Massey Ferguson 5610
Power
100 hp
Production
2013-2017
Engine
Turbocharged intercooled diesel, 3-cylinder 12-valve
Transmission
Dyna-4
Drive
2WD/4WD
From the same series:
Introduction
Massey Ferguson 5610 Utility Tractor
The Massey Ferguson 5610 is a utility tractor produced between 2013 and 2017. Designed as a versatile machine for agricultural operations, it belongs to the Massey Ferguson 5600 series and offers a balance of power and maneuverability for various field and farmstead tasks.
Engine and Performance
The tractor is powered by an AGCO Power 33 AWI 3-cylinder diesel engine with a displacement of 3.3 liters. This liquid-cooled engine features a high-pressure common rail direct injection system and is turbocharged with an intercooler to optimize combustion. It delivers a maximum power of 100 hp (74.6 kW) and provides a torque of 304 lb-ft at 1600 RPM. Emission control is managed via external exhaust gas recirculation (EGR) and a diesel oxidation catalyst (DOC), meeting Interim Tier IV standards.
Transmission and Drivetrain
The 5610 utilizes the Dyna-4 transmission, a four-speed powershift system with a power shuttle that provides 16 forward and 16 reverse gears. An optional creeper configuration is available, extending the range to 32 forward and 32 reverse gears. The transmission utilizes a wet disc clutch and electro-hydraulic operation to ensure smooth gear transitions. Final drives feature internal planetary gears, and the tractor is available in both two-wheel and four-wheel drive configurations with a fully locking electro-hydraulic differential.
Hydraulics and PTO
The hydraulic system is an open-center design with a pump flow capacity of 15 gpm (56.8 lpm), which can be upgraded with a 26 gpm (98.4 lpm) Twin Flow system. The hydraulic pressure is rated at 2900 psi (200 bar), supporting 2 to 4 valves for implement operation. The independent rear PTO offers multiple speeds, including 540, 540E, and 1000 RPM, controlled by an electro-hydraulic clutch.
Hitch and Dimensions
Equipped with a Category II rear hitch, the tractor provides an electronic lower link draft control system. The rear lift capacity at the ends is 9,480 lbs (4,300 kg), with a capacity of 7,100 lbs (3,220 kg) measured at 24 inches behind the lift point. An optional front hitch is available with a lift capacity of 5,500 lbs (2,494 kg). The machine has a wheelbase of 97.1 inches and a total length of 167.5 inches.
Conclusion
The Massey Ferguson 5610 is a capable utility tractor suited for a wide range of agricultural applications. Its combination of a high-torque 3-cylinder engine, flexible transmission options, and substantial hydraulic capacity makes it a reliable choice for farmers requiring a dependable machine for daily field and utility work.
Production Information of Massey Ferguson, 5610
- Utility tractor
- Original price was $77,499 in 2014
| Manufacturer | Massey Ferguson (a part of AGCO) |
|---|
Dimension and Tires Information of Massey Ferguson, 5610
- Flange rear axle
| Wheelbase | 97.1 inches [246 cm] |
|---|---|
| Ground clearance | 17.6 inches [44 cm] |
| Height (cab) | 111.3 inches [282 cm] |
| Length | 167.5 inches [425 cm] |
| Width | 79.3 inches (min) [201 cm] |
| Ag rear | 16.9R38 |
|---|
Engine Specifications of Massey Ferguson, 5610
- AGCO Power 33 AWI
- Liquid-cooled
- Turbocharged intercooled diesel
- 3-cylinder 12-valve
| Torque | 304 lb-ft [412.2 Nm] |
|---|---|
| Idle RPM | 850-2402 |
| Oil capacity | 13.7 qts [13.0 L] |
| Emission control | External exhaust gas recirculation with diesel oxidation catalyst (DOC) (EGR) |
| Torque RPM | 1600 |
| Coolant capacity | 15.3 qts [14.5 L] |
| Maximum Power | 105 hp [78.3 kW] |
| Fuel system | High pressure common rail direct injection |
| Power | 100 hp [74.6 kW] |
| Displacement | 201 ci [3.3 L] |
| Emissions | Interim Tier IV |
| Bore/Stroke | 4.25x4.72 inches [108 x 120 mm] |
| Rated RPM | 2200 |
| Starter | Electric |
| Starter volts | 12 |
| Pre-heating | Intake heater |
| Air cleaner | Dual stage dry |
Transmission Information of Massey Ferguson, 5610
Transmission variants 1
| Transmission | Dyna-4 |
|---|---|
| Oil capacity | 68.7 qts [65.0 L] |
| Clutch | Wet disc |
| Type | Four-speed power shift with power shuttle |
| Gears | 16 forward and reverse |
Transmission variants 2
| Type | Creeper |
|---|---|
| Gears | 32 forward and reverse |
- 16-speed four-speed power shift with power shuttle
- 32-speed creeper
Mechanical Specs of Massey Ferguson, 5610
- Two- or four-wheel drive
- Hydraulic wet disc brakes
- Cab standard with air-conditioning. Optional mechanical cab suspension. AGCOMMAND (optional)
| Steering | Hydrostatic power |
|---|---|
| Final drives | Internal planetary |
| Trailer brakes | Pneumatic (optional) |
| Differential lock | Full locking electro-hydraulic |
Power Information of Massey Ferguson, 5610
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@1920 |
| Engine RPM(optional) | 540/540E/1000 (1.375) |
| Clutch | Electro-hydraulic |
| Clutch(optional) | 540E@1964 |
| Rear PTO Type | 540/540E (1.375) |
Hydraulics Specifications of Massey Ferguson, 5610
| Type | Open center |
|---|---|
| Type(optional) | 26 gpm (Twin Flow) [98.4 lpm] |
| Pump flow | 15 gpm [56.8 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| Valves | 2 to 4 |
Three-Point Hitch of Massey Ferguson, 5610
| Rear Type | II |
|---|---|
| Front Hitch | II (optional) |
| Rear lift (at 24"/610mm) | 7100 lbs [3220 kg] |
| Control | Electronic lower link draft control |
| Front lift (at ends) | 5500 lbs [2494 kg] |
| Rear lift (at ends) | 9480 lbs [4300 kg] |
Electrical System of Massey Ferguson, 5610
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 95 |
Where it sits
With 100 HP, the Massey Ferguson 5610 sits between 5609 (90 HP) and 5450 (103 HP) in Massey Ferguson's range. Its power puts it in the 60th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the Massey Ferguson 5610 have?
The Massey Ferguson 5610 delivers 100 HP.
What years was the Massey Ferguson 5610 produced?
The Massey Ferguson 5610 was produced in 2013-2017.
What engine does the Massey Ferguson 5610 have?
The Massey Ferguson 5610 is powered by a Turbocharged intercooled diesel, 3-cylinder 12-valve engine.
What transmission does the Massey Ferguson 5610 use?
The Massey Ferguson 5610 uses a Dyna-4 transmission.
Is the Massey Ferguson 5610 4WD?
The Massey Ferguson 5610 is available in 2WD/4WD.