Rhino 1210
Power
18 hp
Production
1995-1999
Engine
Diesel, 1-cylinder
Transmission
Gear
Weight
2360 lbs [1070 kg]
Drive
2WD
From the same series:
Introduction
Rhino 1210 Compact Utility Tractor
The Rhino 1210 is a compact utility tractor produced in China between 1995 and 1999. Part of the 1212 series, this machine is designed for small-scale agricultural tasks and general property maintenance.
Engine and Performance
The tractor is powered by a 1-cylinder diesel engine with a displacement of 55 cubic inches (0.9 liters). It produces 18 horsepower (13.4 kW) at a rated engine speed of 2300 RPM. The electrical system utilizes a 12-volt starter.
Transmission and Drivetrain
The Rhino 1210 features a gear-type transmission providing 12 forward speeds and 4 reverse speeds, coupled with a 228.6 mm dry disc clutch. It is configured as a two-wheel-drive unit, equipped with power steering and mechanical drum brakes for operator control.
Hydraulics and PTO
The hydraulic system is of the open-center type, delivering a total pump flow of 6.4 gallons per minute (24.2 liters per minute), with 3.7 gallons per minute dedicated to steering. It features a live rear power take-off (PTO) operating at 540 RPM.
Hitch and Dimensions
Equipped with a Category I rear three-point hitch featuring position control, the tractor has a lift capacity of 1200 lbs (544 kg) measured at 24 inches behind the lift point. The machine has a wheelbase of 50.5 inches (128 cm), a total length of 90 inches (228 cm), and a weight of 2360 lbs (1070 kg). It is fitted with a two-post fixed ROPS for operator protection.
Conclusion
The Rhino 1210 is a straightforward, compact utility tractor suitable for light-duty agricultural applications and maintenance work where maneuverability and reliability are required.
Production Information of Rhino, 1210
- Compact Utility tractor
- Built in China
| Manufacturer | Rhino |
|---|
Dimension and Tires Information of Rhino, 1210
| Wheelbase | 50.5 inches [128 cm] |
|---|---|
| Weight | 2360 lbs [1070 kg] |
| Height (ROPS) | 80.5 inches [204 cm] |
| Length | 90 inches [228 cm] |
| Clearance (front axle) | 10 inches [25 cm] |
| Width | 50.5 inches [128 cm] |
| Standard tires (ag) | Front: 4.0x14. Rear: 8.3x20 |
|---|
Engine Specifications of Rhino, 1210
- Diesel
- 1-cylinder
| Rated RPM | 2300 |
|---|---|
| Power | 18 hp [13.4 kW] |
| Starter volts | 12 |
| Displacement | 55 ci [0.9 L] |
Transmission Information of Rhino, 1210
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 12 forward and 4 reverse |
| Clutch | 228.6mm dry disc |
Mechanical Specs of Rhino, 1210
- Two-wheel drive
- Two-post fixed ROPS.
- Power steering
- Mechanical drum brakes
Power Information of Rhino, 1210
| Rear PTO | Live |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Rhino, 1210
| Type | Open center |
|---|---|
| Pump flow | 6.4 gpm [24.2 lpm] |
| Steering flow | 3.7 gpm [14.0 lpm] |
Three-Point Hitch of Rhino, 1210
| Rear Type | I |
|---|---|
| Control | Position control |
| Rear lift (at 24"/610mm) | 1200 lbs [544 kg] |
Where it sits
Its power puts it in the 5th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the Rhino 1210 have?
The Rhino 1210 delivers 18 HP.
What years was the Rhino 1210 produced?
The Rhino 1210 was produced in 1995-1999.
What engine does the Rhino 1210 have?
The Rhino 1210 is powered by a Diesel, 1-cylinder engine.
What transmission does the Rhino 1210 use?
The Rhino 1210 uses a Gear transmission.
How much does the Rhino 1210 weigh?
The Rhino 1210 weighs 2360 lbs [1070 kg].
Is the Rhino 1210 4WD?
The Rhino 1210 is available in 2WD.