Massey Ferguson 4253 tractor

Massey Ferguson 4253

Power

95 hp

Production

1997-1999

Engine

Turbocharged diesel, 4-cylinder

Transmission

Nonsynchronized gear

Drive

2WD/4WD

From the same series:

4245
4255

Introduction

Massey Ferguson 4253 Utility Tractor

The Massey Ferguson 4253 is a utility tractor produced between 1997 and 1999 in Coventry, England. Part of the 4200 series, this machine was designed for general agricultural applications, offering a balance of mechanical simplicity and operational versatility.

Engine and Performance

The tractor is powered by a Perkins 1004.4TW 4.0-liter, 4-cylinder turbocharged diesel engine. It delivers a net power output of 95 hp (70.8 kW) at a rated speed of 2200 RPM. The engine produces 276 lb-ft (374.3 Nm) of torque at 1500 RPM, providing consistent lugging ability for field tasks. It utilizes a liquid cooling system and a dual paper element air cleaner to maintain performance under dusty operating conditions.

Transmission and Drivetrain

The 4253 offers three distinct transmission configurations to suit different operational needs: an 8-speed non-synchronized gear transmission, a 12-speed partially synchronized transmission, and a 12-speed synchronized shuttle. These options allow for precise speed selection during transport or implement work. The drivetrain is available in either two-wheel drive or four-wheel drive configurations, supported by outboard planetary final drives.

Hydraulics and Hitch

The hydraulic system is an open-center design with a pump flow capacity of 10 gpm (37.9 lpm) and a system pressure of 3046 psi (210.0 bar). It supports between two and four valves for implement control. The rear hitch is a Category II type featuring position and draft control, with a lift capacity of 4,339 lbs (1,968 kg) at the ends, which can be optionally increased to 4,984 lbs (2,260 kg).

Operator Environment and Mechanicals

The tractor is equipped with power steering and independent hydraulic wet disc brakes for reliable stopping power and maneuverability. Operator stations are available in a two-post folding ROPS configuration or an optional enclosed cab with air conditioning. The electrical system is powered by a 12-volt setup with dual batteries to ensure consistent starting capability.

Conclusion

The Massey Ferguson 4253 is a versatile utility tractor suited for varied farming operations requiring mid-range power. With its robust Perkins engine, multiple transmission choices, and flexible hydraulic configuration, it remains a capable workhorse for general field and utility work.

Production Information of Massey Ferguson, 4253

  • Original price was $32,400 in 1999
  • Utility tractor
  • Built in Coventry, England
ManufacturerMassey Ferguson

Dimension and Tires Information of Massey Ferguson, 4253

  • Flange rear axle
2WD Front tread57 to 77 inches [144 to 195 cm]
Wheelbase93 inches [236 cm]
Ground clearance14 inches [35 cm]
Width79 inches (min) [200 cm]
2WD Length159 inches [403 cm]
Front axle2WD Wide Row-Crop
Front axle2WD
4WD Length160 inches [406 cm]
Rear tread60 to 84 inches [152 to 213 cm]
4WD Front tread55 to 75 inches [139 to 190 cm]
Front axle4WD
Front axle2WD LoProfile
Ag front7.5L-15
Ag rear18.4-30

Engine Specifications of Massey Ferguson, 4253

  • Perkins 1004.4TW
  • Liquid-cooled
  • Turbocharged diesel
  • 4-cylinder
Coolant capacity18.5 qts [17.5 L]
Air cleanerDual paper elements
Compression17.3:1
Torque276 lb-ft [374.3 Nm]
Rated RPM2200
Displacement243.5 ci [4.0 L]
Power (net)95 hp [70.8 kW]
Bore/Stroke3.937x5.00 inches [100 x 127 mm]
Oil capacity6.9 qts [6.5 L]
Starter volts12
Torque RPM1500

Transmission Information of Massey Ferguson, 4253

Transmission variants 1

  • Standard transmission on the ROPS-equipped 4233.
TypeNonsynchronized gear
Gears8 forward and 2 reverse
ClutchDry disc

Transmission variants 2

  • Three gears (1-3) plus reverse in two ranges (low/high) two a two-speed synchronized hi-lo shift for each gear. Standard transmission on the cab-equipped 4233.
TypePartially synchronized
Gears12 forward and 4 reverse
ClutchDry disc

Transmission variants 3

TypeSynchronized shuttle
Gears12 forward and reverse
ClutchDry disc
  • 8-speed nonsynchronized gear
  • 12-speed partially synchronized
  • 12-speed synchronized shuttle

Mechanical Specs of Massey Ferguson, 4253

  • Two- or four-wheel drive
  • Two-post folding ROPS. Cab optional with air-conditioning.
  • Independent hydraulic wet disc brakes
  • Power steering
Final drivesOutboard planetary

Power Information of Massey Ferguson, 4253

Rear PTOIndependent
Rear PTO(optional)1000@2000
Engine RPM540@1902
ClutchHydraulic wet disc
Rear PTO Type540/1000 (1.375)

Hydraulics Specifications of Massey Ferguson, 4253

TypeOpen center
Pump flow10 gpm [37.9 lpm]
Valves2 to 4
Capacity13.2 gal [50.0 L]
Pressure3046 psi [210.0 bar]

Three-Point Hitch of Massey Ferguson, 4253

Rear TypeII
Rear Type(optional)4984 lbs [2260 kg]
ControlPosition and draft control
Rear lift (at ends)4339 lbs [1968 kg]

Electrical System of Massey Ferguson, 4253

Battery volts12
GroundNegative
Batteries2
Cab Charging amps70
Charging systemAlternator
Battery CCA590
ROPS Charging amps45

Where it sits

With 95 HP, the Massey Ferguson 4253 sits just above 4245 (85 HP) in Massey Ferguson's range. Its power puts it in the 65th percentile of 1990s models in our database (2097 machines).

Frequently asked questions

How much horsepower does the Massey Ferguson 4253 have?

The Massey Ferguson 4253 delivers 95 HP.

What years was the Massey Ferguson 4253 produced?

The Massey Ferguson 4253 was produced in 1997-1999.

What engine does the Massey Ferguson 4253 have?

The Massey Ferguson 4253 is powered by a Turbocharged diesel, 4-cylinder engine.

What transmission does the Massey Ferguson 4253 use?

The Massey Ferguson 4253 uses a Nonsynchronized gear transmission.

Is the Massey Ferguson 4253 4WD?

The Massey Ferguson 4253 is available in 2WD/4WD.

Compare the Massey Ferguson 4253 with another model