Oliver 2155
Power
156 hp[P] hp
Production
1971
Engine
LP gas, 6-cylinder
Transmission
Minneapolis-Moline Ampli-Torc
Weight
12050 lbs [5465 kg]
Drive
2WD
Introduction
Production Information of Oliver, 2155
The production information of the tractor (2155) includes details about its manufacturing.
| Original price was $13,700 in 1971 |
| Row-Crop tractor |
| Built in Minneapolis, Minnesota, USA |
| Manufacturer | Oliver |
|---|
Dimension and Tires Information of Oliver, 2155
This section sums up the dimension and tires information of the tractor.
| Clearance (drawbar) | 19 inches [48 cm] |
|---|---|
| Wheelbase | 104.25 inches [264 cm] |
| Ballasted weight | 20540 lbs [9316 kg] |
| Operating weight | 12050 lbs [5465 kg] |
| Length | 168.5 inches [427 cm] |
| Front tread | 54 inches [137 cm] |
| Clearance (rear axle) | 27 inches [68 cm] |
| Width | 95 inches*Minimum width. [241 cm] |
| Rear tread | 61 to 84 inches [154 to 213 cm] |
| Front tread | 56 to 80 inches [142 to 203 cm] |
| Ag rear | 20.8x38 |
|---|---|
| Ag front | 7.50x18 |
| 11.00Lx15 | |
| 11.00x16 | |
| Ag rear | 18.4x38 |
| 23.1x34 | |
| 14.00Lx16A | |
| Ag front | 7.50x16 |
| 24.5x32 |
Engine Specifications of Oliver, 2155
Get the specifications for the engine and if different options are available.
| Minneapolis-Moline |
| Liquid-cooled |
| LP gas |
| 6-cylinder |
| Air cleaner | Dry element |
|---|---|
| Displacement | 504 ci [8.3 L] |
| Rated RPM | 1800 |
| Bore/Stroke | 4.625x5.00 inches [117 x 127 mm] |
| Starter volts | 12 |
| Starter volts | 12 |
Transmission Information of Oliver, 2155Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Minneapolis-Moline Ampli-Torc |
|---|---|
| Clutch | 355.6mm dry disc |
| Type | Two-speed power shift |
| Gears | 10 forward and 2 reverse |
Mechanical Specs of Oliver, 2155Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. Cab optional with heat and air-conditioning. |
| Dry disc brakes |
| Power steering |
| Final drives | Outboard planetary |
|---|
Power Information of Oliver, 2155Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@1800 |
| 540/1000 (1.375) | |
| Clutch | Wet disc |
| 1000@1800 | |
| Rear PTO Type | 1000 (1.375) |
Hydraulics Specifications of Oliver, 2155
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 20 gpm [75.7 lpm] |
| Valves | 2 or 3 |
| Closed center OptOptional | |
| Pressure | 2000 psi [137.9 bar] |
Three-Point Hitch of Oliver, 2155
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|
Electrical System of Oliver, 2155
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Batteries | 2 |
Frequently asked questions
How much horsepower does the Oliver 2155 have?
The Oliver 2155 delivers 156 hp[P] HP.
What years was the Oliver 2155 produced?
The Oliver 2155 was produced in 1971.
What engine does the Oliver 2155 have?
The Oliver 2155 is powered by a LP gas, 6-cylinder engine.
What transmission does the Oliver 2155 use?
The Oliver 2155 uses a Minneapolis-Moline Ampli-Torc transmission.
How much does the Oliver 2155 weigh?
The Oliver 2155 weighs 12050 lbs [5465 kg].
Is the Oliver 2155 4WD?
The Oliver 2155 is available in 2WD.