Introduction
Production Information of Massey Ferguson, 492
The production information of the tractor (492) includes details about its manufacturing.
| Utility tractor |
| Built in Brazil |
| Manufacturer | Massey Ferguson (a part of AGCO) |
|---|
Dimension and Tires Information of Massey Ferguson, 492
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 93 inches [236 cm] |
|---|---|
| Clearance (drawbar) | 14.7 inches [37 cm] |
| Length | 155 inches [393 cm] |
| Width | 80 inches [203 cm] |
| Ag front | 14.9-24 |
|---|---|
| Ag rear | 18.4-34 |
Engine Specifications of Massey Ferguson, 492
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 4-cylinder |
| Image courtesy of Damon McGaha |
| Power (gross) | 99 hp [73.8 kW] |
|---|---|
| Rated RPM | 2200 |
| Displacement | 268.6 ci [4.4 L] |
| Bore/Stroke | 4.134x5.00 inches [105 x 127 mm] |
| Emissions | Tier II |
| Compression | 18.2:1 |
| Air cleaner | Dual paper elements |
| Starter volts | 12 |
| Torque RPM | 1300 |
| Torque | 293 lb-ft [397.3 Nm] |
Transmission Information of Massey Ferguson, 492Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3) plus reverse (R) with low/high ranges and an additional synchronized slow/fast range lever. Synchronized shifting between gears 2-3 and the slow/fast range. |
| Type | Partially synchronized |
|---|---|
| Gears | 12 forward and 4 reverse |
| Clutch | 330mm dry disc |
Mechanical Specs of Massey Ferguson, 492Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Flat-deck platform with two-post folding ROPS. Optional cab with air-conditioning. |
| Independent hydraulic wet disc brakes |
| Power steering |
| Final drives | Planetary |
|---|
Power Information of Massey Ferguson, 492Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@1900 | |
| Engine RPM | 540@1900 |
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of Massey Ferguson, 492
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 8.0 gpm [30.3 lpm] |
|---|---|
| Type | Open center |
| SCV flow | 17 gpm [64.3 lpm] |
| 10 gpm (aux) [37.9 lpm] | |
| Valves | 2 or 3 |
| Total flow | 25 gpm [94.6 lpm] |
| Pump flow | 7.0 gpm (3-point) [26.5 lpm] |
Three-Point Hitch of Massey Ferguson, 492
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position control and top-link draft sensing |
| Rear lift (at 24"/610mm) | 4199 lbs [1904 kg] |
Electrical System of Massey Ferguson, 492
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Massey Ferguson 492 have?
The Massey Ferguson 492 delivers 99 HP.
What years was the Massey Ferguson 492 produced?
The Massey Ferguson 492 was produced in 2004-2006.
What engine does the Massey Ferguson 492 have?
The Massey Ferguson 492 is powered by a 4-cylinder engine.
What transmission does the Massey Ferguson 492 use?
The Massey Ferguson 492 uses a Partially synchronized transmission.
Is the Massey Ferguson 492 4WD?
The Massey Ferguson 492 is available in 2WD/4WD.