Massey Ferguson 399 tractor

Massey Ferguson 399

Power

101 hp

Production

1987-1997

Transmission

Synchromesh

Weight

7233 lbs [3280 kg]

Drive

2WD/4WD

From the same series:

398

Introduction

Massey Ferguson 399 Utility Tractor

The Massey Ferguson 399 is a utility tractor produced by Massey Ferguson in Coventry, England, between 1987 and 1997. It was designed to serve as a versatile workhorse for agricultural and industrial operations, available in both two-wheel drive and four-wheel drive configurations.

Engine and Performance

The tractor is powered by a 5.8-liter (353.7 ci) liquid-cooled diesel engine featuring direct injection. Early models provided 96 hp, while units produced after January 1988 (starting with serial number U793031P) were upgraded to 101 hp. The engine delivers 277 lb-ft of torque at 1300 RPM. It utilizes a dual dry element air cleaner and requires a 16.3-quart oil capacity for operation.

Transmission and Drivetrain

The Massey Ferguson 399 is equipped with a synchromesh transmission providing 12 forward gears and 4 reverse gears. This configuration allows for a wide range of operational speeds suitable for various field tasks. Mechanical control is supported by power steering and wet disc brakes for improved safety and handling.

Hydraulics and PTO

The hydraulic system utilizes an open-center design with a total flow of 16.8 gpm (63.6 lpm) at a pressure of 3000 psi. It includes a linkage pump providing 7.2 gpm and an auxiliary pump providing 9.5 gpm. The tractor features an independent rear PTO with selectable speeds of 540 and 1000 RPM, utilizing a 1.375-inch shaft.

Hitch and Capacity

The rear hitch is a Category II type featuring both position and draft control. The lift capacity varies depending on the hardware, with telescopic ends providing a capacity of 5507 lbs and fixed ends reaching up to 8109 lbs when measured with links horizontal.

Conclusion

The Massey Ferguson 399 remains a capable utility tractor, balancing mechanical simplicity with the hydraulic and lifting power required for mid-to-heavy agricultural duty. Its dual-drive options and refined engine power make it a robust choice for varied farming environments.

Videos

Massey Ferguson 399 Manuals & Documentation

Download the manuals and documentation available for the Massey Ferguson 399: repair and workshop manuals, operator's handbooks, spare-parts catalogs and technical leaflets — free PDF files.

Archive documentation provided for reference, hosted by Tractor-Info.

Production Information of Massey Ferguson, 399

  • Utility tractor
  • Built in Coventry, England
ManufacturerMassey Ferguson
Manufacturer(optional)$34,300 (1988 4WD )
Original price$28,900 (1988 2WD )

Dimension and Tires Information of Massey Ferguson, 399

2WD Front tread53.7 to 77.8 inches [136 to 197 cm]
2WD Wheelbase101.4 inches [257 cm]
Width77.7 inches [197 cm]
4WD Length169.1 inches [429 cm]
4WD Wheelbase103.9 inches [263 cm]
2WD Clearance (front axle)22.8 inches [57 cm]
2WD Weight7233 lbs [3280 kg]
2WD Length163.4 inches [415 cm]
Rear tread60.2 to 87.7 inches [152 to 222 cm (pressed)]
Rear tread55.5 to 83.5 inches [140 to 212 cm (cast)]
Clearance (drawbar)17.1 inches [43 cm]
4WD Clearance (front axle)16.9 inches [42 cm]
4WD Weight8029 lbs [3641 kg]
Standard tires (ag)Front: 7.50-18. Rear: 18.4-34 (2WD)
Standard tires (ag)(optional)Front: 14.9-24. Rear: 18.4-34 (4WD)

Engine Specifications of Massey Ferguson, 399

  • Liquid-cooled
  • Engine power was increased beginning with engine serial number U793031P, installed on 399 tractors after late January 1988.
Torque277 lb-ft [375.6 Nm]
Torque(optional)750-2310 (late)
Starter volts12
Power96 hp (early) [71.6 kW]
Torque RPM1300
Coolant capacity21.2 qts [20.1 L]
Fuel systemDirect injection
Air cleanerDual dry element
Air cleaner(optional)101 hp (late) [75.3 kW]
Bore/Stroke3.875x5.00 inches [98 x 127 mm]
Oil capacity16.3 qts [15.4 L]
Oil change250 h
Displacement353.7 ci [5.8 L]
Idle RPM750-2420 (early)
Firing order1-5-3-6-2-4
StarterElectric
Rated RPM2200
Compression16:1

Transmission Information of Massey Ferguson, 399

Transmission variants 1

TypeSynchromesh
Gears12 forward and 4 reverse

Mechanical Specs of Massey Ferguson, 399

  • Two- or four-wheel drive
  • Two-post ROPS. Canopy optional.
  • Power steering
  • Wet disc brakes

Power Information of Massey Ferguson, 399

Rear PTOIndependent
Rear PTO Type540/1000 (1.375)

Hydraulics Specifications of Massey Ferguson, 399

TypeOpen center
Total flow16.8 gpm [63.6 lpm]
Total flow(optional)9.5 gpm (aux. pump) [36.0 lpm]
Pressure3000 psi [206.8 bar]
Pump flow7.2 gpm (linkage pump) [27.3 lpm]

Three-Point Hitch of Massey Ferguson, 399

Rear TypeII
Rear Type(optional)8109 lbs (fixed ends) [3678 kg]
Rear lift (at ends)5507 lbs (telescopic ends) [2497 kg]
ControlPosition and draft control
Rear lift4340 lbs [1968 kg]

Capacity with links horizontal

Capacity with links horizontal

Capacity through full lift range

Electrical System of Massey Ferguson, 399

GroundNegative
Battery CCA420
Batteries2
Charging systemAlternator
Battery volts12
Charging amps45

Where it sits

With 101 HP, the Massey Ferguson 399 sits just above 398 (89 HP) in Massey Ferguson's range. Its power puts it in the 72th percentile of 1980s models in our database (2052 machines).

Frequently asked questions

How much horsepower does the Massey Ferguson 399 have?

The Massey Ferguson 399 delivers 101 HP.

What years was the Massey Ferguson 399 produced?

The Massey Ferguson 399 was produced in 1987-1997.

What transmission does the Massey Ferguson 399 use?

The Massey Ferguson 399 uses a Synchromesh transmission.

How much does the Massey Ferguson 399 weigh?

The Massey Ferguson 399 weighs 7233 lbs [3280 kg].

Is the Massey Ferguson 399 4WD?

The Massey Ferguson 399 is available in 2WD/4WD.

Compare the Massey Ferguson 399 with another model