Introduction
Production Information of Massey Ferguson, 2850E
The production information of the tractor (2850E) includes details about its manufacturing.
| Compact Utility tractor |
| Manufacturer | Massey Ferguson (a part of AGCO) |
|---|
Dimension and Tires Information of Massey Ferguson, 2850E
This section sums up the dimension and tires information of the tractor.
| Length | 132.8 inches [337 cm] |
|---|---|
| Ground clearance | 15 inches [38 cm] |
| Weight | 3858 lbs [1749 kg] |
| Width | 70.1 inches [178 cm] |
| Height | 103.8 inches [263 cm] |
No data available
Engine Specifications of Massey Ferguson, 2850E
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Turbocharged diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 148.6 ci [2.4 L] |
| Power | 48.8 hp [36.4 kW] |
| Bore/Stroke | 3.43x4.03 inches [87 x 102 mm] |
| Starter | Electric |
| Rated RPM | 2600 |
| Emissions | Tier IV |
Transmission Information of Massey Ferguson, 2850EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Mechanical shuttle |
|---|---|
| Gears | 8 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| 8-speed mechanical shuttle |
| Hydrostatic |
Mechanical Specs of Massey Ferguson, 2850EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Power steering |
| Wet disc brakes |
Power Information of Massey Ferguson, 2850EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Massey Ferguson, 2850E
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 7.0 gpm [26.5 lpm] |
| Pump flow | 12.6 gpm [47.7 lpm] |
| Total flow | 19.6 gpm [74.2 lpm] |
Three-Point Hitch of Massey Ferguson, 2850E
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Rear lift (at ends) | 2645 lbs [1199 kg] |
| Rear lift (at 24"/610mm) | 2425 lbs [1099 kg] |
Electrical System of Massey Ferguson, 2850E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Massey Ferguson 2850E have?
The Massey Ferguson 2850E delivers 48 HP.
What years was the Massey Ferguson 2850E produced?
The Massey Ferguson 2850E was produced in 2020-2024.
What engine does the Massey Ferguson 2850E have?
The Massey Ferguson 2850E is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the Massey Ferguson 2850E use?
The Massey Ferguson 2850E uses a Mechanical shuttle transmission.
How much does the Massey Ferguson 2850E weigh?
The Massey Ferguson 2850E weighs 3858 lbs [1749 kg].
Is the Massey Ferguson 2850E 4WD?
The Massey Ferguson 2850E is available in 4WD.