Steiger Panther III PTA-325
Power
325 hp
Production
1980-1982
Engine
Turbocharged diesel, 6-cylinder
Transmission
Allison HT 754
Weight
29605 lbs [13428 kg]
Drive
4WD
Introduction
Production Information of Steiger, Panther III PTA-325
The production information of the tractor (Panther III PTA-325) includes details about its manufacturing.
| Original price was $110,000 in 1982 |
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | Steiger |
|---|
Dimension and Tires Information of Steiger, Panther III PTA-325
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 132.5 inches [336 cm] |
|---|---|
| Shipping weight | 29605 lbs [13428 kg] |
| 95.7 inches*Fenders [243 cm] | |
| Length | 264.5 inches [671 cm] |
| Max weight | 34000 lbs [15422 kg] |
| Width | 52 inches*Frame [132 cm] |
| Ag front | 23.1-34 |
|---|---|
| 23.1-30 | |
| 20.8-38 | |
| 18.4-34 | |
| 23.1-30 | |
| 24.5-32 | |
| Ag front | 18.4-30 |
| Ag rear | 18.4-30 |
| 24.5-32 | |
| 18.4-38 | |
| 20.8-38 | |
| Ag rear | 23.1-34 |
| 20.8-34 | |
| 20.8-34 | |
| 32.5-32 | |
| 32.5-32 | |
| 18.4-38 | |
| 18.4-34 |
Engine Specifications of Steiger, Panther III PTA-325
Get the specifications for the engine and if different options are available.
| Caterpillar 3406 |
| Liquid-cooled inline |
| 6-cylinder |
| Turbocharged diesel |
| Coolant capacity | 52 qts [49.2 L] |
|---|---|
| Oil capacity | 36 qts [34.1 L] |
| Fuel system | Direct injection |
| Idle RPM | 600-2300 |
| Rated RPM | 2100 |
| Displacement | 893 ci [14.6 L] |
| Power | 325 hp [242.4 kW] |
| Compression | 14.5:1 |
| Bore/Stroke | 5.4x6.5 inches [137 x 165 mm] |
| Starter volts | 12 |
| Torque RPM | 1200 |
| Torque | 1015 lb-ft [1376.3 Nm] |
Transmission Information of Steiger, Panther III PTA-325Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Allison HT 754 |
|---|---|
| Type | Power shift with torque converter |
| Gears | 10 forward and 2 reverse |
Transmission variants 2
Mechanical Specs of Steiger, Panther III PTA-325Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Safari Cab standard with air-conditioning. |
| Hydraulic disc brakes |
| Articulated power steering |
| Final drives | Outboard planetary |
|---|
Power Information of Steiger, Panther III PTA-325Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Engine | 325 hp [242.4 kW] |
|---|
Hydraulics Specifications of Steiger, Panther III PTA-325
Hydraulic system type, pressure, pump flow and valves.
| 20 gpm*Maximum [75.7 lpm] | |
| Type | Open center |
| Pump flow | 29.3 gpm [110.9 lpm] |
| Valves | 3 to 5 |
| Capacity | 22 gal [83.3 L] |
| SCV flow | 8 gpm*Minimum [30.3 lpm] |
| Pressure | 2250 psi [155.1 bar] |
Three-Point Hitch of Steiger, Panther III PTA-325
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|
Electrical System of Steiger, Panther III PTA-325
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 475 |
| Batteries | 4 |
| Charging system | Delco-Remy alternator |
| Battery volts | 12 |
| Charging amps | 90 |
Frequently asked questions
How much horsepower does the Steiger Panther III PTA-325 have?
The Steiger Panther III PTA-325 delivers 325 HP.
What years was the Steiger Panther III PTA-325 produced?
The Steiger Panther III PTA-325 was produced in 1980-1982.
What engine does the Steiger Panther III PTA-325 have?
The Steiger Panther III PTA-325 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the Steiger Panther III PTA-325 use?
The Steiger Panther III PTA-325 uses a Allison HT 754 transmission.
How much does the Steiger Panther III PTA-325 weigh?
The Steiger Panther III PTA-325 weighs 29605 lbs [13428 kg].
Is the Steiger Panther III PTA-325 4WD?
The Steiger Panther III PTA-325 is available in 4WD.