Introduction
Production Information of Massey Ferguson, 595
The production information of the tractor (595) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Beauvais, France |
| Manufacturer | Massey Ferguson |
|---|
Dimension and Tires Information of Massey Ferguson, 595
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 104.3 inches (2WD) [264 cm] |
|---|---|
| Weight | 9,040 lbs (2WD) [4100 kg] |
| Height (cab) | 103.5 inches [262 cm] |
| 102.4 inches (4WD) [260 cm] | |
| 9,900 lbs (4WD) [4490 kg] | |
| Length | 175.6 inches [446 cm] |
| Standard tires (ag) | Front: 11.00-16. Rear: 16.9-38 (2WD) |
|---|---|
| Front: 12.4-28. Rear: 16.9-38 (4WD) |
Engine Specifications of Massey Ferguson, 595
Get the specifications for the engine and if different options are available.
| Perkins A4.318 |
| By 1980, Massey Ferguson model 595 tractors sold in certain markets were equipped with turbochargers. |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Torque RPM | 1300 |
|---|---|
| Power | 86.8 hp [64.7 kW] |
| Displacement | 318 ci [5.2 L] |
| Starter volts | 12 |
| Torque | 253 lb-ft [343.1 Nm] |
| Rated RPM | 2000 |
| Bore/Stroke | 4.50x5.00 inches [114 x 127 mm] |
Transmission Information of Massey Ferguson, 595Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Multi-Power |
|---|---|
| Clutch | 305mm dry disc |
| Type | Partial power shift |
| Gears | 12 forward and 4 reverse |
Transmission variants 2
| Gears | 8 forward and 2 reverse |
|---|
| 12-speed partial power shift |
| 8-speed |
Mechanical Specs of Massey Ferguson, 595Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Cab standard. |
| Wet disc brakes |
| Final drives | Outboard planetary |
|---|---|
| Steering | Hydrostatic power |
Power Information of Massey Ferguson, 595Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@1750 |
| 1000 (1.375) | |
| Clutch | Hydraulic wet disc |
| 1000@2000 | |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Massey Ferguson, 595
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pressure | 2400 psi [165.5 bar] |
| Pump flow | 6.7 gpm [25.4 lpm] |
Three-Point Hitch of Massey Ferguson, 595
Hitch category and rear/front lift capacity.
| Rear Type | 2 |
|---|---|
| Control | Position and draft control with top-link sensing |
| Rear lift | 5,400 lbs [2449 kg] |
Frequently asked questions
How much horsepower does the Massey Ferguson 595 have?
The Massey Ferguson 595 delivers 86 HP.
What years was the Massey Ferguson 595 produced?
The Massey Ferguson 595 was produced in 1974-1982.
What engine does the Massey Ferguson 595 have?
The Massey Ferguson 595 is powered by a Diesel, 4-cylinder engine.
What transmission does the Massey Ferguson 595 use?
The Massey Ferguson 595 uses a Multi-Power transmission.
How much does the Massey Ferguson 595 weigh?
The Massey Ferguson 595 weighs 9,040 lbs (2WD) [4100 kg].
Is the Massey Ferguson 595 4WD?
The Massey Ferguson 595 is available in 2WD/4WD.