Height (Folded ROPS)72.5 inches [184 cm]
4WD Lawn/turf rear14.9-24
2WD Standard tires (ag)Front: 6.00-16. Rear: 13.6-28
2WD Ag front11L-15
2WD Ag front9.5L-15
4WD Standard tires (ag)Front: 260/80R-20. Rear: 14.9-28
2WD Ag rear14.9-24
2WD Ag front6.5-16
2WD Ag front9.00-10
4WD Lawn/turf front10.5/80-18
2WD Ag rear14.9-28
2WD Ag rear18.4-16.1

Engine Specifications of Massey Ferguson, 263

Get the specifications for the engine and if different options are available.

Perkins 903.27T
Liquid-cooled
3-cylinder
Turbocharged diesel
Coolant capacity10.8 qts [10.2 L]
Oil capacity7.2 qts [6.8 L]
Air cleanerDual paper elements
Rated RPM2250
Compression17.3:1
Displacement165 ci [2.7 L]
Power (net)60 hp [44.7 kW]
Pre-heatingThermostart
Bore/Stroke3.74x5.00 inches [95 x 127 mm]
Starter volts12
Torque RPM1400
Torque145 lb-ft [196.6 Nm]

Transmission Information of Massey Ferguson, 263Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four gears (1-4) plus reverse (R) in two ranges (low/high)
TypeSliding gear
Gears8 forward and 2 reverse
ClutchDry disc

Transmission variants 2

Four gears (1-4) in two ranges (low/high) with synchronized shuttle shifting.
TypeSynchro shuttle
Gears8 forward and reverse
ClutchDry disc
8-speed sliding gear
8-speed synchro shuttle

Mechanical Specs of Massey Ferguson, 263Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Two-post folding ROPS.
Independent mechanical wet disc brakes
Power steering
Differential lockMechanical rear

Power Information of Massey Ferguson, 263Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

2WD Rear PTOLive
Engine RPM540@1789
4WD Rear PTOIndependent
Rear PTO Type540

Hydraulics Specifications of Massey Ferguson, 263

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Pump flow9.5 gpm [36.0 lpm]
Valves2
Capacity11.4 gal [43.1 L]
13.9 gpmOptOptional [52.6 lpm]
Pressure2610 psi [180.0 bar]

Three-Point Hitch of Massey Ferguson, 263

Hitch category and rear/front lift capacity.

Rear TypeII/I
Rear lift (at 24"/610mm)2621 lbs [1188 kg]
ControlPosition and draft control
Rear lift (at ends)3500 lbs [1587 kg]

Electrical System of Massey Ferguson, 263

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Battery CCA420
Charging systemAlternator
Charging amps45

Frequently asked questions

How much horsepower does the Massey Ferguson 263 have?

The Massey Ferguson 263 delivers 60 HP.

What years was the Massey Ferguson 263 produced?

The Massey Ferguson 263 was produced in 1998-1999.

What engine does the Massey Ferguson 263 have?

The Massey Ferguson 263 is powered by a Turbocharged diesel, 3-cylinder engine.

What transmission does the Massey Ferguson 263 use?

The Massey Ferguson 263 uses a Sliding gear transmission.

Is the Massey Ferguson 263 4WD?

The Massey Ferguson 263 is available in 2WD/4WD.

Compare the Massey Ferguson 263 with another model