Introduction
Production Information of Massey Ferguson, 435
The production information of the tractor (435) includes details about its manufacturing.
| Utility tractor |
| Built in Canoas, Brazil |
| Manufacturer | Massey Ferguson |
|---|
Dimension and Tires Information of Massey Ferguson, 435
This section sums up the dimension and tires information of the tractor.
| 2WD Shipping weight | 5,710 lbs [2590 kg] |
|---|---|
| 2WD Wheelbase | 84.3 inches [214 cm] |
| Height (ROPS) | 101.6 inches [258 cm] |
| 4WD Length | 162.6 inches [413 cm] |
| 4WD Wheelbase | 93.3 inches [236 cm] |
| 4WD Shipping weight | 6,327 lbs [2869 kg] |
| Height (exhaust) | 96.1 inches [244 cm] |
| 2WD Length | 156.7 inches [398 cm] |
| Standard tires (ag) | Front: 7.50-16. Rear: 18.4-30 (2WD) |
|---|---|
| Front: 12.4-24. Rear: 18.4-30 (4WD) |
Engine Specifications of Massey Ferguson, 435
Get the specifications for the engine and if different options are available.
| Perkins P4000 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Torque RPM | 1400 |
|---|---|
| Displacement | 244.1 ci [4.0 L] |
| Fuel system | Direct injection |
| Bore/Stroke | 3.937x5.00 inches [100 x 127 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque | 196.9 lb-ft [267.0 Nm] |
| Rated RPM | 2200 |
| Power | 72 hp [53.7 kW] |
Transmission Information of Massey Ferguson, 435Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Sliding spur gear |
|---|---|
| Gears | 8 forward and 2 reverse |
Transmission variants 2
| Type | Synchromesh |
|---|---|
| Gears | 12 forward and 4 reverse |
| 8-speed sliding spur gear |
| 12-speed synchromesh |
Mechanical Specs of Massey Ferguson, 435Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Open operator station. Two-post ROPS optional with available canopy. |
| Wet disc brakes |
| Drive | 4x2 2WD |
|---|---|
| 4x4 MFWD 4WD (optional) | |
| Steering | Hydrostatic power |
Power Information of Massey Ferguson, 435Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live |
|---|---|
| Engine RPM | 540@1900 |
| Independent (optional) | |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Massey Ferguson, 435
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2466 psi [170.0 bar] |
|---|---|
| Pump flow | 11.1 gpm [42.0 lpm] |
Three-Point Hitch of Massey Ferguson, 435
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Draft, position, and response control |
Electrical System of Massey Ferguson, 435
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Massey Ferguson 435 have?
The Massey Ferguson 435 delivers 72 HP.
What years was the Massey Ferguson 435 produced?
The Massey Ferguson 435 was produced in 2001-2010.
What engine does the Massey Ferguson 435 have?
The Massey Ferguson 435 is powered by a Diesel, 4-cylinder engine.
What transmission does the Massey Ferguson 435 use?
The Massey Ferguson 435 uses a Sliding spur gear transmission.
How much does the Massey Ferguson 435 weigh?
The Massey Ferguson 435 weighs 5,710 lbs [2590 kg].
Is the Massey Ferguson 435 4WD?
The Massey Ferguson 435 is available in 2WD/4WD.