Introduction
Production Information of McCormick Intl, MC80
The production information of the tractor (MC80) includes details about its manufacturing.
| Utility tractor |
| Built in Doncaster, England |
| Manufacturer | McCormick Intl (a part of Argo) |
|---|
Dimension and Tires Information of McCormick Intl, MC80
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 94.5 inches [240 cm] |
|---|---|
| Ground clearance | 11.6 inches [29 cm] |
| Height (cab) | 107.9 inches [274 cm] |
| Length | 174.5 inches [443 cm] |
| Width | 84.6 inches [214 cm] |
| Ag front | 12.4R24 |
|---|---|
| Ag rear | 16.9R38 |
Engine Specifications of McCormick Intl, MC80
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Turbocharged diesel |
| 4-cylinder |
| Torque RPM | 1400 |
|---|---|
| Displacement | 244 ci [4.0 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 3.937x5.00 inches [100 x 127 mm] |
| Oil change | 250 h |
| Starter volts | 12 |
| Torque | 252 lb-ft [341.7 Nm] |
| Operating RPM | 2000-2200 |
| Power | 84 hp [62.6 kW] |
Transmission Information of McCormick Intl, MC80Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four power shift gears in three ranges with power shuttle. |
| Type | Partial power shift |
|---|---|
| Gears | 16 forward and 12 reverse |
Transmission variants 2
| Type | Partial power shift with creeper |
|---|---|
| Gears | 32 forward and 24 reverse |
| 16-speed partial power shift |
| 32-speed partial power shift with creeper |
Mechanical Specs of McCormick Intl, MC80Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. Cab available with air-conditioning. |
| Power steering |
| Differential lock | Wet disc |
|---|
Power Information of McCormick Intl, MC80Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2200 | |
| Engine RPM | 540@1877 |
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of McCormick Intl, MC80
Hydraulic system type, pressure, pump flow and valves.
| Type | Axial piston pump |
|---|---|
| Pump flow | 28.8 gpm [109.0 lpm] |
| SCV flow | 25.1 gpm [95.0 lpm] |
Three-Point Hitch of McCormick Intl, MC80
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Electronic lower lift |
| Rear lift (at 24"/610mm) | 8201 lbs [3719 kg] |
Electrical System of McCormick Intl, MC80
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 95 |
Frequently asked questions
How much horsepower does the McCormick Intl MC80 have?
The McCormick Intl MC80 delivers 84 HP.
What years was the McCormick Intl MC80 produced?
The McCormick Intl MC80 was produced in 2000-2003.
What engine does the McCormick Intl MC80 have?
The McCormick Intl MC80 is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the McCormick Intl MC80 use?
The McCormick Intl MC80 uses a Partial power shift transmission.
Is the McCormick Intl MC80 4WD?
The McCormick Intl MC80 is available in 4WD.