Introduction
Production Information of New Holland, Workmaster 40
The production information of the tractor (Workmaster 40) includes details about its manufacturing.
| Compact Utility tractor |
| Manufacturer | New Holland (a part of CNH) |
|---|---|
| $22,187 (2017 hydro ) | |
| Original price | $20,554 (2017 shuttle ) |
Dimension and Tires Information of New Holland, Workmaster 40
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Front tread | 45.6 inches [115 cm] |
|---|---|
| Wheelbase | 67.5 inches [171 cm] |
| Weight | 3067 lbs [1391 kg] |
| Height (ROPS) | 87.7 inches [222 cm] |
| Length | 121 inches [307 cm] |
| Rear tread | 50.5 inches [128 cm] |
| Width | 66.5 inches [168 cm] |
| Standard tires (ag) | Front: 7x14. Rear: 11.2x24 |
|---|---|
| Industrial rear | 43x16.00-20 |
| Industrial front | 25x8.5-14 |
| Lawn/turf front | 25x8.50-14 |
| Lawn/turf rear | 41x14.00-20 |
Engine Specifications of New Holland, Workmaster 40
Get the specifications for the engine and if different options are available.
| LS Mitron L3C19-T |
| Liquid-cooled |
| 3-cylinder |
| Turbocharged diesel |
| Emission control | Exhaust gas recirculation with particulate catalyst |
|---|---|
| Pre-heating | Glow plugs |
| Displacement | 114.7 ci [1.9 L] |
| Bore/Stroke | 3.465x4.055 inches [88 x 103 mm] |
| Emissions | Tier IV |
| Fuel system | Electronic common rail direct injection |
| Power | 40 hp [29.8 kW] |
| Starter volts | 12 |
| Starter | Electric |
| Rated RPM | 2600 |
Transmission Information of New Holland, Workmaster 40Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in three ranges with mechanical shuttle |
| Type | Synchronized shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| 12-speed synchronized shuttle |
| Hydrostatic |
Mechanical Specs of New Holland, Workmaster 40Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of New Holland, Workmaster 40Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of New Holland, Workmaster 40
Hydraulic system type, pressure, pump flow and valves.
| Hydro Steering flow | 5.3 gpm [20.1 lpm] |
|---|---|
| Type | Open center |
| Hydro Total flow | 13.5 gpm [51.1 lpm] |
| Gear Total flow | 12.4 gpm [46.9 lpm] |
| Valves | 1 or 2 |
| Gear Steering flow | 4.2 gpm [15.9 lpm] |
| Pump flow | 8.2 gpm [31.0 lpm] |
Three-Point Hitch of New Holland, Workmaster 40
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1433 lbs [650 kg] |
| Control | Position control |
| Rear lift (at ends) | 1808 lbs [820 kg] |
Electrical System of New Holland, Workmaster 40
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 70 |
Frequently asked questions
How much horsepower does the New Holland Workmaster 40 have?
The New Holland Workmaster 40 delivers 40 HP.
What years was the New Holland Workmaster 40 produced?
The New Holland Workmaster 40 was produced in 2017+.
What engine does the New Holland Workmaster 40 have?
The New Holland Workmaster 40 is powered by a Turbocharged diesel, 3-cylinder engine.
What transmission does the New Holland Workmaster 40 use?
The New Holland Workmaster 40 uses a Synchronized shuttle transmission.
How much does the New Holland Workmaster 40 weigh?
The New Holland Workmaster 40 weighs 3067 lbs [1391 kg].
Is the New Holland Workmaster 40 4WD?
The New Holland Workmaster 40 is available in 4WD.