Massey Ferguson 8737
Power
340 hp
Production
2014-2017
Engine
Turbocharged with air-to-air intercooler diesel, 6-cylinder 24-valve
Transmission
Dyna-VT
Weight
23810 lbs [10800 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Massey Ferguson, 8737
The production information of the tractor (8737) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Jackson, Minnesota, USA |
| Manufacturer | Massey Ferguson (a part of AGCO) |
|---|
Dimension and Tires Information of Massey Ferguson, 8737
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 122 inches [309 cm] |
|---|---|
| Bar rear axle | 4.33 by 105 inches [109 by 2667 mm] |
| Shipping weight | 23810 lbs [10800 kg] |
| Length | 218.6 inches [555 cm] |
| Bar rear axle | 4.33 by 118 inches [109 by 2997 mm] |
| Height (cab) | 141 inches [358 cm] |
No data available
Engine Specifications of Massey Ferguson, 8737
Get the specifications for the engine and if different options are available.
| AGCO POWER |
| Liquid-cooled |
| Turbocharged with air-to-air intercooler diesel |
| 6-cylinder 24-valve |
| Rated RPM | 2100 |
|---|---|
| Displacement | 512.6 ci [8.4 L] |
| Emission control | Selective catalytic reduction (SCR) |
| Bore/Stroke | 4.37x5.71 inches [111 x 145 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Maximum Power | 370 hp [275.9 kW] |
| Power | 340 hp [253.5 kW] |
| Emissions | Tier IV |
Transmission Information of Massey Ferguson, 8737Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Dyna-VT |
|---|---|
| Type | Continuously variable transmission (CVT) |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Massey Ferguson, 8737Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. Optional OptiRide Plus hydraulic cab suspension. AgCommand ready; AUTO-GUIDE 3000 |
| Hydraulic wet disc brakes |
| Power steering |
| Differential lock | Electro-hydraulic |
|---|
Power Information of Massey Ferguson, 8737Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000/1000E (1.75) |
Hydraulics Specifications of Massey Ferguson, 8737
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center load sensing (CCLS) |
|---|---|
| Pump flow | 54 gpm [204.4 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| Valves | 4 to 6 |
Three-Point Hitch of Massey Ferguson, 8737
Hitch category and rear/front lift capacity.
| Rear Type | III/IVN |
|---|---|
| Cat 4 (optional) | |
| Cat 3 Heavy Duty (optional) | |
| Rear lift (at ends) | 26455 lbs [11999 kg] |
| Drawbar | Cat. 3 |
Electrical System of Massey Ferguson, 8737
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging volts | 12 |
| Charging system | Alternator |
| Charging amps | 240 (twin 120A) |
Frequently asked questions
How much horsepower does the Massey Ferguson 8737 have?
The Massey Ferguson 8737 delivers 340 HP.
What years was the Massey Ferguson 8737 produced?
The Massey Ferguson 8737 was produced in 2014-2017.
What engine does the Massey Ferguson 8737 have?
The Massey Ferguson 8737 is powered by a Turbocharged with air-to-air intercooler diesel, 6-cylinder 24-valve engine.
What transmission does the Massey Ferguson 8737 use?
The Massey Ferguson 8737 uses a Dyna-VT transmission.
How much does the Massey Ferguson 8737 weigh?
The Massey Ferguson 8737 weighs 23810 lbs [10800 kg].
Is the Massey Ferguson 8737 4WD?
The Massey Ferguson 8737 is available in 4WD.