New Holland 9682 tractor

New Holland 9682

Power

360 hp

Production

1996-2000

Transmission

Quadra-Sync

Drive

4WD

From the same series:

9482
9882

Introduction

Production Information of New Holland, 9682

The production information of the tractor (9682) includes details about its manufacturing.

Built in Winnipeg, Manitoba, Canada
Four-wheel Drive (4WD) tractor
DistributorNew Holland
ManufacturerVersatile

Dimension and Tires Information of New Holland, 9682

This section sums up the dimension and tires information of the tractor.

Wheelbase133 inches [337 cm]
Height (exhaust)146.5 inches [372 cm]
Height (cab)136.9 inches [347 cm]
Length266 inches [675 cm]
Width150.2 inches (20.8R42 duals) [381 cm]
Ag front20.8R42
Ag rear20.8R42

Engine Specifications of New Holland, 9682

Get the specifications for the engine and if different options are available.

Liquid-cooled vertical
Coolant capacity62.4 qts [59.1 L]
Starter volts12
Air cleanerDual paper elements
Oil change250 h
Idle RPM900-2400
Rated RPM2100
Displacement855 ci [14.0 L]
Oil capacity40.8 qts [38.6 L]
Power360 hp [268.5 kW]
Compression18.5:1
Bore/Stroke5.50x6.00 inches [140 x 152 mm]
Firing order1-5-3-6-2-4
Torque RPM1400
Torque1215 lb-ft [1647.5 Nm]

Transmission Information of New Holland, 9682Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four speeds (1-4) in three ranges (L/M/H) plus reverse range. Speed changes are synchronized using the clutch. Tractor must be stopped to shift ranges. Depressing the clutch fully activates a transmission brake, it is recommended to depress it two-thirds when shifting gears.
TransmissionQuadra-Sync
Clutch11-inch hydraulic wet disc
TypePartially synchronized
Gears12 forward and 4 reverse

Transmission variants 2

Power shift transmission operated with a single control lever. Lever is moved ahead for forward range and to the back for reverse range, the neutral-lock button must be pressed to move the lever into range. Pushing right up-shifts and left down-shifts. Transmission always begins in first gear. Pressing the clutch while in motion will cause the transmission to automatically down-shift to match ground speed.
TransmissionPower Shift
Clutch9-inch hydraulic
TypeFull power shift
Gears12 forward and 2 reverse
12-speed partially synchronized
12-speed full power shift

Mechanical Specs of New Holland, 9682Y

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Cab standard with air-conditioning.
Hydraulic dry disc brakes
SteeringHydrostaic power

Power Information of New Holland, 9682Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent (optional)
Engine RPM1000@2100
ClutchElectro-hydraulic wet disc
Rear PTO Type1000 (1.75)

Hydraulics Specifications of New Holland, 9682

Hydraulic system type, pressure, pump flow and valves.

SCV flow30 gpm [113.6 lpm]
TypeClosed center load sensing
Valves1 to 4
Pressure2250 psi [155.1 bar]
Capacity31 gal [117.3 L]
Steering flow30 gpm [113.6 lpm]
Pump flow50 gpm [189.2 lpm]
33 gal (with 3-point) [124.9 L]
Steering press.2500 psi [172.4 bar]

Three-Point Hitch of New Holland, 9682

Hitch category and rear/front lift capacity.

Rear TypeIVN/3 (optional)
Rear lift (at 24"/610mm)13,000 lbs [5896 kg]

Electrical System of New Holland, 9682

Battery voltage, charging system and ground.

Battery volts12
GroundNegative
Batteries3
Charging volts12
Charging systemAlternator
Battery GroupSAE31
Battery CCA950
Charging amps130

Frequently asked questions

How much horsepower does the New Holland 9682 have?

The New Holland 9682 delivers 360 HP.

What years was the New Holland 9682 produced?

The New Holland 9682 was produced in 1996-2000.

What transmission does the New Holland 9682 use?

The New Holland 9682 uses a Quadra-Sync transmission.

Is the New Holland 9682 4WD?

The New Holland 9682 is available in 4WD.

Compare the New Holland 9682 with another model