Introduction
Production Information of New Holland, TN95A
The production information of the tractor (TN95A) includes details about its manufacturing.
| Utility tractor |
| Built in Jesi, Italy |
| Manufacturer | New Holland |
|---|
Dimension and Tires Information of New Holland, TN95A
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 83.7 inches [212 cm] |
|---|---|
| Height (Folded ROPS) | 75.1 inches [190 cm] |
| Height (ROPS) | 95.1 inches [241 cm] |
| Length | 157.5 inches [400 cm] |
| Shipping weight | 6118 lbs [2775 kg] |
| Width | 67.2 inches [170 cm] |
No data available
Engine Specifications of New Holland, TN95A
Get the specifications for the engine and if different options are available.
| Iveco |
| Liquid-cooled |
| 4-cylinder |
| Turbocharged diesel |
| Starter volts | 12 |
|---|---|
| Starter | Electric |
| Power (gross) | 90 hp [67.1 kW] |
| Compression | 17.5:1 |
| Air cleaner | Dual paper elements |
| Displacement | 274 ci [4.5 L] |
| Emissions | Tier 2 |
| Fuel use | 5.20 gal/hour [19.7 l/hour] |
| Bore/Stroke | 4.094x5.197 inches [104 x 132 mm] |
| Torque RPM | 1400 |
| Torque | 269 lb-ft [364.8 Nm] |
| Rated RPM | 2300 |
Transmission Information of New Holland, TN95AY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Left-hand clutchless power shuttle |
| Transmission | Synchro Command |
|---|---|
| Clutch | Six 113mm wet organic plates |
| Type | Partially synchronized with power shuttle |
| Gears | 12 forward and reverse |
Mechanical Specs of New Holland, TN95AY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| ROPS. Canopy optional |
| Differential wet disc brakes |
| Differential lock | Mechanical rear |
|---|---|
| Steering | Hydrostatic power |
Power Information of New Holland, TN95AY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of New Holland, TN95A
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 9.4 gpm [35.6 lpm] |
| Pump flow | 15 gpm [56.8 lpm] |
| Pressure | 2755 psi [190.0 bar] |
| Valves | 1 to 4 |
Three-Point Hitch of New Holland, TN95A
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Rear lift (at 24"/610mm) | 3960 lbs [1796 kg] |
Electrical System of New Holland, TN95A
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 730 |
| Charging system | Alternator |
| Charging amps | 65 |
Frequently asked questions
How much horsepower does the New Holland TN95A have?
The New Holland TN95A delivers 90 HP.
What years was the New Holland TN95A produced?
The New Holland TN95A was produced in 2004-2008.
What engine does the New Holland TN95A have?
The New Holland TN95A is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the New Holland TN95A use?
The New Holland TN95A uses a Synchro Command transmission.
How much does the New Holland TN95A weigh?
The New Holland TN95A weighs 6118 lbs [2775 kg].
Is the New Holland TN95A 4WD?
The New Holland TN95A is available in 4WD.