Introduction
New Holland Workmaster 50 Utility Tractor
The New Holland Workmaster 50 is a utility tractor produced between 2015 and 2025. It is designed to serve as a versatile machine for general agricultural operations, falling within the New Holland Workmaster series segment.
Engine and Performance
The tractor is powered by an FPT R753 3-cylinder turbocharged diesel engine with a displacement of 2.2 liters. It utilizes electronic high-pressure common rail direct injection and features a liquid-cooling system. The engine produces 53 horsepower (39.5 kW) at a rated speed of 2600 RPM and complies with Tier IV emission standards using exhaust gas recirculation and a particulate catalyst.
Transmission and Drivetrain
The machine is equipped with a synchronized shuttle transmission providing 8 forward and 8 reverse gears, operated via a mechanical clutch. It is available in both two-wheel drive and four-wheel drive configurations. Maneuverability is supported by power steering, while braking is provided by wet disc brakes.
Hydraulics and Hitch
The hydraulic system is an open-center type delivering a total flow of 17.5 gpm (66.2 lpm) with a dedicated pump flow of 12 gpm (45.4 lpm) for implements. It features one or two remote valves. The rear hitch is a Category II/I type, equipped with position and draft control, capable of lifting up to 3,307 lbs (1500 kg) at the ends of the telescoping draft links.
Power Take-Off
The independent rear PTO operates at a standard speed of 540 RPM, with an optional 540/540E configuration available to improve fuel efficiency during light-load operations.
Conclusion
The Workmaster 50 is a utility-focused tractor built for operators requiring a balance of mechanical simplicity and modern engine efficiency. With its mid-range horsepower and flexible hitching capabilities, it is suited for general field work, loader tasks, and implement management on small to medium-sized agricultural holdings.
Production Information of New Holland, Workmaster 50
- Utility tractor
- Original price was $23,658 in 2017
| Manufacturer | New Holland (a part of CNH) |
|---|
Dimension and Tires Information of New Holland, Workmaster 50
- Flange rear axle
| 2WD Weight | 4442 lbs [2014 kg] |
|---|---|
| 2WD Wheelbase | 96.4 inches [244 cm] |
| Width | 77.5 inches [196 cm] |
| 4WD Length | 134 inches [340 cm] |
| 4WD Wheelbase | 97.6 inches [247 cm] |
| 4WD Weight | 5059 lbs [2294 kg] |
| Height (ROPS) | 97.6 inches [247 cm] |
| 2WD Length | 129.5 inches [328 cm] |
| 2WD Standard tires (ag) | Front: 7.5x16. Rear: 13.6x28 |
|---|---|
| Industrial rear | 18.4x24 |
| 4WD Standard tires (ag) | Front: 8.3x24. Rear: 13.6x28 |
| Industrial front | 12.5x18 |
Engine Specifications of New Holland, Workmaster 50
- FPT R753
- Liquid-cooled
- Turbocharged diesel
- 3-cylinder
| Rated RPM | 2600 |
|---|---|
| Displacement | 136 ci [2.2 L] |
| Emission control | Exhaust gas recirculation with particulate catalyst |
| Bore/Stroke | 3.70x4.21 inches [94 x 107 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Fuel system | Electronic high-pressure common rail direct injection |
| Power | 53 hp [39.5 kW] |
| Emissions | Tier IV |
Transmission Information of New Holland, Workmaster 50
Transmission variants 1
| Type | Synchronized shuttle |
|---|---|
| Gears | 8 forward and reverse |
Mechanical Specs of New Holland, Workmaster 50
- Two- or four-wheel drive
- Two-post folding ROPS.
- Power steering
- Wet disc brakes
Power Information of New Holland, Workmaster 50
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 540/540E |
| Clutch | Mechanical |
| Rear PTO Type | 540 |
Hydraulics Specifications of New Holland, Workmaster 50
| Type | Open center |
|---|---|
| Steering flow | 5.5 gpm [20.8 lpm] |
| Total flow | 17.5 gpm [66.2 lpm] |
| Valves | 1 or 2 |
| Pump flow | 12 gpm [45.4 lpm] |
Three-Point Hitch of New Holland, Workmaster 50
| Rear Type | II/I |
|---|---|
| Rear Arms | Telescoping draft links |
| Rear lift (at 24"/610mm) | 2701 lbs [1225 kg] |
| Control | Position and draft control |
| Rear lift (at ends) | 3307 lbs [1500 kg] |
Electrical System of New Holland, Workmaster 50
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 75 |
Where it sits
With 53 HP, the New Holland Workmaster 50 sits between Workmaster 45 (45 HP) and Workmaster 60 (60 HP) in New Holland's range. Its power puts it in the 33th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the New Holland Workmaster 50 have?
The New Holland Workmaster 50 delivers 53 HP.
What years was the New Holland Workmaster 50 produced?
The New Holland Workmaster 50 was produced in 2015-2025.
What engine does the New Holland Workmaster 50 have?
The New Holland Workmaster 50 is powered by a Turbocharged diesel, 3-cylinder engine.
What transmission does the New Holland Workmaster 50 use?
The New Holland Workmaster 50 uses a Synchronized shuttle transmission.
How much does the New Holland Workmaster 50 weigh?
The New Holland Workmaster 50 weighs 4442 lbs [2014 kg].
Is the New Holland Workmaster 50 4WD?
The New Holland Workmaster 50 is available in 2WD/4WD.